Home Bently Nevada 3300 Series Monitoring System

3300 XL 25 mm Extension Cable | 330854-40-24-00 | Bently Nevada

3300 XL 25 mm Extension Cable | 330854-40-24-00 | Bently Nevada


In Stock Original New Unused Bently Nevada 330854-40-24-00 3300 XL 25 mm Extension Cable



  • Product Condition

    Original New with One Year Warranty
  • Parts Available

    In Stock and Same Day Shipping
  • Delivery Mode

    Shipping via DHL Fedex or UPS etc
  • Email:

    sales1@amikon.cn
  • Whatsapp/Mob:

    +86 18150117685
Description
Key Highlights
Manufacturer: Bently Nevada
Model Number: 330854-40-24-00
Product Type: 3300 XL 25 mm Extension Cable
Availability: In Stock
Condition: Original New
Country of Origin: USA

Technical Specifications


Model 330854-40-24-00 is a Bently Nevada 3300 XL 25 mm Extension Cable. This product is mainly used for monitoring shaft vibration, shaft displacement, and high-frequency signal transmission in large rotating machinery such as steam turbines, compressors, and fans.


Manufacturer

Bently Nevada

Article number

330854-40-24-00

Type

3300 XL 25 mm Extension Cable

Cable Length Option

4.0 metres (13.1 feet)

Armor and Cable Option

High Temperature FluidLoc cable

Agency Approval Option

No Approvals

Output Resistance

50 Ω

Resistance from Center Conductor to Center Conductor (ohms)

1.0 ± 0.25

Resistance from Coaxial Conductor to Coaxial Conductor (ohms)

0.3 ± 0.1

Extension Cable Capacitance

69.9 pF/m (21.3 pF/ft) typical

Field Wiring

0.2 to 1.5 mm² (16 to 24 AWG) [0.25 to 0.75 mm² (18 to 23 AWG) with ferrules]

Linear Range

12.7 mm (500 mils)

Extension Cable Material

75 Ω triaxial, perfluoroalkoxyethylene (PFA) insulated FluidLoc cable

Probe and Extension Cable Armor (Optional)

Flexible AISI 302 SST with PFA outer jacket

System Mass (Typical)

45 g/m (0.5 oz/ft)

Operating and Storage Temperature

-35°C to +200°C (-31°F to +392°F)


Core Technical Specifications


Electrical Parameters: Typical capacitance per meter of cable is 69.9 pF/m (21.3 pF/ft). The core conductor resistance is approximately 1.0 Ω ± 0.25 Ω, and the outer jacket shielding layer resistance is approximately 0.3 Ω ± 0.1 Ω.

FluidLoc Patented Technology: Possesses extremely strong resistance to oil penetration and moisture, effectively preventing lubricating oil inside the bearing housing from leaking into the non-expansion area of the preamplifier end along the cable core.


Electrical Parameters and Troubleshooting

Center Conductor: Using a multimeter, measure the resistance of the center pin at both ends of the cable's physical connector. A standard resistance of 4.0 meters should be between 1.0 Ω ± 0.25 Ω. If the resistance approaches infinity, it indicates that the internal copper core has been broken.

Insulation Resistance: Measure the insulation resistance between the center pin and the outer shell. Under normal conditions, it must be infinite. If the reading is only a few thousand ohms or a few megaohms, it indicates that lubricating oil, moisture, or metal debris has seeped into the ClickLoc connector, causing a signal short circuit or leakage.

Technical FAQ


Q: Why does the 330854-40-24-00 use FluidLoc anti-fluid technology?
A: This technology effectively prevents lubricating oil or moisture from seeping out through the internal gaps of the cable.

Q: What is the highest field operating temperature that the 330854-40-24-00 can withstand?
A: Its operating and storage environment temperature can withstand up to 200 degrees Celsius.

Q: What material is used for the insulation layer of the internal conductors of the 330854-40-24-00?
A: It uses high-quality PFA (perfluoroalkoxy resin) material with extremely strong chemical inertness.

Q: What is the structural impedance of the internal coaxial cable of the 330854-40-24-00?
A: Standard 75-ohm RF coaxial triaxial cable structure.


Q: Are your products brand new?
A: Yes. We only supply 100% original and brand-new products. All items are sourced through authorized channels and have never been used or refurbished.

Q: Why can customers buy with confidence?
A: Because every product is backed by our 1-Year Warranty Guarantee of Quality, ensuring reliability, customer satisfaction, and long-term support after delivery.

Q: Do you provide international shipping?
A: Yes. We ship products to customers worldwide using reliable international logistics services such as EMS, DHL, UPS, and FedEx.


Trusted by 5,000+ plants worldwide |  Contact for more Bently Nevada spares: sales1@amikon.cn

You May Also Like:


330854-040-24-00

330881-01-00-000-00-02

330780-51-00

330854-040-24-CN

330881-16-00-060-01-02

330780-51-05

330854-080-24-00

330881-16-00-175-00-02

330780-90-05

330854-080-25-05

330881-16-00-200-06-02

330780-91-05

330854-080-24-05

330881-16-00-307-06-02

330780-91-CN

330876-01-90-00-00

330881-16-00-395-06-02

330800-16-00-039-03-02

330877-080-37-00

330881-28-00-100-06-02

330800-16-15-020-01-02

330877-80-37-00

330881-28-00-165-07-02

330800-16-15-020-02-02

330878-90-00

330881-28-04-034-06-02

330800-28-00-085-02-02

330878-90-05

330881-28-04-080-03-02

330850-51-00

330878-91-00

330881-28-04-110-06-02

330850-90-00

330878-91-05

330881-28-04-145-03-02

330850-90-CN

330880-00-20-038-00-02

330881-28-04-145-06-02

330850-91-00

330880-16-00-060-03-02

330881-28-04-150-00-02

330850-91-05

330880-16-15-020-01-02

330881-28-04-150-06-02

330851-02-000-030-10-00-05

330880-16-15-020-02-02

330881-28-04-70-03-02

330851-02-000-050-50-00-05

330880-28-15-035-00-02

330881-28-04-85-03-02

330851-02-000-066-10-00-00

330880-28-20-038-00-02

330881-28-05-035-01-02

330851-02-000-080-10-00-00

330880-28-35-017-00-02

330881-28-05-060-00-02

330851-02-000-60-10-00-05

330880-RU-50-028-03-02

330881-28-05-090-00-02

330851-04-000-030-10-01-00

We found other products you might like!

