banner

Products

New Products

Products

Siemens S5 Series、S7 Series、6DD Series、6DP Series
  • 6AV3503-1DB10 Siemens SIMATIC OP3 Operator Panel
    Siemens · SIMATIC HMI OP3 6AV3503-1DB10 6AV3503-1DB10 is a Siemens SIMATIC OP3 operator panel with a two-line, 20-character STN display, membrane keypad, MPI interface and RS232 configuration interface. Siemens specifies 24 VDC nominal supply, a 148 x 76 x 27 mm front panel and IP65 protection at the front when the gasket is correctly installed. Type SIMATIC OP3 operator panel Family SIMATIC HMI OP3 Platform Siemens SIMATIC HMI Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 6AV3503-1DB10 against the installed Siemens configuration Application Fit Maintenance of the documented SIMATIC HMI OP3 installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 6AV3503-1DB10 Hardware revision, firmware and project compatibility verify the panel cutout, 24 VDC supply, MPI/PPI network parameters, controller type, cable and legacy ProTool project compatibility. Scope note: 6AV3503-1DB10 is an operator panel, not a PLC or complete automation system. Only manufacturer-documented component data is stated on this page.
    Read More +
  • 6AR1304-0CA00-0AA0 Siemens SICOMP SMP16-SFT304 Module
    Siemens · SICOMP SMP16 6AR1304-0CA00-0AA0 6AR1304-0CA00-0AA0 is Siemens product designation SMP16-SFT304 for the SICOMP SMP16 industrial microcomputer platform. Siemens technical documentation identifies SMP16-SFT304 as a separate interrupt controller board on the SMP16 bus; it is a legacy, deleted product and must be matched by complete MLFB and system configuration. Type SICOMP SMP16-SFT304 interrupt controller board Family SICOMP SMP16 Platform Siemens SICOMP SMP16 industrial microcomputer Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 6AR1304-0CA00-0AA0 against the installed Siemens configuration Application Fit Maintenance of the documented SICOMP SMP16 installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 6AR1304-0CA00-0AA0 Hardware revision, firmware and project compatibility verify the SMP16 CPU generation, bus slot, interrupt routing, software support and the complete MLFB before installation. Scope note: 6AR1304-0CA00-0AA0 is an SMP16 bus interrupt controller board, not a standalone controller system. Only manufacturer-documented component data is stated on this page.
    Read More +
  • APOGEE Power Open Processor | 562-001 | Siemens
    In Stock Original New Unused Siemens 562-001 APOGEE Power Open Processor
    Read More +
  • 505-7003 Siemens SIMATIC TI505 Counter Encoder Module
    Siemens · SIMATIC TI505 505-7003 505-7003 is a Siemens SIMATIC TI505 high-speed counter encoder I/O module. Siemens specifies two channels with six counters total-one 24-bit counter and two 16-bit counters per channel-plus eight discrete outputs, quadrature and non-quadrature modes, and a 100 kHz default input filter. Type SIMATIC TI505 high-speed counter encoder module Family SIMATIC TI505 Platform Siemens SIMATIC TI505 PLC system Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 505-7003 against the installed Siemens configuration Application Fit Maintenance of the documented SIMATIC TI505 installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 505-7003 Hardware revision, firmware and project compatibility verify the TI505 base, supported CPU release, terminal block, field input level, external 24 VDC output supply, jumper configuration and ladder-logic configuration. Scope note: 505-7003 is a single-wide TI505 I/O module, not a PLC CPU or complete system. Only manufacturer-documented component data is stated on this page.
    Read More +
  • 500-033260 Siemens DPU Device Programmer Test Unit
    Siemens · Siemens Fire Safety Device Programming Units 500-033260 500-033260 is Siemens model DPU, a compact portable device programmer and test unit for FireFinder XLS and MSL devices. Siemens states that 500-033260 electronically programs and tests compatible detectors before installation through device microcomputer-chip non-volatile memory; it is an accessory, not a detector or control panel. Type DPU device programmer and test unit for FireFinder XLS and MSL devices Family Siemens Fire Safety Device Programming Units Platform Siemens FireFinder XLS and MSL device ecosystem Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 500-033260 against the installed Siemens configuration Application Fit Maintenance of the documented Siemens Fire Safety Device Programming Units installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 500-033260 Hardware revision, firmware and project compatibility verify the target detector/device family, current instructions, battery/charger condition, firmware compatibility and the fire-system commissioning procedure. Scope note: 500-033260 is a portable programming/test accessory, not a detector or fire alarm control panel. Only manufacturer-documented component data is stated on this page.
    Read More +
  • 39VIMCCN A5E00282175/07 Siemens APACS+ Voltage Input
    Siemens · APACS+ 39VIMCCN A5E00282175/07 39VIMCCN A5E00282175/07 is a Siemens Moore APACS+ voltage input module. Siemens official lifecycle material confirms the base model 39VIMCCN and product type, while A5E00282175/07 must be treated as a unit-specific assembly or revision identifier and matched to the nameplate. Use 39VIMCCN A5E00282175/07 only as a like-for-like legacy spare after rack, wiring, termination and firmware checks. Type Moore APACS+ voltage input module Family APACS+ Platform Siemens Moore APACS+ process control system Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 39VIMCCN A5E00282175/07 against the installed Siemens configuration Application Fit Maintenance of the documented APACS+ installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 39VIMCCN A5E00282175/07 Hardware revision, firmware and project compatibility verify the APACS+ rack, IOBUS/M-BUS context, termination assembly, field wiring, firmware or ROM revision, and the complete nameplate identifier before energizing or substitution. Scope note: 39VIMCCN A5E00282175/07 is a voltage input module. Only manufacturer-documented component data is stated on this page.
    Read More +
  • 39VIMCCN 16171-126/6 Siemens APACS+ Voltage Input
    Siemens · APACS+ 39VIMCCN 16171-126/6 39VIMCCN 16171-126/6 is a Siemens Moore APACS+ voltage input module. Siemens official lifecycle material confirms the base model 39VIMCCN and product type, while 16171-126/6 must be treated as a unit-specific assembly or revision identifier and matched to the nameplate. Use 39VIMCCN 16171-126/6 only as a like-for-like legacy spare after rack, wiring, termination and firmware checks. Type Moore APACS+ voltage input module Family APACS+ Platform Siemens Moore APACS+ process control system Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 39VIMCCN 16171-126/6 against the installed Siemens configuration Application Fit Maintenance of the documented APACS+ installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 39VIMCCN 16171-126/6 Hardware revision, firmware and project compatibility verify the APACS+ rack, IOBUS/M-BUS context, termination assembly, field wiring, firmware or ROM revision, and the complete nameplate identifier before energizing or substitution. Scope note: 39VIMCCN 16171-126/6 is a voltage input module. Only manufacturer-documented component data is stated on this page.
    Read More +
  • 39VIMCCN 16171-126/3 Siemens APACS+ Voltage Input
    Siemens · APACS+ 39VIMCCN 16171-126/3 39VIMCCN 16171-126/3 is a Siemens Moore APACS+ voltage input module. Siemens official lifecycle material confirms the base model 39VIMCCN and product type, while 16171-126/3 must be treated as a unit-specific assembly or revision identifier and matched to the nameplate. Use 39VIMCCN 16171-126/3 only as a like-for-like legacy spare after rack, wiring, termination and firmware checks. Type Moore APACS+ voltage input module Family APACS+ Platform Siemens Moore APACS+ process control system Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 39VIMCCN 16171-126/3 against the installed Siemens configuration Application Fit Maintenance of the documented APACS+ installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 39VIMCCN 16171-126/3 Hardware revision, firmware and project compatibility verify the APACS+ rack, IOBUS/M-BUS context, termination assembly, field wiring, firmware or ROM revision, and the complete nameplate identifier before energizing or substitution. Scope note: 39VIMCCN 16171-126/3 is a voltage input module. Only manufacturer-documented component data is stated on this page.
    Read More +
  • 39SDM024DCCBN 16101-174/8 Siemens APACS+ Discrete Module
