Products

Home

Products

New Products

Products

  • 4454-156 Bently Nevada Legacy Armored Extension Cable
    Bently Nevada · 3000 and 7000 Series Proximity Transducer Systems 4454-156 4454-156 is a legacy Bently Nevada armored extension cable for 3000 and 7000 Series proximity transducer systems. In the manufacturer ordering literature, the 4454 base identifies an extension cable with armor and the 156 code identifies 156 in (13 ft, approximately 3.96 m). 4454-156 is not identified by that manufacturer source as a thermocouple heat sensor; the existing inventory title should therefore be corrected before publication. Component Legacy proximity-system extension cable Length 156 in (13 ft; 3.96 m approximate) Armor With armor Identity correction OEM literature identifies a proximity extension cable, not a thermocouple sensor Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact legacy component and installed chain Application Fit Legacy machinery monitoring installation Exact component identification and replacement Matched wiring or transducer-chain integration Verify Before Order Confirm the complete 4454-156 nameplate Confirm legacy option, length and component role Confirm current availability, compatibility and approval evidence Scope note: Cable and probe lengths are critical to the selected legacy Proximitor system length; 4454-156 must not be treated as a universal extension cable or as a complete transducer system.
    Read More +
  • 40180-02 Bently Nevada 3300 XL Connector Protectors
    Bently Nevada · 3300 XL 8 mm Proximity Transducer Accessories 40180-02 40180-02 is a Bently Nevada Connector protectors for 3300 XL 8 mm probes and extension cables, packaged as 10 pairs. 40180-02 provides environmental protection at compatible connector interfaces. 40180-02 is an accessory only, not a complete proximity transducer system, and it does not include a probe, extension cable, Proximitor Sensor or monitor. Accessory Connector protector package OEM package 10 pairs of protectors Compatibility 3300 XL 8 mm probe and extension-cable connectors Purpose Environmental protection of compatible connector interfaces Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact OEM component and installed configuration Application Fit Connector protection and installation 3300 XL proximity-chain maintenance Exact accessory replacement planning Verify Before Order Confirm the complete 40180-02 identification Confirm the exact component role and listed option Confirm companion equipment and installed-system requirements Scope note: 40180-02 does not replace or include any electrical transducer-chain component.
    Read More +
  • 40113-02 Bently Nevada 3300 XL Connector Protector Kit
    Bently Nevada · 3300 XL 8 mm Proximity Transducer Accessories 40113-02 40113-02 is a Bently Nevada Connector Protector Kit for 3300 XL 8 mm probes and extension cables, including connector protectors and installation tools. 40113-02 provides environmental protection at compatible connector interfaces. 40113-02 is an accessory only, not a complete proximity transducer system, and it does not include a probe, extension cable, Proximitor Sensor or monitor. Accessory Connector Protector Kit OEM package Protectors and installation tools Compatibility 3300 XL 8 mm probe and extension-cable connectors Purpose Environmental protection of compatible connector interfaces Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact OEM component and installed configuration Application Fit Connector protection and installation 3300 XL proximity-chain maintenance Exact accessory replacement planning Verify Before Order Confirm the complete 40113-02 identification Confirm the exact component role and listed option Confirm companion equipment and installed-system requirements Scope note: 40113-02 does not replace or include any electrical transducer-chain component.
    Hot Tags : 40113-02
    Read More +
  • 350500-00-00-00-11-00 Bently Nevada Charge Amplifier
    Bently Nevada · 350500 DPCA 350500-00-00-00-11-00 350500-00-00-00-11-00 is a Bently Nevada DPCA configured for 16 pC/psi input, high filter, 100 mV/psi output, DIN mounting, MIL connector and no approval option. Type dynamic pressure charge amplifier Family 350500 DPCA Scope Component Source OEM Verified ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 350500-00-00-00-11-00 against the installed machinery system Application Fit Maintenance of the documented 350500 DPCA installation Like-for-like replacement using the complete part number Machinery monitoring applications supported by the cited OEM document Verify Before Order Complete part number 350500-00-00-00-11-00 Mounting, power, signal and interface compatibility Approval, rack, cable and companion-module requirements Scope note: 350500-00-00-00-11-00 identifies High-temperature pressure sensor, low-noise cable and monitor required
    Read More +
