Home Siemens

500-033260 Siemens DPU Device Programmer Test Unit

500-033260 Siemens DPU Device Programmer Test Unit

Siemens · Siemens Fire Safety Device Programming Units

500-033260
500-033260 is Siemens model DPU, a compact portable device programmer and test unit for FireFinder XLS and MSL devices. Siemens states that 500-033260 electronically programs and tests compatible detectors before installation through device microcomputer-chip non-volatile memory; it is an accessory, not a detector or control panel.

Type
DPU device programmer and test unit for FireFinder XLS and MSL devices
Family
Siemens Fire Safety Device Programming Units
Platform
Siemens FireFinder XLS and MSL device ecosystem
Scope
Component
Application & Order CheckVerify 500-033260 against the installed Siemens configuration
Application Fit
  • Maintenance of the documented Siemens Fire Safety Device Programming Units installation
  • Like-for-like replacement using the complete Siemens identifier
  • Migration planning with Siemens lifecycle and compatibility guidance
Verify Before Order
  • Complete order number 500-033260
  • Hardware revision, firmware and project compatibility
  • verify the target detector/device family, current instructions, battery/charger condition, firmware compatibility and the fire-system commissioning procedure.

Scope note: 500-033260 is a portable programming/test accessory, not a detector or fire alarm control panel. Only manufacturer-documented component data is stated on this page.

  • Product Condition

    Original New with One Year Warranty
  • Parts Available

    In Stock and Same Day Shipping
  • Delivery Mode

    Shipping via DHL Fedex or UPS etc
  • Email:

    sales1@amikon.cn
  • Whatsapp/Mob:

    +86 18150117685
Description
Technical Product Profile

Siemens 500-033260

DPU device programmer and test unit for FireFinder XLS and MSL devices

SiemensDPUSiemens Fire Safety Device Programming UnitsExact Order No.

Overview

500-033260 is Siemens model DPU, a compact portable device programmer and test unit for FireFinder XLS and MSL devices. Siemens states that 500-033260 electronically programs and tests compatible detectors before installation through device microcomputer-chip non-volatile memory; it is an accessory, not a detector or control panel.

Siemens documentation confirms product number DPU | 500-033260, product family Device Programming Units and Accessories, and use for programming and testing compatible detectors before installation for 500-033260. 500-033260 is the complete Siemens market-facing product number for model DPU.

Siemens Industry Mall lists 500-033260 as PM300 Active Product in the 2026 catalog view. Before installation, verify the target detector/device family, current instructions, battery/charger condition, firmware compatibility and the fire-system commissioning procedure.

Technical Data & PDF

Manufacturer Siemens
Model / product number DPU | 500-033260
Product type Device Programmer / Test Unit
Application FireFinder XLS and MSL devices
Function Electronically programs and tests compatible detectors before installation
Product family Device Programming Units and Accessories
Lifecycle PM300: Active Product in the referenced Industry Mall view
Net weight 4.321 lb (Industry Mall catalog value)
Country of origin United States of America
Ordering cross-check DPU 500-033260 - Device Programmer / Test Unit
Official source Siemens Industry Mall product 500-033260
Siemens Industry Mall product 500-033260Official ordering information, mechanical data, system-performance conditions and approval guidance
Open Official Datasheet
Siemens Device Accessories datasheet A6V10238855Additional Siemens official identity, application or lifecycle evidence for 500-033260
Open Official Guide
Confirm the exact component and installed system configurationSend the complete part numbers, required system length, quantity, destination and clear label photos.

Lifecycle & Compatibility

500-033260Siemens Fire Safety Device Programming Units component 500-033260
→
Verify ConfigurationVerify hardware, firmware, interfaces and project compatibility
→
Confirm CompatibilityConfirm exact order number and replacement or migration path
Like-for-like replacementMatch 500-033260 by complete Siemens order number, hardware revision, firmware, interfaces and wiring.
Migration planningTreat any substitute for 500-033260 as a system-level compatibility change and confirm the path with Siemens documentation.

Lifecycle and compatibility statements are limited to the cited Siemens documentation. Availability, condition and substitution must be confirmed separately.

Product FAQ

What is 500-033260?

500-033260 is a Siemens DPU device programmer and test unit for FireFinder XLS and MSL devices.

Which Siemens platform uses 500-033260?

500-033260 belongs to Siemens FireFinder XLS and MSL device ecosystem.

Is 500-033260 a complete control system?

No. 500-033260 is a portable programming/test accessory, not a detector or fire alarm control panel; 500-033260 should be evaluated as one component of the installed system.

What does Siemens documentation confirm for 500-033260?

For 500-033260, Siemens documentation confirms product number DPU | 500-033260, product family Device Programming Units and Accessories, and use for programming and testing compatible detectors before installation.

Does every identifier in 500-033260 matter?

Yes. 500-033260 is the complete Siemens market-facing product number for model DPU. The complete identifier 500-033260 should be matched to the unit label and project records.

Can 500-033260 be replaced by a unit with a different suffix?

Do not substitute 500-033260 solely because another unit shares the same base family. For 500-033260, verify the complete identifier, hardware revision, firmware, termination and application compatibility.

What should be checked before installing 500-033260?

Before installing 500-033260, verify the target detector/device family, current instructions, battery/charger condition, firmware compatibility and the fire-system commissioning procedure.

What lifecycle information applies to 500-033260?

Siemens Industry Mall lists 500-033260 as PM300 Active Product in the 2026 catalog view. For current service or replacement options for 500-033260, confirm directly with Siemens.

Request a Verified Quotation

Send the complete component and matching system part numbers, required electrical length, quantity, target material, approval requirements, destination and clear label photos. Availability and condition will be confirmed before quotation.

Official manufacturer source: Siemens Industry Mall product 500-033260. Siemens Device Accessories datasheet A6V10238855. Final suitability must be verified against the exact installed system, current certificates and official documentation.
✉Need this part?Quick Inquiry

We found other products you might like!

APOGEE Power Open Processor | 562-001 | Siemens
APOGEE Power Open Processor | 562-001 | Siemens
In Stock Original New Unused Siemens 562-001 APOGEE Power Open Processor
505-7003 Siemens SIMATIC TI505 Counter Encoder Module
505-7003 Siemens SIMATIC TI505 Counter Encoder Module
Siemens · SIMATIC TI505 505-7003 505-7003 is a Siemens SIMATIC TI505 high-speed counter encoder I/O module. Siemens specifies two channels with six counters total-one 24-bit counter and two 16-bit counters per channel-plus eight discrete outputs, quadrature and non-quadrature modes, and a 100 kHz default input filter. Type SIMATIC TI505 high-speed counter encoder module Family SIMATIC TI505 Platform Siemens SIMATIC TI505 PLC system Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 505-7003 against the installed Siemens configuration Application Fit Maintenance of the documented SIMATIC TI505 installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 505-7003 Hardware revision, firmware and project compatibility verify the TI505 base, supported CPU release, terminal block, field input level, external 24 VDC output supply, jumper configuration and ladder-logic configuration. Scope note: 505-7003 is a single-wide TI505 I/O module, not a PLC CPU or complete system. Only manufacturer-documented component data is stated on this page.
6AR1304-0CA00-0AA0 Siemens SICOMP SMP16-SFT304 Module
6AR1304-0CA00-0AA0 Siemens SICOMP SMP16-SFT304 Module
Siemens · SICOMP SMP16 6AR1304-0CA00-0AA0 6AR1304-0CA00-0AA0 is Siemens product designation SMP16-SFT304 for the SICOMP SMP16 industrial microcomputer platform. Siemens technical documentation identifies SMP16-SFT304 as a separate interrupt controller board on the SMP16 bus; it is a legacy, deleted product and must be matched by complete MLFB and system configuration. Type SICOMP SMP16-SFT304 interrupt controller board Family SICOMP SMP16 Platform Siemens SICOMP SMP16 industrial microcomputer Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 6AR1304-0CA00-0AA0 against the installed Siemens configuration Application Fit Maintenance of the documented SICOMP SMP16 installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 6AR1304-0CA00-0AA0 Hardware revision, firmware and project compatibility verify the SMP16 CPU generation, bus slot, interrupt routing, software support and the complete MLFB before installation. Scope note: 6AR1304-0CA00-0AA0 is an SMP16 bus interrupt controller board, not a standalone controller system. Only manufacturer-documented component data is stated on this page.
6AV3503-1DB10 Siemens SIMATIC OP3 Operator Panel
6AV3503-1DB10 Siemens SIMATIC OP3 Operator Panel
Siemens · SIMATIC HMI OP3 6AV3503-1DB10 6AV3503-1DB10 is a Siemens SIMATIC OP3 operator panel with a two-line, 20-character STN display, membrane keypad, MPI interface and RS232 configuration interface. Siemens specifies 24 VDC nominal supply, a 148 x 76 x 27 mm front panel and IP65 protection at the front when the gasket is correctly installed. Type SIMATIC OP3 operator panel Family SIMATIC HMI OP3 Platform Siemens SIMATIC HMI Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 6AV3503-1DB10 against the installed Siemens configuration Application Fit Maintenance of the documented SIMATIC HMI OP3 installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 6AV3503-1DB10 Hardware revision, firmware and project compatibility verify the panel cutout, 24 VDC supply, MPI/PPI network parameters, controller type, cable and legacy ProTool project compatibility. Scope note: 6AV3503-1DB10 is an operator panel, not a PLC or complete automation system. Only manufacturer-documented component data is stated on this page.
Siemens 6FX2001-5FN13 Motion Control Encoder PROFINET Single-Turn Absolute Encoder
6FX2001-5FN13 Siemens Motion Control Encoder PROFINET Single-Turn Absolute Encoder
Siemens · Motion Control Encoder 6FX2001-5FN13 6FX2001-5FN13 is a Siemens PROFINET Single-Turn Absolute Encoder in the Motion Control Encoder family. Single-turn absolute encoder; PROFINET; current FS15 catalog version 16-bit; 10–30 V DC; 6 mm shaft. Intended for PROFINET rotary-position measurement and motion control. Type PROFINET Single-Turn Absolute Encoder Family Motion Control Encoder Platform Siemens Motion Control Encoder Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 6FX2001-5FN13 to the installed Siemens configuration Application Fit PROFINET rotary-position measurement and motion control Single-turn absolute encoder; PROFINET; current FS15 catalog version 16-bit; 10–30 V DC; 6 mm shaft Like-for-like replacement with verified Motion Control Encoder configuration Verify Before Order Match the synchronous flange, 6 mm shaft, radial M12 connections, operating supply and encoder function status. Complete 6FX2001-5FN13 article number and hardware revision Use the GSDML matching the function status, select the approved telegram, then verify preset, counting direction and measured angle. Scope note: 6FX2001-5FN13 is supplied as PROFINET Single-Turn Absolute Encoder; system engineering, accessories and site acceptance are verified separately.
Siemens 6GK5206-2BD00-2AC2 SCALANCE X206 Managed Switch
6GK5206-2BD00-2AC2 Siemens SCALANCE X206 Managed Switch
SIEMENS · SIMATIC NET / SCALANCE 6GK5206-2BD00-2AC2 6GK5206-2BD00-2AC2 is a Siemens SCALANCE X206 Managed Switch. Match the complete MLFB, hardware revision, installed system and project release before replacement or commissioning. Type Industrial communication module Family SIMATIC NET / SCALANCE Platform SIMATIC NET / SCALANCE Scope Exact MLFB and installed configuration ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 6GK5206-2BD00-2AC2 against the installed Siemens configuration Application Fit Like-for-like Siemens spare replacement Documented automation, HMI or network service Migration planning with approved project backup Verify Before Order Complete MLFB, suffix and hardware revision Rack, panel, connector, power and network compatibility Firmware, project release and accessory configuration Scope note: 6GK5206-2BD00-2AC2 is supplied as Industrial communication module; system engineering, accessories and site acceptance are verified separately.
Siemens 6AU1455-2AD00-0AA0 SIMOTION Controller Module
6AU1455-2AD00-0AA0 Siemens SIMOTION Controller Module
SIEMENS · SIMOTION 6AU1455-2AD00-0AA0 6AU1455-2AD00-0AA0 is the Siemens SIMOTION Controller Module identified by the complete order number 6AU1455-2AD00-0AA0. The full MLFB, hardware revision, installed system and project release must be matched before replacement or commissioning. Type Motion-control module Family SIMOTION Platform SIMOTION Scope Exact MLFB and installed configuration ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 6AU1455-2AD00-0AA0 against the installed Siemens configuration Application Fit Like-for-like Siemens spare replacement Documented automation, HMI, network or drive service Migration planning with approved project backup Verify Before Order Complete MLFB, suffix and hardware revision Rack, panel, connector, power and network compatibility Firmware, project release and accessory configuration Scope note: 6AU1455-2AD00-0AA0 is supplied as Motion-control module; system engineering, accessories and site acceptance are verified separately.
Siemens 6DD2920-0AN1 SIMATIC TDC Module
6DD2920-0AN1 Siemens SIMATIC TDC Module
SIEMENS · SIMATIC TDC 6DD2920-0AN1 6DD2920-0AN1 is the Siemens SIMATIC TDC Module identified by the complete order number 6DD2920-0AN1. The full MLFB, hardware revision, installed system and project release must be matched before replacement or commissioning. Type Technology controller module Family SIMATIC TDC Platform SIMATIC TDC Scope Exact MLFB and installed configuration ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 6DD2920-0AN1 against the installed Siemens configuration Application Fit Like-for-like Siemens spare replacement Documented automation, HMI, network or drive service Migration planning with approved project backup Verify Before Order Complete MLFB, suffix and hardware revision Rack, panel, connector, power and network compatibility Firmware, project release and accessory configuration Scope note: 6DD2920-0AN1 is supplied as Technology controller module; system engineering, accessories and site acceptance are verified separately.

What Our Clients Say?

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry

Email us : sales1@amikon.cn

Reply within one working day

Visit us

32D Guomao Building, No.388, Hubin South Road, Siming District

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Contact Us
Location 32D Guomao Building, No.388, Hubin South Road, Siming District

Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.



Copyright @2026 SalesPlc Limited. Sitemap / Blog / XML / Terms And Conditions / Privacy Policy Network Supported

vk YouTube Tiktok Pinterest Reddit teitter linkedin. facebook

leave a message

leave a message
Feel free to communicate any order concerns – we provide quality products and best service.
submit

Home

Products

whatsApp

Contact Us

About Us

Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.

Where to Find Us

32D Guomao Building, No.388, Hubin South Road, Siming District +86 18150117685 sales1@amikon.cn

Follow Us