banner
Home Siemens

6AR1304-0CA00-0AA0 Siemens SICOMP SMP16-SFT304 Module

6AR1304-0CA00-0AA0 Siemens SICOMP SMP16-SFT304 Module

Siemens · SICOMP SMP16

6AR1304-0CA00-0AA0
6AR1304-0CA00-0AA0 is Siemens product designation SMP16-SFT304 for the SICOMP SMP16 industrial microcomputer platform. Siemens technical documentation identifies SMP16-SFT304 as a separate interrupt controller board on the SMP16 bus; it is a legacy, deleted product and must be matched by complete MLFB and system configuration.

Type
SICOMP SMP16-SFT304 interrupt controller board
Family
SICOMP SMP16
Platform
Siemens SICOMP SMP16 industrial microcomputer
Scope
Component
Application & Order CheckVerify 6AR1304-0CA00-0AA0 against the installed Siemens configuration
Application Fit
  • Maintenance of the documented SICOMP SMP16 installation
  • Like-for-like replacement using the complete Siemens identifier
  • Migration planning with Siemens lifecycle and compatibility guidance
Verify Before Order
  • Complete order number 6AR1304-0CA00-0AA0
  • Hardware revision, firmware and project compatibility
  • verify the SMP16 CPU generation, bus slot, interrupt routing, software support and the complete MLFB before installation.

Scope note: 6AR1304-0CA00-0AA0 is an SMP16 bus interrupt controller board, not a standalone controller system. Only manufacturer-documented component data is stated on this page.

  • Product Condition

    Original New with One Year Warranty
  • Parts Available

    In Stock and Same Day Shipping
  • Delivery Mode

    Shipping via DHL Fedex or UPS etc
  • Email:

    sales1@amikon.cn
  • Whatsapp/Mob:

    +86 18150117685
Description
Technical Product Profile

Siemens 6AR1304-0CA00-0AA0

SICOMP SMP16-SFT304 interrupt controller board

SiemensSMP16-SFT304SICOMP SMP16Exact Order No.

Overview

6AR1304-0CA00-0AA0 is Siemens product designation SMP16-SFT304 for the SICOMP SMP16 industrial microcomputer platform. Siemens technical documentation identifies SMP16-SFT304 as a separate interrupt controller board on the SMP16 bus; it is a legacy, deleted product and must be matched by complete MLFB and system configuration.

Siemens documentation confirms the exact order number maps to product designation SMP16-SFT304 and the SMP16 CPU manual identifies SMP16-SFT304 as a separate interrupt controller board on the SMP16 bus for 6AR1304-0CA00-0AA0. 6AR1304-0CA00-0AA0 is the complete Siemens MLFB and should not be shortened to another SFT module number.

Siemens lists 31 March 2009 as the product deletion date for 6AR1304-0CA00-0AA0 in the cited lifecycle notice. Before installation, verify the SMP16 CPU generation, bus slot, interrupt routing, software support and the complete MLFB before installation.

Technical Data & PDF

Manufacturer Siemens
Order number / MLFB 6AR1304-0CA00-0AA0
Product designation SMP16-SFT304
Platform SICOMP SMP16 industrial microcomputer
Module function Separate interrupt controller board on the SMP16 bus
Bus interaction Provides an interrupt vector during SMP16 INTA acknowledgement
Lifecycle evidence Product deletion date: 31 March 2009
Official source Siemens SICOMP product deletion notice (SMP16-SFT304)
Siemens SICOMP product deletion notice (SMP16-SFT304)Official ordering information, mechanical data, system-performance conditions and approval guidance
Open Official Datasheet
Siemens SICOMP SMP16-CPU06x Technical DescriptionAdditional Siemens official identity, application or lifecycle evidence for 6AR1304-0CA00-0AA0
Open Official Guide
Confirm the exact component and installed system configurationSend the complete part numbers, required system length, quantity, destination and clear label photos.

Lifecycle & Compatibility

6AR1304-0CA00-0AA0SICOMP SMP16 component 6AR1304-0CA00-0AA0
Verify ConfigurationVerify hardware, firmware, interfaces and project compatibility
Confirm CompatibilityConfirm exact order number and replacement or migration path
Like-for-like replacementMatch 6AR1304-0CA00-0AA0 by complete Siemens order number, hardware revision, firmware, interfaces and wiring.
Migration planningTreat any substitute for 6AR1304-0CA00-0AA0 as a system-level compatibility change and confirm the path with Siemens documentation.

Lifecycle and compatibility statements are limited to the cited Siemens documentation. Availability, condition and substitution must be confirmed separately.