  • 184826-01 Bently Nevada 3500/94M VGA Display Main Module
    Bently Nevada · 3500/94M VGA Display 184826-01 184826-01 is the Bently Nevada 3500/94M main module identified in Baker Hughes datasheet 122M3217 Rev. N. 184826-01 occupies one full-height front rack slot and is the front VGA module in a configured 3500/94M display path. 184826-01 is not a rear I/O module and does not include the matched I/O module, touch display, display cables, 3500/22 TDI, rack, or complete 3500/94M system. Official identity 3500/94M Main module Rack position 1 full-height front slot Dimensions 241.3 x 24.4 x 241.8 mm Weight 0.73 kg (1.6 lb) Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the front module role and matched display path Application Fit Front VGA module for a configured 3500/94M display path 3500 rack display-system maintenance Exact-spare replacement by official part number Verify Before Order Confirm the exact full part number Confirm front main-module versus rear I/O role Confirm display, cables, TDI, rack and approval configuration Scope note: 184826-01 is the front main module. 184826-01 is not a rear I/O module, a touch display, a display router, a KVM extender, or a complete 3500/94M system.
    Read More +
  • 145988-01 Bently Nevada 3500/94 Main module
    Bently Nevada · 3500/94 VGA Display 145988-01 145988-01 is the exact Bently Nevada 3500/94 Main module identified in the cited manufacturer document. 145988-01 forms the rack-side 3500/94 VGA module that communicates system data to the matched rear I/O module and separate touch display. Claims for 145988-01 are limited to the listed component; rear VGA I/O module, touch display, display power supply, VGA/serial cables, rack and configuration are separate. Exact component 3500/94 Main module System family 3500/94 VGA Display Position or form one full-height front rack slot Lifecycle Exact OEM identity verified; current availability not claimed Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact 3500/94 VGA Display component configuration Application Fit Exact replacement of the documented 3500/94 Main module Service work within a compatible 3500/94 VGA Display rack configuration Lifecycle or migration review using the cited manufacturer source Verify Before Order Full 145988-01 label and hardware revision Matching front/rear module, rack slot, wiring and software configuration Lifecycle, replacement restrictions and current approval documentation Scope note: 145988-01 claims cover only the exact 3500/94 Main module identity and the component role explicitly supported by the cited manufacturer source. Complete-system operation around 145988-01 depends on matching modules, rack and software revisions, field devices, wiring, configuration and applicable approval documents.
    Read More +
  • VGA Display | 3500/94 | Bently Nevada
    In Stock Original New Unused Bently Nevada 3500/94 VGA Display
    Read More +
  • 135799-02 Bently Nevada 3500/93 Display Interface Module
    Bently Nevada · 3500/93 135799-02 Bently Nevada 3500/93 135799-02 is the front Display Interface Module specified for 3500/93 back-lighted system-display mounting options A05 through A08. 3500/93 135799-02 collects rack data and communicates with a separately selected 3500/93 display unit through the applicable display connection. 3500/93 135799-02 is not the LCD display unit, not the 135813-01 rear Display Interface I/O Module, and not a complete 3500/93 display system. Type 3500/93 Display Interface Module for A05 through A08 mounting options Family 3500/93 Scope Module Source OEM Verified ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 135799-02 against the installed 3500 rack configuration Application Fit Maintenance of the documented 3500 rack installation Like-for-like replacement using the exact spare part number Machinery monitoring service within the cited module family Verify Before Order Exact part number 135799-02 Front or rear module role and rack-slot compatibility Power, firmware, I/O, wiring and companion-module requirements Scope note: 135799-02 identifies 3500/93 Display Interface Module for A05 through A08 mounting options. Do not show LCD resolution, display-unit dimensions, or display-unit power as specifications of 135799-02.
    Read More +
  • 136180-01 Bently Nevada 3500/92 Communication Gateway
