991-25-70-01-00 Bently Nevada 991 Thrust Transmitter
991-25-70-01-00
991-25-70-01-00 is a Bently Nevada 991 two-wire, loop-powered thrust transmitter. The 991-25-70-01-00 order code specifies a centered 25-0-25 mil axial-displacement range, 7.0 m transducer-system length, 35 mm DIN-rail clips, and Agency option not required. 991-25-70-01-00 converts the signal from one compatible external 3300 NSv proximity probe and matching extension cable into a proportional 4-20 mA shaft-position signal for a machinery control system. Correct probe gap and range adjustment are critical, and the probe and extension cable are not part of 991-25-70-01-00 unless the quotation explicitly includes them.
Scope note: 991-25-70-01-00 identifies loop-powered thrust transmitter. Complete-system performance is labeled separately and does not apply to 991-25-70-01-00 alone.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales1@amikon.cnWhatsapp/Mob:
+86 18150117685loop-powered thrust transmitter
991-25-70-01-00 contains the transmitter signal-conditioning electronics, but 991-25-70-01-00 requires an external compatible 3300 NSv probe and matching extension cable. Those external components are not automatically included.
991-25-70-01-00 loop accuracy is a transmitter-loop specification. The PROX OUT range and scale-factor rows are explicitly complete transducer-system data measured with the compatible external chain and AISI 4140 target.
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 991 Thrust Transmitter |
| Order code | 991-25-70-01-00 |
| Measured variable | Shaft axial position (thrust) |
| Configured centered full scale | 25-0-25 mil |
| Signal output | 4-20 mAdc, two-wire, proportional to shaft axial position |
| External transducer input | One external 3300 NSv proximity probe plus matching extension cable; external components are not automatically included |
| Configured system length | 7.0 m |
| Power at transmitter | +12 to +35 Vdc |
| Loop accuracy | Within +/-1.5% typical over full scale from TEST input to a 250-ohm loop |
| Maximum loop resistance | 1,000 ohms including cable at 35 Vdc; Rloop(max) = 43.5 x (Vps - 12) ohms |
| Not OK behavior | Output below 3.6 mA within 100 us; restores within 0.1 second after the fault clears |
| PROX OUT | Non-isolated; 10 kohm output impedance calibrated for a 10 Mohm load |
| Transducer-system Prox Out range | 0.25 to 1.65 mm (10 to 65 mil) with an AISI 4140 target |
| Transducer-system scale factor | 7.87 mV/um (200 mV/mil), +/-6.5% typical |
| Transmitter operating temperature | -35 to +85 deg C |
| Transmitter storage temperature | -51 to +100 deg C |
| Relative humidity | 100% condensing, non-submerged, with coaxial connectors protected |
| Transmitter weight | 0.43 kg (0.9 lbm) |
| Mounting | 35 mm DIN-rail clips |
| Agency option | Agency option not required |
| Adjustment note | Probe gap and centered range must be set per the installation instructions |
| Official source | 141618 Rev. R |
Compatibility statements are limited to the cited manufacturer documentation. Availability, condition and substitution must be confirmed separately.
991-25-70-01-00 is a Bently Nevada 991 two-wire, loop-powered thrust transmitter that provides a proportional 4-20 mA axial-position signal to a machinery control system.
991-25-70-01-00 is configured for the centered 25-0-25 mil range according to the first option field in the official 991 order table.
991-25-70-01-00 requires one compatible external 3300 NSv proximity probe and a matching extension cable for the configured 7.0 m system length.
991-25-70-01-00 is the thrust-transmitter order code; the compatible 3300 NSv probe and extension cable are external components unless the quotation for 991-25-70-01-00 explicitly includes them.
991-25-70-01-00 requires +12 to +35 Vdc at the transmitter and 991-25-70-01-00 supplies a two-wire 4-20 mAdc output proportional to shaft axial position.
991-25-70-01-00 drives the loop below 3.6 mA within 100 us after a Not OK condition and 991-25-70-01-00 restores the output within 0.1 seconds after the condition clears.
991-25-70-01-00 depends on the correct probe gap and centered-range adjustment; an incorrect setting can prevent 991-25-70-01-00 from reaching full scale in the normal or counter direction.
991-25-70-01-00 supports axial-position trending and loop alarming, but 991-25-70-01-00 does not provide the complete diagnostics and protection logic of a continuous machinery monitoring system.
Send the complete part number, installed-system details, quantity, destination and clear label photos. Availability and condition will be confirmed before quotation.
Email us
Reply within one working day
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming District
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Disclaimer : Featuredplc sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Featuredplc is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2024 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported
About Us
Featuredplc has a team of experienced professionals working closely with overseas suppliers to provide our customers with a wide selection of products to meet their needs about delivery, price and brands . Featuredplc advantage lies not only in our ability to provide products, but also in our ability to establish close links with direct users, system integrators and provide professional spare parts solutions to enhance customers' competitiveness in their own markets. Integrated procurement, online component solutions at any time, 24/7 and 365 days a year to place orders. To meet the specific needs of many manufacturing customers, we have deployed a range of supplies,With our multi-channel distribution network and strong warehouse support, we are able to optimize the supply chain and provide competitive prices. 20 years ago, we set sail with a dream,20 years later, we are shouldering more hopes and expectations. Thanks to every friend who supports us, it is your trust that keeps us moving forward. Looking back, we are grateful; looking forward to the future, we are full of confidence! Celebrate the 20th anniversary together and welcome a more brilliant tomorrow! We will continue to provide the best service and quality assurance to our customers all over the world in the coming days, welcome to inquire for the latest discount offer! Our warehouse is capable of holding up to 60,000 pallet spare parts as a regional hub, enabling us to store a wide range of products. This improves efficiency by providing our customers in the global region with faster delivery times and lower prices. Sustainable Partnership Featuredplc is committed to building sustainable partnerships with customers and suppliers. It's a win-win-win situation. Sustainability also means responding to trends, evolution and innovation. This flexibility is also a guarantee of the future.We always focus on top brand products, top industrial partners innovation and industrial automation in the delivery of new components. Our sales office ensures that your to inquiries about spare parts are responsive. We actively participate in the customer's search for spare parts solutions or provide customized delivery advice. The customer's spare parts demand or delivery time question is always important to us. + Availability, + Responsiveness: Your satisfaction is our top priority! Featuredplc spare parts supply chain ensures your optimization of the delivery cycle of industrial parts.
Where to Find Us
32D Guomao Building, No.388, Hubin South Road, Siming District
+86 15359408275
sales5@mooreplc.com
Follow Us
