330101-00-18-10-02-05 Bently Nevada 8 mm Proximity Probe
330101-00-18-10-02-05
330101-00-18-10-02-05 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF threads and without cable armor. 330101-00-18-10-02-05 specifies a 0.0 in unthreaded length, 1.8 in overall case length, 1.0 m (3.3 ft) total lead length, Miniature coaxial ClickLoc without connector protector; standard cable, and CSA, ATEX and IECEx multiple-approvals option; verify current certificate and installation applicability. 330101-00-18-10-02-05 is the probe component, not a complete transducer system.
Scope note: 330101-00-18-10-02-05 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales1@amikon.cnWhatsapp/Mob:
+86 18150117685Non-armored 3300 XL 8 mm Proximity Probe
The Bently Nevada 330101-00-18-10-02-05 is a non-armored, standard-mount 3300 XL 8 mm proximity probe. The official ordering code specifies 3/8-24 UNF threads, a 0.0 in unthreaded length, a 1.8 in overall case length, a 1.0 m (3.3 ft) total probe lead, and a miniature coaxial ClickLoc connector without connector protector using standard cable.
The final 05 option on 330101-00-18-10-02-05 specifies CSA, ATEX and IECEx multiple-approvals option; verify current certificate and installation applicability. Approval markings do not by themselves establish compliance for every installation; current certificates, entity parameters and destination-country requirements must be checked.
The catalog number 330101-00-18-10-02-05 identifies the probe only. For 330101-00-18-10-02-05, Connect directly for a 1 m system, add a 4.0 m extension cable for a 5 m system, or add an 8.0 m extension cable for a 9 m system. Published range, scale factor and frequency response apply to the complete matched 3300 XL 8 mm system rather than to 330101-00-18-10-02-05 alone.
| Manufacturer | Bently Nevada, a Baker Hughes company |
|---|---|
| Full part number | 330101-00-18-10-02-05 |
| Component scope | Proximity probe only; not a complete transducer system |
| Product family | 3300 XL 8 mm Proximity Transducer System |
| Mounting / armor | Standard mount; without armor |
| Probe tip | 8.0 mm (0.31 in); polyphenylene sulfide (PPS) |
| Case / thread | AISI 303 or 304 stainless steel; 3/8-24 UNF |
| Unthreaded length | 0.0 in |
| Overall case length | 1.8 in |
| Total probe lead length | 1.0 m (3.3 ft) |
| Cable | 75 ohm triaxial FEP-insulated standard probe cable |
| Connector | Miniature coaxial ClickLoc without connector protector |
| Agency option | CSA, ATEX and IECEx multiple-approvals option; verify current certificate and installation applicability |
| Approval reference | Baker Hughes 141194 Rev. AM |
| Nominal probe DC resistance | 7.59 ohm +/-0.50 ohm for 1.0 m probe length |
| Probe operating / storage temperature | -52°C to +177°C (-62°F to +350°F); exposure below -34°C may cause premature pressure-seal failure |
| Minimum cable bend radius | 25.4 mm (1.0 in) |
| Maximum thread engagement | 0.563 in |
| System matching | For 330101-00-18-10-02-05, Connect directly for a 1 m system, add a 4.0 m extension cable for a 5 m system, or add an 8.0 m extension cable for a 9 m system. |
| Complete-system linear range | 2 mm (80 mils), approximately 0.25 to 2.3 mm; not a probe-alone value |
| Complete-system scale factor | Nominal 7.87 V/mm (200 mV/mil); published tolerance depends on the matched system length and official test conditions |
| Official document | Baker Hughes 141194 Rev. AM |
The family remains covered by current Baker Hughes documentation. Exact configuration availability, condition and lead time must be confirmed separately; documentation alone is not a lifecycle declaration.
330101-00-18-10-02-05 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF threads and without cable armor. 330101-00-18-10-02-05 is a probe component, not a complete transducer system.