    Bently Nevada · 3500/92 136180-01 Bently Nevada 3500/92 136180-01 is the front Communication Gateway module for a 3500 rack. With a separately selected 3500/92 rear I/O module, 3500/92 136180-01 transfers rack values, module states, and alarm status to process-control or automation systems using the supported Ethernet or serial communication path. 3500/92 136180-01 is not a rear RS232/RS422/RS485 I/O module and is not a complete rack. Type 3500/92 Communication Gateway front module Family 3500/92 Scope Module Source OEM Verified ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 136180-01 against the installed 3500 rack configuration Application Fit Maintenance of the documented 3500 rack installation Like-for-like replacement using the exact spare part number Machinery monitoring service within the cited module family Verify Before Order Exact part number 136180-01 Front or rear module role and rack-slot compatibility Power, firmware, I/O, wiring and companion-module requirements Scope note: 136180-01 identifies 3500/92 Communication Gateway front module. Do not infer a rear I/O interface type or agency approval from P/N 136180-01 alone.
    Read More +
  • Communication Gateway Module | 3500/90 | Bently Nevada
    In Stock Original New Unused Bently Nevada 3500/90 Communication Gateway Module
    Read More +
  • 140734-07 Bently Nevada 3500/77M Cylinder Pressure Monitor
    Bently Nevada · 3500/77M Recip Cylinder Pressure Monitor 140734-07 140734-07 is the exact Bently Nevada 3500/77M Cylinder Pressure Monitor identified in the cited manufacturer document. 140734-07 accepts compatible pressure-transducer inputs for reciprocating-compressor cylinder-pressure measurements and configured alarm comparison. Claims for 140734-07 are limited to the listed component; rear I/O module, pressure transducers, event wheel, rack, wiring, mechanical configuration and approval documents are separate. Exact component 3500/77M Cylinder Pressure Monitor System family 3500/77M Recip Cylinder Pressure Monitor Position or form one full-height front rack slot Lifecycle Exact OEM identity verified; current availability not claimed Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact 3500/77M Recip Cylinder Pressure Monitor component configuration Application Fit Exact replacement of the documented 3500/77M Cylinder Pressure Monitor Service work within a compatible 3500/77M Recip Cylinder Pressure Monitor rack configuration Lifecycle or migration review using the cited manufacturer source Verify Before Order Full 140734-07 label and hardware revision Matching front/rear module, rack slot, wiring and software configuration Lifecycle, replacement restrictions and current approval documentation Scope note: 140734-07 claims cover only the exact 3500/77M Cylinder Pressure Monitor identity and the component role explicitly supported by the cited manufacturer source. Complete-system operation around 140734-07 depends on matching modules, rack and software revisions, field devices, wiring, configuration and applicable approval documents.
    Read More +
  • 3500/72M Bently Nevada Recip Rod Position Monitor Family
    Bently Nevada · 3500/72M Recip Rod Position Monitor 3500/72M 3500/72M identifies the Bently Nevada four-channel Recip Rod Position Monitor model family. 3500/72M accepts one to four proximity-probe signals and conditions them for rod-position, rod-drop, and hyper-compressor measurements while comparing configured values with alarm setpoints. Baker Hughes states that the 3500/72M monitor meets API 618 requirements for reciprocating compressors. This record does not select the AA I/O-module option or BB approval option in 3500/72M-AA-BB and does not assign an exact main-module or I/O spare part number. Official identity 3500/72M Recip Rod Position Monitor model family Channels 4 Accepted inputs 1 to 4 proximity-probe signals Ordering status AA I/O and BB approval options are not specified Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact ordering variant before selection Application Fit Bently Nevada 3500 rack architecture Model-family identification and planning Configured monitoring or relay application Verify Before Order Confirm the displayed model 3500/72M Confirm the full order code or exact spare number Confirm selected I/O, approval option and installed configuration Scope note: 3500/72M does not select an I/O or output option, approval suffix, exact front-module spare, or exact rear-module spare. Content must remain at model/family level until an exact order code or nameplate is available.
    Read More +
  • 3500/70M 176449-09 Bently Nevada Recip Impulse Velocity Monitor
    Bently Nevada · 3500/70M Recip Monitor 3500/70M 176449-09 3500/70M 176449-09 is the OEM-listed four-channel Bently Nevada reciprocating impulse/velocity monitor for crankcase and crosshead vibration. Type recip impulse velocity monitor Family 3500/70M Recip Monitor Scope Component Source OEM Verified ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 3500/70M 176449-09 against the installed machinery system Application Fit Maintenance of the documented 3500/70M Recip Monitor installation Like-for-like replacement using the complete part number Machinery monitoring applications supported by the cited OEM document Verify Before Order Complete part number 3500/70M 176449-09 Mounting, power, signal and interface compatibility Approval, rack, cable and companion-module requirements Scope note: 3500/70M 176449-09 identifies Matching I/O, transducers, configuration and firmware required
    Read More +
  • 3500/70M Bently Nevada Recip Impulse Velocity Monitor Family
    Bently Nevada · 3500/70M Recip Impulse Velocity Monitor 3500/70M 3500/70M identifies the Bently Nevada four-channel Recip Impulse Velocity Monitor model family. 3500/70M is used in reciprocating-compressor solutions to monitor crankcase and crosshead vibration from compatible seismic inputs. Configurable functions include impulse acceleration, Acceleration 2, reciprocating velocity, and low-frequency reciprocating velocity. This record does not select the AA I/O-module option or BB approval option in 3500/70M-AA-BB and does not assign an exact main-module or I/O spare part number. Official identity 3500/70M Recip Impulse Velocity Monitor model family Channels 4 Application Reciprocating-compressor crankcase and crosshead vibration Ordering status AA I/O and BB approval options are not specified Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact ordering variant before selection Application Fit Bently Nevada 3500 rack architecture Model-family identification and planning Configured monitoring or relay application Verify Before Order Confirm the displayed model 3500/70M Confirm the full order code or exact spare number Confirm selected I/O, approval option and installed configuration Scope note: 3500/70M does not select an I/O or output option, approval suffix, exact front-module spare, or exact rear-module spare. Content must remain at model/family level until an exact order code or nameplate is available.
    Read More +
  • 3500/64M 176449-05 Bently Nevada Dynamic Pressure Monitor
    Bently Nevada · 3500/64M Dynamic Pressure Monitor 3500/64M 176449-05 3500/64M 176449-05 is the OEM-listed four-channel Bently Nevada dynamic pressure monitor for bandpass combustion-pressure monitoring and alarm generation. Type 3500/64M dynamic pressure monitor Family 3500/64M Dynamic Pressure Monitor Scope Component Source OEM Verified ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 3500/64M 176449-05 against the installed machinery system Application Fit Maintenance of the documented 3500/64M Dynamic Pressure Monitor installation Like-for-like replacement using the complete part number Machinery monitoring applications supported by the cited OEM document Verify Before Order Complete part number 3500/64M 176449-05 Mounting, power, signal and interface compatibility Approval, rack, cable and companion-module requirements Scope note: 3500/64M 176449-05 identifies Matching rear I/O, pressure sensor/charge amplifier and configuration required
    Read More +
  • 3500/64M Bently Nevada Dynamic Pressure Monitor Family
    Bently Nevada · 3500/64M Dynamic Pressure Monitor 3500/64M 3500/64M identifies the Bently Nevada single-slot, four-channel Dynamic Pressure Monitor model family. 3500/64M accepts one to four compatible high-temperature pressure-transducer signals and provides one bandpass dynamic-pressure measured variable per channel, configured alarm processing, filtering, and individual recorder outputs. The official order-code root is 3500/64-AA-BB. This record does not select the AA I/O-module option or BB approval option and does not assign main-monitor spare part number 176449-05 or any other exact SKU. Official identity 3500/64M Dynamic Pressure Monitor model family Channels 4 Measured variable Bandpass dynamic pressure Ordering status AA I/O and BB approval options are not specified Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact ordering variant before selection Application Fit Bently Nevada 3500 rack architecture Model-family identification and planning Configured monitoring or relay application Verify Before Order Confirm the displayed model 3500/64M Confirm the full order code or exact spare number Confirm selected I/O, approval option and installed configuration Scope note: 3500/64M does not select an I/O or output option, approval suffix, exact front-module spare, or exact rear-module spare. Content must remain at model/family level until an exact order code or nameplate is available.
    Read More +
  • 285694-02 Bently Nevada 3500/61E 6 Channel Temperature Monitor, Non-Isolated RTD
