81724-00-08-10-02 Bently Nevada 7200 14 mm Probe
81724-00-08-10-02
81724-00-08-10-02 is a legacy Bently Nevada 7200-series 14 mm metric standard-mount proximity probe. 81724-00-08-10-02 has an M16x1.5 case thread, no armor, 0 mm unthreaded length, 80 mm overall case length, a 1.0 m integral lead, and a miniature male coaxial connector. 81724-00-08-10-02 is the probe component only, not a complete proximity transducer system; it requires the matching 7200 14 mm extension cable where applicable and the correctly calibrated 81725 Proximitor Sensor.
Scope note: 81724-00-08-10-02 does not include an extension cable, Proximitor Sensor, monitor or field wiring. Published range, scale factor and frequency response apply only to the correctly matched complete 7200 14 mm system.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales1@amikon.cnWhatsapp/Mob:
+86 18150117685Legacy manufacturer ordering data is preserved while component and complete-system ratings remain clearly separated.
81724-00-08-10-02 decodes exactly in Bently Nevada document 141604-01 as an 81724 metric 14 mm probe with option codes 00, 08, 10 and 02.
81724-00-08-10-02 belongs to the legacy 7200 family. Procurement, replacement and calibration decisions should use the installed nameplate and the complete matched transducer chain.
81724-00-08-10-02 does not include an extension cable, Proximitor Sensor, monitor or field wiring. Published range, scale factor and frequency response apply only to the correctly matched complete 7200 14 mm system.
| Manufacturer | Bently Nevada Corporation |
|---|---|
| Part number | 81724-00-08-10-02 |
| Lifecycle | Legacy 7200-series component |
| Component | 14 mm metric standard-mount proximity probe |
| Probe case thread | M16x1.5 |
| Jam nut / wrench flats | 24 mm jam nut; 12 mm wrench flats |
| Armor | Without armor |
| Agency approval configuration | No approval prefix; not the CA81724 North American approval version |
| Unthreaded length | 0 mm |
| Overall case length | 80 mm |
| Integral lead length | 1.0 m, +0.2 m/-0 m (39.4 in, +7.9 in/-0 in) |
| Connector | Miniature male coaxial connector |
| Probe / extension-cable operating temperature | -34.4 to +177 deg C (-30 to +350 deg F) |
| 14 mm humidity statement | 100% condensing, non-submersible when connectors are protected |
| Required companion components | Matching 7200 14 mm extension cable where required and the correct 81725 Proximitor Sensor |
| Manufacturer source | BNC 141604-01 Rev. NC (May 2000), archived manufacturer-authored datasheet |
| Complete-system Required matched chain | 81724-00-08-10-02 must be used with the correct 7200 14 mm probe, 14 mm extension cable where required, and matching 81725 Proximitor Sensor. |
| Complete-system Linear range | 4.06 mm (160 mil), from approximately 0.508 to 4.57 mm (20 to 180 mil) target gap |
| Complete-system Recommended gap | 2.54 mm (100 mil) |
| Complete-system Incremental scale factor | 3.94 mV/um (100 mV/mil), +/-16% including interchangeability error under the published conditions |
| Complete-system Linearity | Less than +/-165 um (+/-6.5 mil) deviation from best-fit straight line |
| Complete-system Frequency response | 0 to 10 kHz, +0/-3 dB, with up to 305 m (1,000 ft) of field wiring |
| Complete-system Minimum flat target diameter | 33.0 mm (1.3 in) |
Compatibility statements are limited to the cited manufacturer documentation. Availability, condition and substitution must be confirmed separately.
81724-00-08-10-02 is a legacy Bently Nevada 7200-series 14 mm metric standard-mount proximity probe. 81724-00-08-10-02 is one component of a matched proximity transducer system.
81724-00-08-10-02 uses an M16x1.5 case thread with a 24 mm jam nut and 12 mm wrench flats. 81724-00-08-10-02 is the without-armor metric standard-mount version.
81724-00-08-10-02 uses option 00 for 0 mm unthreaded length and option 08 for 80 mm overall case length.
81724-00-08-10-02 has a 1.0 m integral lead with +0.2 m/-0 m tolerance and a miniature male coaxial connector.
81724-00-08-10-02 has no approval prefix. 81724-00-08-10-02 must not be described as CA81724, which is the separate North American approval version.
81724-00-08-10-02 cannot operate as a complete transducer by itself. 81724-00-08-10-02 requires the matching 7200 14 mm extension cable where applicable and a correctly calibrated 81725 Proximitor Sensor.
81724-00-08-10-02 alone does not provide a guaranteed 4.06 mm range. The published range, scale factor and frequency response apply only when 81724-00-08-10-02 is installed in the specified matched 7200 14 mm system.
When replacing 81724-00-08-10-02, verify the full 81724-00-08-10-02 nameplate, M16x1.5 mounting geometry, 1.0 m lead, connector, required nominal system length, extension cable and matching 81725 Proximitor Sensor.
Send the complete part number, installed-system details, quantity, destination and clear label photos. Availability and condition will be confirmed before quotation.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming District
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported
About Us
Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.
Where to Find Us
32D Guomao Building, No.388, Hubin South Road, Siming District
+86 18150117685
sales1@amikon.cn
Follow Us