    Siemens · APACS+ 39SDM024DCCBN 16101-174/8 39SDM024DCCBN 16101-174/8 is a Siemens Moore APACS+ standard discrete 24 V module. Siemens official lifecycle material confirms the base model 39SDM024DCCBN and product type, while 16101-174/8 must be treated as a unit-specific assembly or revision identifier and matched to the nameplate. Use 39SDM024DCCBN 16101-174/8 only as a like-for-like legacy spare after rack, wiring, termination and firmware checks. Type Moore APACS+ standard discrete 24 V module Family APACS+ Platform Siemens Moore APACS+ process control system Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 39SDM024DCCBN 16101-174/8 against the installed Siemens configuration Application Fit Maintenance of the documented APACS+ installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 39SDM024DCCBN 16101-174/8 Hardware revision, firmware and project compatibility verify the APACS+ rack, IOBUS/M-BUS context, termination assembly, field wiring, firmware or ROM revision, and the complete nameplate identifier before energizing or substitution. Scope note: 39SDM024DCCBN 16101-174/8 is a standard discrete 24 V module. Only manufacturer-documented component data is stated on this page.
    Read More +
  • 39SDM024DCCBN 16101-174/12 Siemens APACS+ Discrete Module
    Siemens · APACS+ 39SDM024DCCBN 16101-174/12 39SDM024DCCBN 16101-174/12 is a Siemens Moore APACS+ standard discrete 24 V module. Siemens official lifecycle material confirms the base model 39SDM024DCCBN and product type, while 16101-174/12 must be treated as a unit-specific assembly or revision identifier and matched to the nameplate. Use 39SDM024DCCBN 16101-174/12 only as a like-for-like legacy spare after rack, wiring, termination and firmware checks. Type Moore APACS+ standard discrete 24 V module Family APACS+ Platform Siemens Moore APACS+ process control system Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 39SDM024DCCBN 16101-174/12 against the installed Siemens configuration Application Fit Maintenance of the documented APACS+ installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 39SDM024DCCBN 16101-174/12 Hardware revision, firmware and project compatibility verify the APACS+ rack, IOBUS/M-BUS context, termination assembly, field wiring, firmware or ROM revision, and the complete nameplate identifier before energizing or substitution. Scope note: 39SDM024DCCBN 16101-174/12 is a standard discrete 24 V module. Only manufacturer-documented component data is stated on this page.
    Read More +
  • 39SAMCAN 16133-71/9 Siemens APACS+ Analog Module
    Siemens · APACS+ 39SAMCAN 16133-71/9 39SAMCAN 16133-71/9 is a Siemens Moore APACS+ standard analog module. Siemens official lifecycle material confirms the base model 39SAMCAN and product type, while 16133-71/9 must be treated as a unit-specific assembly or revision identifier and matched to the nameplate. Use 39SAMCAN 16133-71/9 only as a like-for-like legacy spare after rack, wiring, termination and firmware checks. Type Moore APACS+ standard analog module Family APACS+ Platform Siemens Moore APACS+ process control system Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 39SAMCAN 16133-71/9 against the installed Siemens configuration Application Fit Maintenance of the documented APACS+ installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 39SAMCAN 16133-71/9 Hardware revision, firmware and project compatibility verify the APACS+ rack, IOBUS/M-BUS context, termination assembly, field wiring, firmware or ROM revision, and the complete nameplate identifier before energizing or substitution. Scope note: 39SAMCAN 16133-71/9 is a standard analog module. Only manufacturer-documented component data is stated on this page.
    Read More +
  • 39SAMCAN 16133-71/8 Siemens APACS+ Analog Module
    Siemens · APACS+ 39SAMCAN 16133-71/8 39SAMCAN 16133-71/8 is a Siemens Moore APACS+ standard analog module. Siemens official lifecycle material confirms the base model 39SAMCAN and product type, while 16133-71/8 must be treated as a unit-specific assembly or revision identifier and matched to the nameplate. Use 39SAMCAN 16133-71/8 only as a like-for-like legacy spare after rack, wiring, termination and firmware checks. Type Moore APACS+ standard analog module Family APACS+ Platform Siemens Moore APACS+ process control system Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 39SAMCAN 16133-71/8 against the installed Siemens configuration Application Fit Maintenance of the documented APACS+ installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 39SAMCAN 16133-71/8 Hardware revision, firmware and project compatibility verify the APACS+ rack, IOBUS/M-BUS context, termination assembly, field wiring, firmware or ROM revision, and the complete nameplate identifier before energizing or substitution. Scope note: 39SAMCAN 16133-71/8 is a standard analog module. Only manufacturer-documented component data is stated on this page.
    Hot Tags : 39SAMCAN 16133-71/8
    Read More +
1 2 3
A total of3pages

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry

Email us

Reply within one working day

Visit us

32D Guomao Building, No.388, Hubin South Road, Siming District

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Hot Tags
Contact Us
Location 32D Guomao Building, No.388, Hubin South Road, Siming District

Disclaimer : Featuredplc sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Featuredplc is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.



Copyright @2024 SalesPlc Limited. Sitemap / Blog / XML / Terms And Conditions / Privacy Policy Network Supported

vk YouTube Tiktok Pinterest Reddit teitter linkedin. facebook
leave a message
Feel free to communicate any order concerns – we provide quality products and best service.
submit

Home

Products

whatsApp

Contact Us

About Us

Featuredplc has a team of experienced professionals working closely with overseas suppliers to provide our customers with a wide selection of products to meet their needs about delivery, price and brands . Featuredplc advantage lies not only in our ability to provide products, but also in our ability to establish close links with direct users, system integrators and provide professional spare parts solutions to enhance customers' competitiveness in their own markets. Integrated procurement, online component solutions at any time, 24/7 and 365 days a year to place orders. To meet the specific needs of many manufacturing customers, we have deployed a range of supplies,With our multi-channel distribution network and strong warehouse support, we are able to optimize the supply chain and provide competitive prices. 20 years ago, we set sail with a dream,20 years later, we are shouldering more hopes and expectations. Thanks to every friend who supports us, it is your trust that keeps us moving forward. Looking back, we are grateful; looking forward to the future, we are full of confidence! Celebrate the 20th anniversary together and welcome a more brilliant tomorrow! We will continue to provide the best service and quality assurance to our customers all over the world in the coming days, welcome to inquire for the latest discount offer!     Our warehouse is capable of holding up to 60,000 pallet spare parts as a regional hub, enabling us to store a wide range of products. This improves efficiency by providing our customers in the global region with faster delivery times and lower prices. Sustainable Partnership   Featuredplc is committed to building sustainable partnerships with customers and suppliers. It's a win-win-win situation. Sustainability also means responding to trends, evolution and innovation. This flexibility is also a guarantee of the future.We always focus on top brand products, top industrial partners innovation and industrial automation in the delivery of new components. Our sales office ensures that your to inquiries about spare parts are responsive. We actively participate in the customer's search for spare parts solutions or provide customized delivery advice. The customer's spare parts demand or delivery time question is always important to us.   + Availability, + Responsiveness: Your satisfaction is our top priority!   Featuredplc spare parts supply chain ensures your optimization of the delivery cycle of industrial parts.

Where to Find Us

32D Guomao Building, No.388, Hubin South Road, Siming District +86 15359408275 sales5@mooreplc.com

Follow Us