330400-01-CN Bently Nevada Accelerometer Acceleration Transducer
330400-01-CN Bently Nevada Accelerometer Acceleration Transducer
Bently Nevada · 330400 Accelerometer 330400-01-CN 330400-01-CN is a Bently Nevada 330400 accelerometer with a 1/4-28 UNF integral stud and the OEM-listed CN country-specific option for China. Type accelerometer acceleration transducer Family 330400 Accelerometer Scope Component Source OEM Verified ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 330400-01-CN against the installed machinery system Application Fit Maintenance of the documented 330400 Accelerometer installation Like-for-like replacement using the complete part number Machinery monitoring applications supported by the cited OEM document Verify Before Order Complete part number 330400-01-CN Mounting, power, signal and interface compatibility Approval, rack, cable and companion-module requirements Scope note: 330400-01-CN identifies Compatible three-conductor cable, excitation and monitoring input required
330400-02-CN Bently Nevada Accelerometer Acceleration Transducer
330400-02-CN Bently Nevada Accelerometer Acceleration Transducer
Bently Nevada · 330400 Accelerometer 330400-02-CN 330400-02-CN is a Bently Nevada 330400 accelerometer with an M8 x 1 integral stud and the OEM-listed CN country-specific option for China. Type accelerometer acceleration transducer Family 330400 Accelerometer Scope Component Source OEM Verified ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 330400-02-CN against the installed machinery system Application Fit Maintenance of the documented 330400 Accelerometer installation Like-for-like replacement using the complete part number Machinery monitoring applications supported by the cited OEM document Verify Before Order Complete part number 330400-02-CN Mounting, power, signal and interface compatibility Approval, rack, cable and companion-module requirements Scope note: 330400-02-CN identifies Compatible three-conductor cable, excitation and monitoring input required
330930-040-00-00 Bently Nevada 3300 NSv Extension Cable
330930-040-00-00 Bently Nevada 3300 NSv Extension Cable
Bently Nevada · 3300 XL NSv 330930-040-00-00 330930-040-00-00 is a 4.0 m (13.1 ft) Bently Nevada 3300 NSv extension cable configured as standard cable without stainless-steel armor or connector protector and agency approval option not required. 330930-040-00-00 links a compatible 3300 NSv probe to a 3300 XL NSv Proximitor Sensor. The probe lead plus the extension-cable length must equal the ordered 5.0 m or 7.0 m system length; 330930-040-00-00 is a cable component, not a complete transducer system. Component 3300 NSv extension cable Length 4.0 m (13.1 ft) Construction Standard cable without stainless-steel armor or connector protector Approval option Agency approval option not required Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch cable length to the NSv measurement chain Application Fit 3300 NSv probe-to-Proximitor connection Matched 5 m or 7 m NSv system build Installations requiring the ordered cable construction Verify Before Order Confirm the complete 330930 order code Confirm probe lead plus cable equals 5 m or 7 m Confirm construction, connector protector and approval option Scope note: 330930-040-00-00 is the extension cable only. 330930-040-00-00 does not include a probe or Proximitor Sensor and is not a complete measurement system.
330930-040-01-00 Bently Nevada 3300 NSv Extension Cable
330930-040-01-00 Bently Nevada 3300 NSv Extension Cable
Bently Nevada · 3300 XL NSv 330930-040-01-00 330930-040-01-00 is a 4.0 m (13.1 ft) Bently Nevada 3300 NSv extension cable configured as standard cable with stainless-steel armor and fep jacket; no connector protector and agency approval option not required. 330930-040-01-00 links a compatible 3300 NSv probe to a 3300 XL NSv Proximitor Sensor. The probe lead plus the extension-cable length must equal the ordered 5.0 m or 7.0 m system length; 330930-040-01-00 is a cable component, not a complete transducer system. Component 3300 NSv extension cable Length 4.0 m (13.1 ft) Construction Standard cable with stainless-steel armor and FEP jacket; no connector protector Approval option Agency approval option not required Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch cable length to the NSv measurement chain Application Fit 3300 NSv probe-to-Proximitor connection Matched 5 m or 7 m NSv system build Installations requiring the ordered cable construction Verify Before Order Confirm the complete 330930 order code Confirm probe lead plus cable equals 5 m or 7 m Confirm construction, connector protector and approval option Scope note: 330930-040-01-00 is the extension cable only. 330930-040-01-00 does not include a probe or Proximitor Sensor and is not a complete measurement system.
40113-02 Bently Nevada 3300 XL Connector Protector Kit
40113-02 Bently Nevada 3300 XL Connector Protector Kit
Bently Nevada · 3300 XL 8 mm Proximity Transducer Accessories 40113-02 40113-02 is a Bently Nevada Connector Protector Kit for 3300 XL 8 mm probes and extension cables, including connector protectors and installation tools. 40113-02 provides environmental protection at compatible connector interfaces. 40113-02 is an accessory only, not a complete proximity transducer system, and it does not include a probe, extension cable, Proximitor Sensor or monitor. Accessory Connector Protector Kit OEM package Protectors and installation tools Compatibility 3300 XL 8 mm probe and extension-cable connectors Purpose Environmental protection of compatible connector interfaces Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact OEM component and installed configuration Application Fit Connector protection and installation 3300 XL proximity-chain maintenance Exact accessory replacement planning Verify Before Order Confirm the complete 40113-02 identification Confirm the exact component role and listed option Confirm companion equipment and installed-system requirements Scope note: 40113-02 does not replace or include any electrical transducer-chain component.
40180-02 Bently Nevada 3300 XL Connector Protectors
40180-02 Bently Nevada 3300 XL Connector Protectors
Bently Nevada · 3300 XL 8 mm Proximity Transducer Accessories 40180-02 40180-02 is a Bently Nevada Connector protectors for 3300 XL 8 mm probes and extension cables, packaged as 10 pairs. 40180-02 provides environmental protection at compatible connector interfaces. 40180-02 is an accessory only, not a complete proximity transducer system, and it does not include a probe, extension cable, Proximitor Sensor or monitor. Accessory Connector protector package OEM package 10 pairs of protectors Compatibility 3300 XL 8 mm probe and extension-cable connectors Purpose Environmental protection of compatible connector interfaces Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact OEM component and installed configuration Application Fit Connector protection and installation 3300 XL proximity-chain maintenance Exact accessory replacement planning Verify Before Order Confirm the complete 40180-02 identification Confirm the exact component role and listed option Confirm companion equipment and installed-system requirements Scope note: 40180-02 does not replace or include any electrical transducer-chain component.
81544-01 Bently Nevada No-Relay I/O Module for 3300/16
81544-01 Bently Nevada No-Relay I/O Module for 3300/16
Bently Nevada · 3300/16 81544-01 81544-01 is a legacy Bently Nevada 3300-series signal-input/relay module with no relays identified by the OEM spare-parts table for the 3300/16 XY/Gap Dual Vibration Monitor. 81544-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/16 Family 3300/16 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 81544-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/16 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 81544-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 81544-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
81545-01 Bently Nevada Epoxy Relay Module for 3300/16
81545-01 Bently Nevada Epoxy Relay Module for 3300/16
Bently Nevada · 3300/16 81545-01 81545-01 is a legacy Bently Nevada 3300-series signal-input/dual-relay module identified by the OEM spare-parts table for the 3300/16 XY/Gap Dual Vibration Monitor. 81545-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/16 Family 3300/16 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 81545-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/16 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 81545-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 81545-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.

What Our Clients Say?

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry

Email us : sales1@amikon.cn

Reply within one working day

Visit us

32D Guomao Building, No.388, Hubin South Road, Siming District

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Contact Us
Location 32D Guomao Building, No.388, Hubin South Road, Siming District

Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.



Copyright @2026 SalesPlc Limited. Sitemap / Blog / XML / Terms And Conditions / Privacy Policy Network Supported

vk YouTube Tiktok Pinterest Reddit teitter linkedin. facebook

leave a message

leave a message
Feel free to communicate any order concerns – we provide quality products and best service.
submit

Home

Products

whatsApp

Contact Us

About Us

Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.

Where to Find Us

32D Guomao Building, No.388, Hubin South Road, Siming District +86 18150117685 sales1@amikon.cn

Follow Us