Product FAQ

What is 6AR1304-0CA00-0AA0?

6AR1304-0CA00-0AA0 is a Siemens SICOMP SMP16-SFT304 interrupt controller board.

Which Siemens platform uses 6AR1304-0CA00-0AA0?

6AR1304-0CA00-0AA0 belongs to Siemens SICOMP SMP16 industrial microcomputer.

Is 6AR1304-0CA00-0AA0 a complete control system?

No. 6AR1304-0CA00-0AA0 is an SMP16 bus interrupt controller board, not a standalone controller system; 6AR1304-0CA00-0AA0 should be evaluated as one component of the installed system.

What does Siemens documentation confirm for 6AR1304-0CA00-0AA0?

For 6AR1304-0CA00-0AA0, Siemens documentation confirms the exact order number maps to product designation SMP16-SFT304 and the SMP16 CPU manual identifies SMP16-SFT304 as a separate interrupt controller board on the SMP16 bus.

Does every identifier in 6AR1304-0CA00-0AA0 matter?

Yes. 6AR1304-0CA00-0AA0 is the complete Siemens MLFB and should not be shortened to another SFT module number. The complete identifier 6AR1304-0CA00-0AA0 should be matched to the unit label and project records.

Can 6AR1304-0CA00-0AA0 be replaced by a unit with a different suffix?

Do not substitute 6AR1304-0CA00-0AA0 solely because another unit shares the same base family. For 6AR1304-0CA00-0AA0, verify the complete identifier, hardware revision, firmware, termination and application compatibility.

What should be checked before installing 6AR1304-0CA00-0AA0?

Before installing 6AR1304-0CA00-0AA0, verify the SMP16 CPU generation, bus slot, interrupt routing, software support and the complete MLFB before installation.

What lifecycle information applies to 6AR1304-0CA00-0AA0?

Siemens lists 31 March 2009 as the product deletion date for 6AR1304-0CA00-0AA0 in the cited lifecycle notice. For current service or replacement options for 6AR1304-0CA00-0AA0, confirm directly with Siemens.

Request a Verified Quotation

Send the complete component and matching system part numbers, required electrical length, quantity, target material, approval requirements, destination and clear label photos. Availability and condition will be confirmed before quotation.

Official manufacturer source: Siemens SICOMP product deletion notice (SMP16-SFT304). Siemens SICOMP SMP16-CPU06x Technical Description. Final suitability must be verified against the exact installed system, current certificates and official documentation.
Need this part?Quick Inquiry

We found other products you might like!