330101-00-18-10-02-05 uses 3/8-24 UNF case threads. The mounting geometry and maximum thread engagement for 330101-00-18-10-02-05 must be verified before replacement.
330101-00-18-10-02-05 is supplied without cable armor. The armor configuration is defined by the 330101 base code in 330101-00-18-10-02-05.
330101-00-18-10-02-05 has a 0.0 in unthreaded length and a 1.8 in overall case length. Both dimensions are decoded directly from the AA and BB fields of 330101-00-18-10-02-05.
330101-00-18-10-02-05 has a 1.0 m (3.3 ft) total probe lead with Miniature coaxial ClickLoc without connector protector; standard cable. The option code 02 defines this cable and connector configuration for 330101-00-18-10-02-05.
330101-00-18-10-02-05 uses approval suffix 05. The final -05 selects the CSA, ATEX and IECEx multiple-approvals option, subject to current certificate and installation requirements. Approval applicability for 330101-00-18-10-02-05 must be checked against current certificates and installation conditions.
330101-00-18-10-02-05 can be configured for a 1 m or 5 m or 9 m complete 3300 XL 8 mm system. For 330101-00-18-10-02-05, Connect directly for a 1 m system, add a 4.0 m extension cable for a 5 m system, or add an 8.0 m extension cable for a 9 m system.
A complete, correctly matched 3300 XL 8 mm system using 330101-00-18-10-02-05 has a published 2 mm linear range and nominal 7.87 V/mm (200 mV/mil) scale factor under official test conditions. These values are complete-system performance, not standalone ratings of 330101-00-18-10-02-05.
Send the complete component and matching system part numbers, required electrical length, quantity, target material, approval requirements, destination and clear label photos. Availability and condition will be confirmed before quotation.
Email us
Reply within one working day
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming District
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Disclaimer : Featuredplc sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Featuredplc is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2024 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported
About Us
Featuredplc has a team of experienced professionals working closely with overseas suppliers to provide our customers with a wide selection of products to meet their needs about delivery, price and brands . Featuredplc advantage lies not only in our ability to provide products, but also in our ability to establish close links with direct users, system integrators and provide professional spare parts solutions to enhance customers' competitiveness in their own markets. Integrated procurement, online component solutions at any time, 24/7 and 365 days a year to place orders. To meet the specific needs of many manufacturing customers, we have deployed a range of supplies,With our multi-channel distribution network and strong warehouse support, we are able to optimize the supply chain and provide competitive prices. 20 years ago, we set sail with a dream,20 years later, we are shouldering more hopes and expectations. Thanks to every friend who supports us, it is your trust that keeps us moving forward. Looking back, we are grateful; looking forward to the future, we are full of confidence! Celebrate the 20th anniversary together and welcome a more brilliant tomorrow! We will continue to provide the best service and quality assurance to our customers all over the world in the coming days, welcome to inquire for the latest discount offer! Our warehouse is capable of holding up to 60,000 pallet spare parts as a regional hub, enabling us to store a wide range of products. This improves efficiency by providing our customers in the global region with faster delivery times and lower prices. Sustainable Partnership Featuredplc is committed to building sustainable partnerships with customers and suppliers. It's a win-win-win situation. Sustainability also means responding to trends, evolution and innovation. This flexibility is also a guarantee of the future.We always focus on top brand products, top industrial partners innovation and industrial automation in the delivery of new components. Our sales office ensures that your to inquiries about spare parts are responsive. We actively participate in the customer's search for spare parts solutions or provide customized delivery advice. The customer's spare parts demand or delivery time question is always important to us. + Availability, + Responsiveness: Your satisfaction is our top priority! Featuredplc spare parts supply chain ensures your optimization of the delivery cycle of industrial parts.
Where to Find Us
32D Guomao Building, No.388, Hubin South Road, Siming District
+86 15359408275
sales5@mooreplc.com
Follow Us
