8C-TAOXA1 51307135-175
Series 8 Analog Output IOTA · Analog Output I/O Termination Assembly for Honeywell Experion Series 8 I/O System
Lifecycle note: Use the unit nameplate and current Honeywell documentation as final references before approving a replacement.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales17@amikon.cnWhatsapp/Mob:
+86 15359408275Series 8 Analog Output IOTA · Honeywell Experion Series 8 I/O System
Honeywell 8C-TAOXA1 51307135-175 is a series 8 analog output iota for the Experion Series 8 I/O architecture. It provides the field-termination and IOM-mounting interface used to deliver analog control signals from a compatible Series C output module to valves, positioners and other current-loop final elements.
The Series C analog output function associated with Honeywell 8C-TAOXA1 51307135-175 is documented for 16 channels and 4-20 mA current outputs. The paired IOM supplies conversion, readback and diagnostics, while the IOTA carries field wiring, power distribution and the selected redundancy arrangement.
The A1 order-code hardware must be checked against the exact installed assembly because the public family specification does not enumerate every coated order-code variant. Honeywell specifies modular IOTAs with detachable field terminals, direct IOM mounting and carrier-bus power. This architecture supports maintenance without transferring permanent field wiring to a separate electronics chassis.
Before replacing Honeywell 8C-TAOXA1 51307135-175, verify the complete nameplate, non-redundant a1 hardware arrangement, verify exact a1 physical assembly, paired Exact approved Series 8 analog output IOM, HART requirement, load resistance, polarity, terminal map and Experion control strategy. Do not exchange TAOX variants solely by appearance.
| Manufacturer | Honeywell |
|---|---|
| Complete model | 8C-TAOXA1 51307135-175 |
| System family | Honeywell Experion Series 8 I/O System |
| Product type | Analog Output I/O Termination Assembly |
| IOTA configuration | Non-redundant A1 hardware arrangement |
| Nominal IOTA size | Verify exact A1 physical assembly |
| Associated channels | 16 channels |
| Associated signal | 4-20 mA current output |
| Compatible IOM check | Exact approved Series 8 analog output IOM |
| Carrier power | 24 VDC Series 8 IOTA carrier bus |
| Output ripple | Less than 100 mV peak-to-peak across 250 ohms |
| Output current linearity | ±0.05% of full scale nominal |
Use the installed-unit nameplate, current Honeywell documentation and approved cabinet engineering records as the final references.
Honeywell 8C-TAOXA1 51307135-175 is an analog output I/O termination assembly for the Experion Series 8 architecture. It terminates field wiring and supports the compatible plug-in analog output module used for current-loop control signals.
Honeywell 8C-TAOXA1 51307135-175 is associated with the Series C 4-20 mA analog output function. Verify the field device load, loop power, polarity, grounding and the exact paired output IOM before commissioning any channel.
Honeywell 8C-TAOXA1 51307135-175 belongs to a Series C analog output arrangement documented for 16 channels. Confirm the installed IOM, terminal assignment and cabinet design because the IOTA itself is the field-termination and module-mounting assembly.
Honeywell 8C-TAOXA1 51307135-175 must use the analog output IOM approved for its exact IOTA and redundancy configuration. Check HART capability, IOM model, firmware, Experion release and control strategy before approving a replacement.
Honeywell 8C-TAOXA1 51307135-175 receives system power through the Series 8 IOTA carrier and distributes the required field connections through its terminals. Confirm the 24 VDC bus, external field-power design, grounding and protective devices before energizing.
Install Honeywell 8C-TAOXA1 51307135-175 only after isolating field and system power. Compare the complete part number, physical length, redundancy layout, terminal blocks, connector keys, carrier position and grounding with the removed assembly and Honeywell drawings.
Commission Honeywell 8C-TAOXA1 51307135-175 by verifying every terminal against the loop or I/O schedule, checking polarity and field power, confirming the correct IOM and redundancy state, and proving channel indication or output response from Experion.
No direct substitution should be assumed. Honeywell 8C-TAOXA1 51307135-175 must match the complete model, part number, I/O function, physical size, redundancy arrangement, terminal mapping, compatible IOM and installed Experion configuration.
Honeywell Experion Series-C I/O Specification EP03-490-520 provides the family architecture, IOTA sizing and technical data relevant to Honeywell 8C-TAOXA1 51307135-175. Use it with the exact nameplate, cabinet drawings and current system documentation.
Send the complete Honeywell model, part number, revision, quantity, destination and nameplate photo. We will verify identification details before confirming availability and lead time.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming District
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported
About Us
Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.
Where to Find Us
32D Guomao Building, No.388, Hubin South Road, Siming District
+86 18150117685
sales1@amikon.cn
Follow Us