APOGEE Power Open Processor | 562-001 | Siemens
APOGEE Power Open Processor | 562-001 | Siemens
In Stock Original New Unused Siemens 562-001 APOGEE Power Open Processor
500-033260 Siemens DPU Device Programmer Test Unit
500-033260 Siemens DPU Device Programmer Test Unit
Siemens · Siemens Fire Safety Device Programming Units 500-033260 500-033260 is Siemens model DPU, a compact portable device programmer and test unit for FireFinder XLS and MSL devices. Siemens states that 500-033260 electronically programs and tests compatible detectors before installation through device microcomputer-chip non-volatile memory; it is an accessory, not a detector or control panel. Type DPU device programmer and test unit for FireFinder XLS and MSL devices Family Siemens Fire Safety Device Programming Units Platform Siemens FireFinder XLS and MSL device ecosystem Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 500-033260 against the installed Siemens configuration Application Fit Maintenance of the documented Siemens Fire Safety Device Programming Units installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 500-033260 Hardware revision, firmware and project compatibility verify the target detector/device family, current instructions, battery/charger condition, firmware compatibility and the fire-system commissioning procedure. Scope note: 500-033260 is a portable programming/test accessory, not a detector or fire alarm control panel. Only manufacturer-documented component data is stated on this page.
505-7003 Siemens SIMATIC TI505 Counter Encoder Module
505-7003 Siemens SIMATIC TI505 Counter Encoder Module
Siemens · SIMATIC TI505 505-7003 505-7003 is a Siemens SIMATIC TI505 high-speed counter encoder I/O module. Siemens specifies two channels with six counters total-one 24-bit counter and two 16-bit counters per channel-plus eight discrete outputs, quadrature and non-quadrature modes, and a 100 kHz default input filter. Type SIMATIC TI505 high-speed counter encoder module Family SIMATIC TI505 Platform Siemens SIMATIC TI505 PLC system Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 505-7003 against the installed Siemens configuration Application Fit Maintenance of the documented SIMATIC TI505 installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 505-7003 Hardware revision, firmware and project compatibility verify the TI505 base, supported CPU release, terminal block, field input level, external 24 VDC output supply, jumper configuration and ladder-logic configuration. Scope note: 505-7003 is a single-wide TI505 I/O module, not a PLC CPU or complete system. Only manufacturer-documented component data is stated on this page.
6AV3503-1DB10 Siemens SIMATIC OP3 Operator Panel
6AV3503-1DB10 Siemens SIMATIC OP3 Operator Panel
Siemens · SIMATIC HMI OP3 6AV3503-1DB10 6AV3503-1DB10 is a Siemens SIMATIC OP3 operator panel with a two-line, 20-character STN display, membrane keypad, MPI interface and RS232 configuration interface. Siemens specifies 24 VDC nominal supply, a 148 x 76 x 27 mm front panel and IP65 protection at the front when the gasket is correctly installed. Type SIMATIC OP3 operator panel Family SIMATIC HMI OP3 Platform Siemens SIMATIC HMI Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 6AV3503-1DB10 against the installed Siemens configuration Application Fit Maintenance of the documented SIMATIC HMI OP3 installation Like-for-like replacement using the complete Siemens identifier Migration planning with Siemens lifecycle and compatibility guidance Verify Before Order Complete order number 6AV3503-1DB10 Hardware revision, firmware and project compatibility verify the panel cutout, 24 VDC supply, MPI/PPI network parameters, controller type, cable and legacy ProTool project compatibility. Scope note: 6AV3503-1DB10 is an operator panel, not a PLC or complete automation system. Only manufacturer-documented component data is stated on this page.
330103-00-08-10-12-05 Bently Nevada 8 mm Proximity Probe
330103-00-08-10-12-05 Bently Nevada 8 mm Proximity Probe
Bently Nevada · 3300 XL 8 mm 330103-00-08-10-12-05 330103-00-08-10-12-05 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with M10 x 1 threads and without cable armor. 330103-00-08-10-12-05 specifies a 0 mm unthreaded length, 80 mm overall case length, 1.0 m (3.3 ft) total lead length, Miniature coaxial ClickLoc without connector protector; FluidLoc cable, and CSA, ATEX and IECEx multiple-approvals option; verify current certificate and installation applicability. 330103-00-08-10-12-05 is the probe component, not a complete transducer system. Probe 8 mm · Non-armored Lead 1.0 m · FluidLoc Thread M10 x 1 Agency Option 05 · CSA/ATEX/IECEx ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330103-00-08-10-12-05 to the correct 3300 XL system Application Fit Fluid-film bearing machinery vibration or position Static position and dynamic vibration measurement Keyphasor reference and speed measurement Verify Before Order Full part number and M10 x 1 mounting geometry 0 mm unthreaded length and 80 mm case length Option 12 is FluidLoc cable without connector protector Scope note: 330103-00-08-10-12-05 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.
330703-000-050-10-12-00 Bently Nevada XL 11 mm Probe
330703-000-050-10-12-00 Bently Nevada XL 11 mm Probe
Bently Nevada · 3300 XL 11 mm 330703-000-050-10-12-00 330703-000-050-10-12-00 is a Bently Nevada 3300 XL 11 mm standard-mount proximity probe component with M14 x 1.5 thread, without armor and with the standard FEP jacket, and a 1.0 m integral cable. Product type 3300 XL 11 mm standard-mount proximity probe component Order number 330703-000-050-10-12-00 Case thread M14 x 1.5 Armor Without armor; FEP jacket is standard ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330703-000-050-10-12-00 to the correct 3300 XL 11 mm system Application Fit Shaft vibration or position measurement on compatible machinery Large-gap 11 mm proximity measurement Like-for-like 3300 XL 11 mm probe replacement Verify Before Order Complete part number 330703-000-050-10-12-00 Component class, mounting or mechanical configuration Use with a 4.0 m 330730 extension cable and a 5.0 m 330780 Proximitor Sensor, or with an 8.0 m extension cable and a 9.0 m Proximitor Sensor. Scope note: These are complete 3300 XL 11 mm transducer system values, not standalone ratings for this individual component. They apply only to a correctly matched Bently Nevada probe, extension cable when required, and 330780 Proximitor Sensor.
330103-02-07-10-02-00 Bently Nevada 8 mm Proximity Probe
330103-02-07-10-02-00 Bently Nevada 8 mm Proximity Probe
Bently Nevada · 3300 XL 8 mm 330103-02-07-10-02-00 330103-02-07-10-02-00 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with M10 x 1 threads and without cable armor. 330103-02-07-10-02-00 specifies a 20 mm unthreaded length, 70 mm overall case length, 1.0 m (3.3 ft) total lead length, Miniature coaxial ClickLoc without connector protector; standard cable, and Agency approval option not required; no approval option selected. 330103-02-07-10-02-00 is the probe component, not a complete transducer system. Probe 8 mm · Non-armored Lead 1.0 m · standard Thread M10 x 1 Agency Option 00 · Not selected ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330103-02-07-10-02-00 to the correct 3300 XL system Application Fit Fluid-film bearing machinery vibration or position Static position and dynamic vibration measurement Keyphasor reference and speed measurement Verify Before Order Full part number and M10 x 1 mounting geometry 20 mm unthreaded length and 70 mm case length Option 02 is standard cable without connector protector Scope note: 330103-02-07-10-02-00 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.
Honeywell CC-PDIL01 24 VDC Digital Input Module
Honeywell CC-PDIL01 51405040-176 24 VDC Digital Input Module
@media (max-width:767px){.product-key-specs .quick-spec-grid{grid-template-columns:repeat(2,minmax(0,1fr))!important}} Honeywell · Experion Series C / C300 CC-PDIL01 24 VDC Digital Input Module · 51405040-176 · 24 VDC discrete input Key Reference 24 V DC Identification 32 Channels Product Role Open-Wire Detect System Family Series C / C300 ✉ sales17@amikon.cnWhatsApp +86 15359408275 Application & Order CheckBuilt for confident replacement sourcing Application Fit Experion Series C / C300 installed-base support Exact CC-PDIL01 · 51405040-176 identification 24 VDC discrete input maintenance and replacement Verify Before Order Complete model and part-number suffix Hardware revision and installed-system release Connector, termination and application requirements Lifecycle note: Use the unit nameplate and current Honeywell documentation as the final references before approving a replacement.

What Our Clients Say?

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry

Email us

Reply within one working day

Visit us

32D Guomao Building, No.388, Hubin South Road, Siming District

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Hot Tags
Contact Us
Location 32D Guomao Building, No.388, Hubin South Road, Siming District

Disclaimer : Featuredplc sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Featuredplc is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.



Copyright @2024 SalesPlc Limited. Sitemap / Blog / XML / Terms And Conditions / Privacy Policy Network Supported

vk YouTube Tiktok Pinterest Reddit teitter linkedin. facebook

leave a message

leave a message
Feel free to communicate any order concerns – we provide quality products and best service.
submit

Home

Products

whatsApp

Contact Us

About Us

Featuredplc has a team of experienced professionals working closely with overseas suppliers to provide our customers with a wide selection of products to meet their needs about delivery, price and brands . Featuredplc advantage lies not only in our ability to provide products, but also in our ability to establish close links with direct users, system integrators and provide professional spare parts solutions to enhance customers' competitiveness in their own markets. Integrated procurement, online component solutions at any time, 24/7 and 365 days a year to place orders. To meet the specific needs of many manufacturing customers, we have deployed a range of supplies,With our multi-channel distribution network and strong warehouse support, we are able to optimize the supply chain and provide competitive prices. 20 years ago, we set sail with a dream,20 years later, we are shouldering more hopes and expectations. Thanks to every friend who supports us, it is your trust that keeps us moving forward. Looking back, we are grateful; looking forward to the future, we are full of confidence! Celebrate the 20th anniversary together and welcome a more brilliant tomorrow! We will continue to provide the best service and quality assurance to our customers all over the world in the coming days, welcome to inquire for the latest discount offer!     Our warehouse is capable of holding up to 60,000 pallet spare parts as a regional hub, enabling us to store a wide range of products. This improves efficiency by providing our customers in the global region with faster delivery times and lower prices. Sustainable Partnership   Featuredplc is committed to building sustainable partnerships with customers and suppliers. It's a win-win-win situation. Sustainability also means responding to trends, evolution and innovation. This flexibility is also a guarantee of the future.We always focus on top brand products, top industrial partners innovation and industrial automation in the delivery of new components. Our sales office ensures that your to inquiries about spare parts are responsive. We actively participate in the customer's search for spare parts solutions or provide customized delivery advice. The customer's spare parts demand or delivery time question is always important to us.   + Availability, + Responsiveness: Your satisfaction is our top priority!   Featuredplc spare parts supply chain ensures your optimization of the delivery cycle of industrial parts.

Where to Find Us

32D Guomao Building, No.388, Hubin South Road, Siming District +86 15359408275 sales5@mooreplc.com

Follow Us