KJ3002X1-BA1 12P06801X122
8-Channel 4-20 mA HART Analog Input Card · exact model-specific sourcing identity
Order note: Confirm the complete printed identifier, carrier, terminal hardware and HART field wiring before replacement.
ItemNO:
KJ3002X1-BA1 12P0680Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
info@amikon.cnWhatsapp/Mob:
+86 180302353138-Channel 4-20 mA HART Analog Input Card · DeltaV M-series Traditional I/O
Emerson KJ3002X1-BA1 12P06801X122 is an 8-channel 4-20 mA HART analog input card for DeltaV M-series Traditional I/O systems.
The card supports 2-wire inputs, uses 12 V DC LocalBus power at 150 mA and requires 24 V DC field power at 300 mA.
It is primarily relevant to exact maintenance and replacement projects where the complete printed identifier, A1 terminal keying, carrier, terminal hardware and HART field wiring must be confirmed.
| Manufacturer | Emerson |
|---|---|
| Full model | KJ3002X1-BA1 12P06801X122 |
| Product family | DeltaV M-series Traditional I/O |
| Product type | 8-Channel 4-20 mA HART Analog Input Card |
| Channels | 8 analog inputs |
| Signal | 4-20 mA with HART |
| Input wiring | 2-wire |
| LocalBus power | 12 VDC at 150 mA |
| Bussed field power | 24 VDC at 300 mA |
| Terminal key | A1 |
Confirm the complete installed configuration, carrier, terminal block and field wiring before replacement or migration.
Match the complete KJ3002X1-BA1 12P06801X122 nameplate, installed family, carrier or monitor location, and documented system revision before replacement.
Confirm the applicable interface, terminal hardware, field wiring and the Signal requirement shown in the manufacturer documentation.
Use the manufacturer installation procedure, isolate field energy where required, and verify wiring before the module or sensor is connected.
Do not assume interchangeability from appearance alone. Compare the full model, 12P06801X122 identifier, revision and installed hardware.
Record channel or signal checks, alarm or loop response where applicable, and the final configuration after installation.
Provide the complete model, clear nameplate photographs, quantity, installed system, terminal or converter details, and destination.
Qualified personnel must follow the manufacturer instructions and the site's approved maintenance procedure. Similar model numbers are not evidence of interchangeability.
Send the complete KJ3002X1-BA1 12P06801X122 model, quantity, destination and nameplate photo. We will verify identification details before confirming availability and lead time.
Technical information must be verified against the exact KJ3002X1-BA1 12P06801X122, installed system and official manufacturer documentation.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming DistrictDisclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported