Description

Key Highlights
Manufacturer: ABB
Model Number: DAI01 P37131-4-0369628
Product Type: Analog Input Module
Availability: In Stock
Condition: Original New
Country of Origin: Switzerland

Technical Specifications

The ABB DAI01 P37131-4-0369628 is an analog input module used primarily within the ABB Freelance 2000 and Contrans I control systems

Detailed Parameter	Part Number: 330101-00-20-10-12-05
Product Type	Analog Input Module
Channels	2 isolated input channels
Input Signal Types	Voltage: 0–10 V; Current: 0–20 mA / 4–20 mA (configurable)
Input Impedance	10 MΩ
Resolution	12-bit
Accuracy	±0.1% FS (typical)
Update Rate	100 Hz
Supply Voltage	24 V DC

Troubleshooting & Commissioning Checklist

Visual Inspection: Verify the module is correctly seated in the base/rack and that all terminal blocks are physically locked in place.
Power Supply: Confirm field power (24 V DC loop) and module power are within the correct tolerances as stated in the ABB DAI01 Analog Input Module specs.
Cable Integrity: Check for continuity, proper shield grounding, and ensure there are no short circuits in the field wiring.
Signal Ranges: Verify that field sensors (transmitters, transducers) match the hardware configuration (Voltage vs. Current modes).

Grounding and Shielding

Individually Isolated Channels: The DAI01 features individually isolated channels, which allows for highly flexible grounding schemes and significantly reduces the risk of cross-talk and ground loops between field devices.
Shield Grounding Clamps: For optimal noise suppression, use dedicated shield grounding plates (or shield terminal blocks) to bond the cable shields directly to the chassis/earth ground right at the entry point of the cabinet.
Single-Point Grounding: Connect the shield of your signal cables at only one end (typically the control cabinet side) to prevent induced ground loop currents from flowing through the shield.

Technical FAQ

Q:What is the DAI01 P37131-4-0369628?
A:The ABB DAI01 (often listed as DAI 01 / Y0369628M) is an analog input module primarily designed for legacy ABB industrial automation platforms, such as the Advant OCS and Freelance 2000 distributed control systems (DCS).

Q:Can the module measure both current and voltage?
A:Yes. The DAI01 supports dual-mode measurement. Each channel can be individually configured for either voltage or current inputs via software or hardware jumpers.

Q:What do I need to know before installing the module?
A:Ensure that the rack power is completely switched off before installation to prevent backplane damage. Verify that your control cabinet's ambient temperature remains within the module's operating parameters.

Q: Do you supply brand-new, original parts or second-hand refurbished items?

A: Our stock consists of Original New items; all products undergo quality inspection to ensure they are fully functional.

Q: What guarantees are included with the shipment?
A: All items in stock are tested by engineers, packed in professional ESD packaging, and shipped via express logistics with a global delivery time of 24–48 hours.

Q: How long does global shipping take?
A: Stock items are typically dispatched within 24 hours. Shipments are sent via DHL or FedEx Express, taking approximately 3–5 days to reach Asia, 4–6 days to Europe and the Middle East, and usually arriving within a week in major industrial regions worldwide.

Q: If the model I need is not listed on the website, can I request a quote?
A: Yes. We hold over 200,000 SKUs of industrial spare parts in stock, and many long-tail models are not listed in full. You can send us an RFQ (Request for Quote) directly, and we will provide wholesale pricing promptly.

Trusted by 5,000+ plants worldwide | Brouse more ABB spares >>

You May Also Like:

3BHE014967R0002	UNS2880B-P,V2	3BHE021083R0101	XVC770 BE101
3BHE015619R0001	XVD825A01	3BHE021887R0101	UBC717BE101
3BHE016011R0002	UNS0118A-Z	3BHE021889R0101	UFC721 BE101
3BHE016011R0006	UNS0118A-Z	3BHE021889R0101	UFC721BE101
3BHE016842R0101	UAD144 A101	3BHE021951R0124	KVC758 A124
3BHE019361R0101	UFD203A101	3BHE022291R0101	PCD230A
3BHE019633R0101	PDD200 A101	3BHE022293R0101	PCD232 A106
3BHE019958R0101	UAD206 A101	3BHE022294R0101	GFD233 A
3BHE020455R0001	PPD103 B01	3BHE022294R0103	GFD233A
3BHE022453R1101	KSD211B101	3BHE027867R0101	GDD852 A101
3BHE025541R0101	PCD231B	3BHE028761R0102	GDC806A102
3BHE026284R0102	UAD215 A102	3BHE028761R2004	GDC806 A2004
3BHE026284R0102	UAD215A102	3BHE029155R0101	PCD237 A101
3BHE026284R0105	UAD215 A105	3BHE028959R0101	PP C902 CE101
3BHE026955R0633	UNS4017A-E VA	3BHE028959R0101	PPC902 CE101

Hot Tags : DAI01 P37131-4-0369628 ABB DAI01 DAI01Analog Input Module

We found other products you might like!

ANALOG INPUT MODULE | DAI 01 Y0369628M | ABB

In Stock Original New Unused The ABB DAI 01 is a 16-channel analog input module for industrial automation. It is primarily utilized within legacy ABB Hartmann & Braun (H&B) Freelance 2000 to integrate field sensors and transducers.

Analog Input Module | DAI04 0369632M-EXC | ABB

In Stock Original New Unused The ABB DAI04 (Part Number: 0369632M-EXC) is an exchange/replacement analog input module for the ABB Freelance 2000 Distributed Control System (DCS).

Analog Input Module | DAI05 0336025MR | ABB

In Stock Original New Unused The ABB DAI 05 0336025MR is an 8-channel Analog Input module designed for ABB Freelance Rack I/O and Freelance 2000 distributed control systems (DCS).

Analog Output Module | DAO01 | ABB

In Stock Original New Unused The ABB DAO01 (often listed as DAO 01) is a high-performance analog output module primarily used in the ABB Freelance 2000 and Hartmann & Braun industrial automation systems

CPU MODULE | DCP02 P37211-4-0369654 | ABB

In Stock Original New Unused The ABB DCP02 (also known as the Hartmann & Braun Digimatik CPU) is a high-performance central processing unit (CPU) module primarily used in the ABB Freelance 2000 distributed control system (DCS)

CPU MODULE 8 MB | DCP10 Y0338701M | ABB

In Stock Original New Unused The ABB DCP10 (Part Number: Y0338701M or P 37211-4-0338701) is a Central Processing Unit (CPU) Module for ABB's legacy Freelance 2000 Distributed Control System (DCS)

Digital Input Module | DDI 01 0369626M-EXC | ABB

In Stock Original New Unused The ABB DDI01 is a 16-channel digital input module specifically for the ABB Freelance 2000 distributed control system (DCS).

DIGITAL OUTPUT MODULE | DDO01 0369627MR | ABB

In Stock Original New Unused The ABB DDO01 0369627MR is a digital output module manufactured for integration within the ABB Freelance 2000 distributed control system, originally developed by Hartmann & Braun.

Analog Input Module | DAI01 P37131-4-0369628 | ABB

We found other products you might like!

What Our Clients Say?

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry