IPSYS01
Harmony Modular Power System II · Modular Power System II unit supplying regulated logic and field voltages for Harmony cabinet hardware.
Lifecycle note: Use the unit nameplate and current official documentation as final references before approving a replacement.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales17@amikon.cnWhatsapp/Mob:
+86 15359408275Harmony Modular Power System II · ABB Harmony / Bailey INFI 90
ABB IPSYS01 is a Harmony Modular Power System II unit that converts a wide AC or DC input into regulated logic and field-power rails for installed cabinet modules.
The official ABB data identifies 5.09 V, positive and negative 15.10 V, and 25.50 V outputs with a combined module-output limit of 260 W.
Before replacement, calculate the installed rail loads, verify input source and protection, bus-bar and chassis connections, airflow, grounding, output polarity and cabinet temperature limits.
| Manufacturer | ABB |
|---|---|
| Model | IPSYS01 |
| Product type | Modular Power System II unit |
| Input voltage | 102-264 VAC or 102-144 VDC |
| Full-load input current at 120 VAC | 4.3 A |
| Full-load input current at 240 VAC | 2.0 A |
| Full-load input current at 125 VDC | 4.3 A |
| Nominal outputs | 5.09 VDC, +15.10 VDC, -15.10 VDC and 25.50 VDC |
| Full-load outputs | 17.0 A, 1.8 A, 1.8 A and 5.6 A respectively |
| Maximum total output power | 260 W |
| Operating enclosure temperature | 0 to 70 deg C internal; 0 to 55 deg C external |
| Operating altitude | Sea level to 3048 m |
ABB IPSYS01 supplies regulated logic and field-power outputs for compatible Harmony cabinet hardware.
ABB IPSYS01 accepts 102 to 264 VAC or 102 to 144 VDC when installed with the documented power-system components and protection.
ABB IPSYS01 provides nominal 5.09 VDC, positive 15.10 VDC, negative 15.10 VDC and 25.50 VDC outputs.
The combined power delivered by ABB IPSYS01 must not exceed the documented 260 W module-output limit, even when individual rail ratings appear sufficient.
Record the actual current on every ABB IPSYS01 output rail, installed cabinet modules, redundancy design, input source and protective devices before replacement.
Commission ABB IPSYS01 by verifying input voltage, output polarity and regulation, ripple, cabinet alarms, load sharing where applicable and temperature under operating load.
Provide the full ABB IPSYS01 label, input supply, output loads, chassis and bus-bar photos, redundancy arrangement, quantity and destination.
Send the complete IPSYS01 catalog number, revision, quantity, destination and nameplate photo. Identification details will be checked before quotation.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming DistrictDisclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported