330173-00-05-10-12-00 Bently Nevada 5 mm Proximity Probe
330173-00-05-10-12-00
330173-00-05-10-12-00 is a historical Bently Nevada 3300 5 mm proximity probe with an M8x1 thread, no armor, 0 mm unthreaded length, 50 mm overall case length, a 1.0 m integral lead, and FluidLoc cable with ClickLoc connector; no connector protector. 330173-00-05-10-12-00 is the probe component only. The final 00 approval field is retained for historical identification, but current Baker Hughes guide 108M1756 Rev. AV does not list 00 as available for new 330173 orders. Match 330173-00-05-10-12-00 with the required extension cable and Proximitor Sensor.
Scope note: 330173-00-05-10-12-00 is the probe only and does not include an extension cable or Proximitor Sensor. Published range, sensitivity and frequency response belong to a correctly matched complete 3300 5 mm system.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales1@amikon.cnWhatsapp/Mob:
+86 18150117685Officially decoded historical probe configuration with current-orderability and complete-system boundaries clearly stated.
330173-00-05-10-12-00 decodes in Baker Hughes datasheet 172036 Rev. T as M8x1, without armor, 0 mm unthreaded length, 50 mm overall case length, a 1.0 m lead, and FluidLoc cable with ClickLoc connector; no connector protector.
330173-00-05-10-12-00 retains the historical final 00 field for identification. Current Baker Hughes guide 108M1756 Rev. AV marks 00 unavailable for new 330173 orders, so replacement and certification must be checked from the installed nameplate and current ordering guide.
330173-00-05-10-12-00 is the probe only and does not include an extension cable or Proximitor Sensor. Published range, sensitivity and frequency response belong to a correctly matched complete 3300 5 mm system.
| Model / part number | 330173-00-05-10-12-00 |
|---|---|
| Manufacturer | Bently Nevada, a Baker Hughes business |
| Component type | Historical 3300 5 mm proximity probe component |
| Thread | M8x1 |
| Armor | None |
| Probe tip | 5.2 mm diameter; PPS |
| Case | AISI 303/304 stainless steel |
| Unthreaded length | 0 mm |
| Overall case length | 50 mm |
| Integral lead | 1.0 m |
| Cable / connector | FluidLoc cable with ClickLoc connector; no connector protector |
| Probe cable | 75 ohm triaxial, FEP insulated; 2.8 mm maximum outside diameter |
| Minimum bend radius | 25.4 mm |
| Operating / storage temperature | -35 deg C to +177 deg C; exposure below -34 deg C may prematurely damage the pressure seal |
| Tensile strength | 222 N case-to-lead and 222 N lead-to-extension-connector |
| Recommended / maximum case torque | 5.1 N m / 7.3 N m |
| Maximum thread engagement | 12 mm |
| Nominal probe dc resistance | 7.59 +/- 0.50 ohm at 1.0 m |
| Historical approval field | 00; retained for identification, not currently available for new 330173 orders in 108M1756 Rev. AV |
| Official source | Baker Hughes 172036 Rev. T and 108M1756 Rev. AV |
| Complete-system System composition | A complete matched 3300 5 mm system containing 330173-00-05-10-12-00 uses the probe, the required 3300 XL extension cable, and a compatible 3300 XL Proximitor Sensor. |
| Complete-system Linear range | For a complete matched 3300 5 mm system containing 330173-00-05-10-12-00: 2 mm (80 mil), not a probe-alone rating. |
| Complete-system Incremental scale factor | For a complete matched 3300 5 mm system containing 330173-00-05-10-12-00: nominal 7.87 V/mm (200 mV/mil), not a probe-alone rating. |
| Complete-system Frequency response | For a complete matched 3300 5 mm system containing 330173-00-05-10-12-00: 0 to 10 kHz under the datasheet conditions, not a probe-alone rating. |
Compatibility statements are limited to the cited manufacturer documentation. Availability, condition and substitution must be confirmed separately.
330173-00-05-10-12-00 is a historical Bently Nevada 3300 5 mm M8x1 proximity-probe configuration and is one component of a matched transducer system.
330173-00-05-10-12-00 uses an M8x1 case thread, no armor, and the official 5.2 mm PPS probe tip.
330173-00-05-10-12-00 specifies 0 mm unthreaded length and 50 mm overall case length.
330173-00-05-10-12-00 specifies a 1.0 m integral lead with FluidLoc cable with ClickLoc connector; no connector protector.
330173-00-05-10-12-00 carries the historical 00 no-approval order field; the current 108M1756 Rev. AV guide marks 00 unavailable for new 330173 orders, so 330173-00-05-10-12-00 must not be presented as a currently orderable factory configuration.
A complete system around 330173-00-05-10-12-00 requires the correctly length-matched 3300 XL extension cable when applicable and a compatible 3300 XL Proximitor Sensor.
No. 330173-00-05-10-12-00 is the probe component; the 2 mm range and 7.87 V/mm scale factor apply only to a correctly matched complete 3300 5 mm system containing 330173-00-05-10-12-00.
330173-00-05-10-12-00 uses the official 3300 5 mm probe range of -35 deg C to +177 deg C, a 25.4 mm minimum cable bend radius, and the manufacturer warning that exposure below -34 deg C may prematurely damage the pressure seal.
Send the complete part number, installed-system details, quantity, destination and clear label photos. Availability and condition will be confirmed before quotation.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming District
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported
About Us
Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.
Where to Find Us
32D Guomao Building, No.388, Hubin South Road, Siming District
+86 18150117685
sales1@amikon.cn
Follow Us
