Sample Gas Feed Unit | SCC-F 23212-0-110310 | ABB

Technical Specifications

The ABB SCC-F 23212-0-110310 supports two independent sample gas paths with a maximum sample gas flow of 100 L/h for each gas path, while the bypass flow can reach 200 L/h. The unit is for sample gas inlet pressures of 70 to 105 kPa and accepts a sample gas inlet temperature range of +10°C to +50°C. For reliable operation, the sample gas dew point should remain at least 5°C below the lowest ambient temperature anywhere in the sample gas feed path.

Troubleshooting & Commissioning Checklist

Auxiliary Electrical Energization: Switch on the AC power line. Verify that the power LED illuminates and that the internal sample gas pump runs smoothly without excessive grinding noise or erratic vibration.
Alarm Relay Verification: Check the digital status contacts on the back terminal block. Before sample gases warm up or flow stabilizing criteria are met, ensure the "Malgas" (Fault/Maintenance) alarm signal communicates correctly with the central DCS or AO2000 analyzer system.
Introduce Clean Purge/Span Gas: Inject clean, dry nitrogen or air through the sampling lines first to verify the pathway.

Field Engineering Considerations

Dew Point Buffer: The inlet gas dew point must be at least 5 °C lower than the lowest ambient temperature anywhere along the line.
Pre-Cooling: If the sample gas contains heavy moisture, an upstream ABB SCC-C Sample Gas Cooler or condensate trap is mandatory to stop liquid dropouts.
Pressure Bounds: Standard operational sample gas pressure must be maintained between 70 to 105 kPa.
Bypass Management: While the active analytical paths max out at 100 l/h each, the integrated bypass gas path can handle up to 200 l/h.

Technical FAQ

Q: What will happen if hot, humid process gas bypasses the cooler and enters the SCC-F 23212-0-110310 directly?
A: If uncooled gas enters the SCC-F 23212-0-110310, it will drop below its acid dew point inside the unheated module. This triggers immediate liquid acid condensation within the rotameters and valves, which will ruin the feed mechanism and inevitably flood and destroy downstream infrared or ultraviolet analyzer cells.

Q: Why is a negative-pressure leak test so critical for the SCC-F 23212-0-110310 side of the sampling loop?
A: Because the feed pump pulls sample gas from the stack under suction (negative pressure), any microscopic loose fitting behind the front panel of the SCC-F 23212-0-110310 will draw ambient air into the gas stream rather than leaking gas out. This ambient oxygen (O₂) dilutes the actual sample, resulting in false low readings that can ruin environmental compliance reporting.

Q: What is the recommended preventative maintenance schedule for the peristaltic drainage components inside the SCC-F 23212-0-110310?
A: The internal peristaltic pump tubing undergoes constant mechanical compressing and fatigue. To prevent tube flattening, loss of suction, or pinhole ruptures that could flood the sample box, the hoses must be treated as a wear item and replaced every 6 months.

Q: Do you supply brand-new, original parts or second-hand refurbished items?

A: Our stock consists of Original New items; all products undergo quality inspection to ensure they are fully functional.

Q: What guarantees are included with the shipment?
A: All items in stock are tested by engineers, packed in professional ESD packaging, and shipped via express logistics with a global delivery time of 24–48 hours.

Q: How long does global shipping take?
A: Stock items are typically dispatched within 24 hours. Shipments are sent via DHL or FedEx Express, taking approximately 3–5 days to reach Asia, 4–6 days to Europe and the Middle East, and usually arriving within a week in major industrial regions worldwide.

Q: If the model I need is not listed on the website, can I request a quote?
A: Yes. We hold over 200,000 SKUs of industrial spare parts in stock, and many long-tail models are not listed in full. You can send us an RFQ (Request for Quote) directly, and we will provide wholesale pricing promptly.

You May Also Like: