Products

New Products

Products

Explore Bently Nevada 3500 machinery protection modules and 3300 XL proximity systems, including monitors, power supplies, probes, Proximitor sensors and extension cables. Search by part number to find the right component for replacement, maintenance or system expansion.
  • 990-04-70-02-00 Bently Nevada Vibration Transmitter
    Bently Nevada · 990 Vibration Transmitter 990-04-70-02-00 990-04-70-02-00 is a Bently Nevada 990 two-wire, loop-powered vibration transmitter. The 990-04-70-02-00 order code specifies a 0-4 mil pp (0-100 um pp) peak-to-peak vibration range, 7.0 m transducer-system length, bulkhead screws, and Agency option not required. 990-04-70-02-00 converts the signal from one compatible external 3300 NSv proximity probe and matching extension cable into a proportional 4-20 mA output for a machinery control system. The probe and extension cable are not part of 990-04-70-02-00 unless the quotation explicitly includes them. Listed component 990 transmitter Configured range 0-4 mil pp (0-100 um pp) External chain length 7.0 m Mounting bulkhead screws ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 990-04-70-02-00 against the correct 990 Vibration Transmitter configuration Application Fit Machine vibration or thrust monitoring through a 4-20 mA transmitter Like-for-like replacement using the exact transmitter code Interface to a compatible probe chain and plant control system Verify Before Order Complete part number 990-04-70-02-00 Component type, mounting and electrical interface Verify the exact compatible 990 Vibration Transmitter configuration for 990-04-70-02-00. Scope note: 990-04-70-02-00 identifies loop-powered vibration transmitter. Complete-system performance is labeled separately and does not apply to 990-04-70-02-00 alone.
    Read More +
  • 990-04-70-01-00 Bently Nevada Vibration Transmitter
    Bently Nevada · 990 Vibration Transmitter 990-04-70-01-00 990-04-70-01-00 is a Bently Nevada 990 two-wire, loop-powered vibration transmitter. The 990-04-70-01-00 order code specifies a 0-4 mil pp (0-100 um pp) peak-to-peak vibration range, 7.0 m transducer-system length, 35 mm DIN-rail clips, and Agency option not required. 990-04-70-01-00 converts the signal from one compatible external 3300 NSv proximity probe and matching extension cable into a proportional 4-20 mA output for a machinery control system. The probe and extension cable are not part of 990-04-70-01-00 unless the quotation explicitly includes them. Listed component 990 transmitter Configured range 0-4 mil pp (0-100 um pp) External chain length 7.0 m Mounting 35 mm DIN-rail clips ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 990-04-70-01-00 against the correct 990 Vibration Transmitter configuration Application Fit Machine vibration or thrust monitoring through a 4-20 mA transmitter Like-for-like replacement using the exact transmitter code Interface to a compatible probe chain and plant control system Verify Before Order Complete part number 990-04-70-01-00 Component type, mounting and electrical interface Verify the exact compatible 990 Vibration Transmitter configuration for 990-04-70-01-00. Scope note: 990-04-70-01-00 identifies loop-powered vibration transmitter. Complete-system performance is labeled separately and does not apply to 990-04-70-01-00 alone.
    Hot Tags : 990-04-70-01-00
    Read More +
  • 990-04-50-01-00 Bently Nevada Vibration Transmitter
    Bently Nevada · 990 Vibration Transmitter 990-04-50-01-00 990-04-50-01-00 is a Bently Nevada 990 two-wire, loop-powered vibration transmitter. The 990-04-50-01-00 order code specifies a 0-4 mil pp (0-100 um pp) peak-to-peak vibration range, 5.0 m transducer-system length, 35 mm DIN-rail clips, and Agency option not required. 990-04-50-01-00 converts the signal from one compatible external 3300 NSv proximity probe and matching extension cable into a proportional 4-20 mA output for a machinery control system. The probe and extension cable are not part of 990-04-50-01-00 unless the quotation explicitly includes them. Listed component 990 transmitter Configured range 0-4 mil pp (0-100 um pp) External chain length 5.0 m Mounting 35 mm DIN-rail clips ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 990-04-50-01-00 against the correct 990 Vibration Transmitter configuration Application Fit Machine vibration or thrust monitoring through a 4-20 mA transmitter Like-for-like replacement using the exact transmitter code Interface to a compatible probe chain and plant control system Verify Before Order Complete part number 990-04-50-01-00 Component type, mounting and electrical interface Verify the exact compatible 990 Vibration Transmitter configuration for 990-04-50-01-00. Scope note: 990-04-50-01-00 identifies loop-powered vibration transmitter. Complete-system performance is labeled separately and does not apply to 990-04-50-01-00 alone.
    Hot Tags : 990-04-50-01-00
    Read More +
  • 9200-06-05-05-00 Bently Nevada Seismoprobe Velocity Transducer
    Bently Nevada · 9200 Seismoprobe 9200-06-05-05-00 9200-06-05-05-00 is a Bently Nevada Seismoprobe with 0-degree +/-100-degree calibration, terminal-block top connection, 1/2-20 UNF stud and no agency approval option. Type Seismoprobe two-wire velocity transducer Family 9200 Seismoprobe Scope Component Source OEM Verified ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 9200-06-05-05-00 against the installed machinery system Application Fit Maintenance of the documented 9200 Seismoprobe installation Like-for-like replacement using the complete part number Machinery monitoring applications supported by the cited OEM document Verify Before Order Complete part number 9200-06-05-05-00 Mounting, power, signal and interface compatibility Approval, rack, cable and companion-module requirements Scope note: 9200-06-05-05-00 identifies Monitoring instrument and compatible wiring required
    Read More +
  • 9200-02-01-10-00 Bently Nevada Seismoprobe Velocity Transducer
    Bently Nevada · 9200 Seismoprobe 9200-02-01-10-00 9200-02-01-10-00 is a Bently Nevada Seismoprobe with 45-degree calibration, top-mounted connector, circular M10 x 1 base and no agency approval option. Type Seismoprobe two-wire velocity transducer Family 9200 Seismoprobe Scope Component Source OEM Verified ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 9200-02-01-10-00 against the installed machinery system Application Fit Maintenance of the documented 9200 Seismoprobe installation Like-for-like replacement using the complete part number Machinery monitoring applications supported by the cited OEM document Verify Before Order Complete part number 9200-02-01-10-00 Mounting, power, signal and interface compatibility Approval, rack, cable and companion-module requirements Scope note: 9200-02-01-10-00 identifies Monitoring instrument and compatible wiring required
    Hot Tags : 9200-02-01-10-00
    Read More +
  • Probe Cable | 901100-90-03 | Bently Nevada
    In Stock Original New Unused Bently Nevada 901100-90-03 Probe Cable
    Read More +
  • 84661-8 Bently Nevada Armored Accelerometer Cable
    Bently Nevada · 200350 and 200355 Accelerometer Accessories 84661-8 84661-8 is a Bently Nevada standard armored cable listed for compatible 200350 and 200355 accelerometer installations. 84661-8 is the OEM standard 8 ft (2.4 m approximate) length, using 22 AWG two-conductor twisted shielded-pair construction, a two-socket moisture-resistant female connector at one end and terminal lugs at the other. 84661-8 is a cable component only, not a complete vibration measurement or protection system. Component Standard Cable, Armored Standard length 8 ft (2.4 m approximate) Conductors 22 AWG, two-conductor twisted shielded pair Terminations Two-socket moisture-resistant female connector to terminal lugs Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact OEM component and installed configuration Application Fit Sensor interconnect wiring Exact cable-length replacement planning Matched installed-system integration Verify Before Order Confirm the complete 84661-8 identification Confirm the exact component role and listed option Confirm companion equipment and installed-system requirements Scope note: 84661-8 does not include an accelerometer, monitor, rack, power supply or configured protection logic.
    Read More +
  • 84661-6 Bently Nevada Armored Accelerometer Cable
    Bently Nevada · 200350 and 200355 Accelerometer Accessories 84661-6 84661-6 is a Bently Nevada standard armored cable listed for compatible 200350 and 200355 accelerometer installations. 84661-6 is the OEM standard 6 ft (1.8 m approximate) length, using 22 AWG two-conductor twisted shielded-pair construction, a two-socket moisture-resistant female connector at one end and terminal lugs at the other. 84661-6 is a cable component only, not a complete vibration measurement or protection system. Component Standard Cable, Armored Standard length 6 ft (1.8 m approximate) Conductors 22 AWG, two-conductor twisted shielded pair Terminations Two-socket moisture-resistant female connector to terminal lugs Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact OEM component and installed configuration Application Fit Sensor interconnect wiring Exact cable-length replacement planning Matched installed-system integration Verify Before Order Confirm the complete 84661-6 identification Confirm the exact component role and listed option Confirm companion equipment and installed-system requirements Scope note: 84661-6 does not include an accelerometer, monitor, rack, power supply or configured protection logic.
    Hot Tags : 84661-6
    Read More +
  • 84661-50 Bently Nevada Armored Accelerometer Cable
    Bently Nevada · 200350 and 200355 Accelerometer Accessories 84661-50 84661-50 is a Bently Nevada standard armored cable listed for compatible 200350 and 200355 accelerometer installations. 84661-50 is the OEM standard 50 ft (15.2 m approximate) length, using 22 AWG two-conductor twisted shielded-pair construction, a two-socket moisture-resistant female connector at one end and terminal lugs at the other. 84661-50 is a cable component only, not a complete vibration measurement or protection system. Component Standard Cable, Armored Standard length 50 ft (15.2 m approximate) Conductors 22 AWG, two-conductor twisted shielded pair Terminations Two-socket moisture-resistant female connector to terminal lugs Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact OEM component and installed configuration Application Fit Sensor interconnect wiring Exact cable-length replacement planning Matched installed-system integration Verify Before Order Confirm the complete 84661-50 identification Confirm the exact component role and listed option Confirm companion equipment and installed-system requirements Scope note: 84661-50 does not include an accelerometer, monitor, rack, power supply or configured protection logic.
    Hot Tags : 84661-50
    Read More +
  • 84510-33 Bently Nevada 33 ft two-wire shielded armored cable with a two-socket female connector at one end and terminal lugs at the other
    Bently Nevada · 9200 and 74712 Seismoprobe Velocity Transducers 84510-33 84510-33 is the exact Bently Nevada 33 ft two-wire shielded armored cable with a two-socket female connector at one end and terminal lugs at the other supported by the cited manufacturer ordering information. 84510-33 provides the documented interconnection cable form for a compatible Seismoprobe velocity-transducer installation. Claims for 84510-33 are limited to the listed component; Seismoprobe velocity transducer, monitor or data collector, mounting hardware, field installation and approval documents are separate. Exact component 33 ft two-wire shielded armored cable with a two-socket female connector at one end and terminal lugs at the other Product family 9200 and 74712 Seismoprobe Velocity Transducers Form or length 33 ft (approximately 10.0 m) Lifecycle Exact OEM identity verified; current stock and delivered-unit approval not claimed Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact 9200 and 74712 Seismoprobe Velocity Transducers component configuration Application Fit Exact replacement of the documented 33 ft two-wire shielded armored cable with a two-socket female connector at one end and terminal lugs at the other Service work within a compatible 9200 and 74712 Seismoprobe Velocity Transducers rack configuration Lifecycle or migration review using the cited manufacturer source Verify Before Order Full 84510-33 label and hardware revision Matching front/rear module, rack slot, wiring and software configuration Lifecycle, replacement restrictions and current approval documentation Scope note: 84510-33 claims cover only the exact 33 ft two-wire shielded armored cable with a two-socket female connector at one end and terminal lugs at the other identity and attributes explicitly supported by the cited manufacturer source. Complete-system operation around 84510-33 depends on compatible field hardware, wiring, mounting, receiving equipment, configuration and applicable approval documents.
    Read More +
  • 84152-01 Bently Nevada Quad Relay Module for 3300/16
    Bently Nevada · 3300/16 84152-01 84152-01 is a legacy Bently Nevada 3300-series signal-input/quad-relay module identified by the OEM spare-parts table for the 3300/16 XY/Gap Dual Vibration Monitor. 84152-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/16 Family 3300/16 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 84152-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/16 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 84152-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 84152-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
    Read More +
  • 84147-01 Bently Nevada Hermetic Relay Module for 3300/50
    Bently Nevada · 3300/50 84147-01 84147-01 is a legacy Bently Nevada 3300-series dual-relay module identified by the OEM spare-parts table for the 3300/50 Zero-Speed Tachometer. 84147-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/50 Family 3300/50 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 84147-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/50 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 84147-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 84147-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
    Read More +
1 ... 93 94 95 96 97 ... 119
A total of119pages

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry

Email us : sales1@amikon.cn

Reply within one working day

Visit us

32D Guomao Building, No.388, Hubin South Road, Siming District

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Contact Us
Location 32D Guomao Building, No.388, Hubin South Road, Siming District

Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.



Copyright @2026 SalesPlc Limited. Sitemap / Blog / XML / Terms And Conditions / Privacy Policy Network Supported

vk YouTube Tiktok Pinterest Reddit teitter linkedin. facebook

leave a message

leave a message
Feel free to communicate any order concerns – we provide quality products and best service.
submit

Home

Products

whatsApp

Contact Us

About Us

Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.

Where to Find Us

32D Guomao Building, No.388, Hubin South Road, Siming District +86 18150117685 sales1@amikon.cn

Follow Us