    Bently Nevada · 3500/61E Temperature Monitor 285694-02 285694-02 is the exact Bently Nevada 3500/61E 6 Channel Temperature Monitor, Non-Isolated RTD identified in the cited manufacturer document. 285694-02 accepts up to six RTD signals in the documented non-isolated RTD configuration and compares conditioned values with configured alarm setpoints. Claims for 285694-02 are limited to the listed component; temperature I/O module, legacy 3300 SIM/SIRM, RTDs, rack, relay module, wiring and configuration are separate. Exact component 3500/61E 6 Channel Temperature Monitor, Non-Isolated RTD System family 3500/61E Temperature Monitor Position or form front monitor module; one full-height front slot in an ENCORE system rack Lifecycle Exact OEM identity verified; current availability not claimed Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact 3500/61E Temperature Monitor component configuration Application Fit Exact replacement of the documented 3500/61E 6 Channel Temperature Monitor, Non-Isolated RTD Service work within a compatible 3500/61E Temperature Monitor rack configuration Lifecycle or migration review using the cited manufacturer source Verify Before Order Full 285694-02 label and hardware revision Matching front/rear module, rack slot, wiring and software configuration Lifecycle, replacement restrictions and current approval documentation Scope note: 285694-02 claims cover only the exact 3500/61E 6 Channel Temperature Monitor, Non-Isolated RTD identity and the component role explicitly supported by the cited manufacturer source. Complete-system operation around 285694-02 depends on matching modules, rack and software revisions, field devices, wiring, configuration and applicable approval documents.
    Read More +
  • 136711-02 Bently Nevada 3500/61 Temperature I/O Module
    Bently Nevada · 3500/61 136711-02 136711-02 is the Bently Nevada 3500/61 rear RTD/TC temperature-input I/O module with internal barriers and internal terminations. Baker Hughes identifies 136711-02 as not isolated. Although a configured 3500/61 provides recorder outputs, 136711-02 is not the recorder-output termination block, the 163179-02 front monitor, or a complete rack. Type Temperature I/O Module Family 3500/61 Rack Role Rear I/O Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 136711-02 against the installed 3500/61 rack assembly Application Fit Temperature monitoring in a compatible 3500 rack RTD or thermocouple input processing in the documented assembly Like-for-like maintenance using the exact part number Verify Before Order Exact part number 136711-02 Front/rear slot role and companion module Sensor type, termination, barriers and rack configuration Scope note: 136711-02 identifies the rear RTD/TC temperature-input I/O module with internal barriers and internal terminations; not isolated. 136711-02 is not a complete 3500 rack.
    Read More +
  • 3500/60 Bently Nevada Temperature Monitor Family
    Bently Nevada · 3500/60 Temperature Monitor 3500/60 3500/60 identifies the Bently Nevada six-channel Temperature Monitor model family without recorder outputs. 3500/60 accepts one to six RTD or thermocouple signals through the selected compatible I/O module, conditions the inputs, and compares configured temperature values with alarm setpoints. Baker Hughes states that 3500/60 and 3500/61 provide the same monitoring functionality except that 3500/61 provides six recorder outputs and 3500/60 does not. This record does not select the AA I/O option or BB approval option in 3500/60-AA-BB and does not assign an exact front-monitor or rear-I/O spare part number. Official identity 3500/60 Temperature Monitor without recorder outputs Channels 6 Accepted inputs 1 to 6 RTD or thermocouple signals Recorder outputs None for 3500/60 Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact model, hardware variant and installed configuration Application Fit Machinery monitoring architecture Official model-family identification Configured system planning and replacement review Verify Before Order Confirm the displayed model 3500/60 Confirm the full part number or hardware revision Confirm sensors, I/O, options and approval documentation Scope note: 3500/60 does not select an exact part number, I/O or output option, approval suffix, sensor package, or complete supplied configuration. No suffix may be added to 3500/60 without exact nameplate or ordering evidence.
    Read More +
  • Electronic Overspeed Detection System | 3500/53M 286566-01 | Bently Nevada
    In Stock Original New Unused Bently Nevada 3500/53M 286566-01 Electronic Overspeed Detection System
    Read More +
1 ... 197 198 199 200 201 ... 213
A total of213pages

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry

Email us : sales1@amikon.cn

Reply within one working day

Visit us

32D Guomao Building, No.388, Hubin South Road, Siming District

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Contact Us
Location 32D Guomao Building, No.388, Hubin South Road, Siming District

Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.



Copyright @2026 SalesPlc Limited. Sitemap / Blog / XML / Terms And Conditions / Privacy Policy Network Supported

vk YouTube Tiktok Pinterest Reddit teitter linkedin. facebook

leave a message

leave a message
Feel free to communicate any order concerns – we provide quality products and best service.
submit

Home

Products

whatsApp

Contact Us

About Us

Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.

Where to Find Us

32D Guomao Building, No.388, Hubin South Road, Siming District +86 18150117685 sales1@amikon.cn

Follow Us