Products

New Products

Products

Explore Bently Nevada 3500 machinery protection modules and 3300 XL proximity systems, including monitors, power supplies, probes, Proximitor sensors and extension cables. Search by part number to find the right component for replacement, maintenance or system expansion.
  • 84145-01 Bently Nevada Seismic Relay Module for 3300/65
    Bently Nevada · 3300/65 84145-01 84145-01 is a legacy Bently Nevada 3300-series seismic dual-relay module identified by the OEM spare-parts table for the 3300/65 Dual Probe Monitor. 84145-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/65 Family 3300/65 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 84145-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/65 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 84145-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 84145-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
    Read More +
  • 84140-01 Bently Nevada Epoxy Relay Module for 3300/50
    Bently Nevada · 3300/50 84140-01 84140-01 is a legacy Bently Nevada 3300-series dual-relay module identified by the OEM spare-parts table for the 3300/50 Dual-Setpoint Tachometer. 84140-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/50 Family 3300/50 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 84140-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/50 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 84140-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 84140-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
    Read More +
  • 82926-01 Bently Nevada Epoxy Relay Module for 3300/40
    Bently Nevada · 3300/40 82926-01 82926-01 is a legacy Bently Nevada 3300-series dual-relay module identified by the OEM spare-parts table for the 3300/40 Eccentricity Monitor. 82926-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/40 Family 3300/40 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 82926-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/40 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 82926-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 82926-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
    Read More +
  • 82367-01 Bently Nevada TC Input Module for 3300/30
    Bently Nevada · 3300/30 82367-01 82367-01 is a legacy Bently Nevada 3300-series thermocouple input module identified by the OEM spare-parts table for the 3300/30 Six-Channel Temperature Monitor. 82367-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/30 Family 3300/30 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 82367-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/30 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 82367-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 82367-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
    Read More +
  • 82365-01 Bently Nevada Epoxy Relay Module for 3300/30/35
    Bently Nevada · 3300/30 82365-01 82365-01 is a legacy Bently Nevada 3300-series alarm-relay/recorder-output module identified by the OEM spare-parts table for the 3300/30 and 3300/35 Six-Channel Temperature Monitors. 82365-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/30 Family 3300/30 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 82365-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/30 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 82365-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 82365-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
    Hot Tags : 82365-01
    Read More +
  • 81725-02 Bently Nevada 7200 14 mm Proximitor Sensor
    Bently Nevada · Legacy 7200 14 mm 81725-02 81725-02 is a legacy Bently Nevada 7200-series 14 mm Proximitor Sensor calibrated for a 9 m (29.5 ft) combined probe-and-extension-cable system length. 81725-02 accepts one compatible 7200 14 mm probe chain and supplies the signal-conditioning stage. 81725-02 is not a complete proximity transducer system and does not include the probe, extension cable, monitor or field wiring. Listed component Legacy 7200 14 mm Proximitor Sensor signal conditioner Nominal system length 9 m (29.5 ft) Power -18 to -24 Vdc at 13 mA maximum Operating temperature -51.1 to +100 deg C (-60 to +212 deg F) Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch the legacy Proximitor to the specified electrical length Application Fit Legacy 7200 14 mm proximity measurement chain Matched 5 m or 9 m electrical system build Exact component identification for legacy-system maintenance Verify Before Order Confirm the complete legacy part number Confirm the installed probe, cable and Proximitor family Confirm electrical length, target, monitor and lifecycle requirements Scope note: 81725-02 is only the signal conditioner. Published linear range, scale factor and frequency response apply to the correctly matched complete 7200 14 mm transducer system, not to 81725-02 alone.
    Read More +
  • 81725-01 Bently Nevada 7200 14 mm Proximitor Sensor
    Bently Nevada · Legacy 7200 14 mm 81725-01 81725-01 is a legacy Bently Nevada 7200-series 14 mm Proximitor Sensor calibrated for a 5 m (16.4 ft) combined probe-and-extension-cable system length. 81725-01 accepts one compatible 7200 14 mm probe chain and supplies the signal-conditioning stage. 81725-01 is not a complete proximity transducer system and does not include the probe, extension cable, monitor or field wiring. Listed component Legacy 7200 14 mm Proximitor Sensor signal conditioner Nominal system length 5 m (16.4 ft) Power -18 to -24 Vdc at 13 mA maximum Operating temperature -51.1 to +100 deg C (-60 to +212 deg F) Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch the legacy Proximitor to the specified electrical length Application Fit Legacy 7200 14 mm proximity measurement chain Matched 5 m or 9 m electrical system build Exact component identification for legacy-system maintenance Verify Before Order Confirm the complete legacy part number Confirm the installed probe, cable and Proximitor family Confirm electrical length, target, monitor and lifecycle requirements Scope note: 81725-01 is only the signal conditioner. Published linear range, scale factor and frequency response apply to the correctly matched complete 7200 14 mm transducer system, not to 81725-01 alone.
    Hot Tags : 81725-01
    Read More +
  • 81724-00-08-10-02 Bently Nevada 7200 14 mm Probe
    Bently Nevada · Legacy 7200 14 mm 81724-00-08-10-02 81724-00-08-10-02 is a legacy Bently Nevada 7200-series 14 mm metric standard-mount proximity probe. 81724-00-08-10-02 has an M16x1.5 case thread, no armor, 0 mm unthreaded length, 80 mm overall case length, a 1.0 m integral lead, and a miniature male coaxial connector. 81724-00-08-10-02 is the probe component only, not a complete proximity transducer system; it requires the matching 7200 14 mm extension cable where applicable and the correctly calibrated 81725 Proximitor Sensor. Listed component Legacy 7200 14 mm metric standard-mount proximity probe Mounting M16x1.5 thread; 24 mm jam nut; 12 mm wrench flats; without armor Case geometry 0 mm unthreaded length; 80 mm overall case length Lead / connector 1.0 m integral lead, +0.2 m/-0 m; miniature male coaxial connector Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch the legacy probe to the complete 7200 chain Application Fit Legacy 7200 14 mm proximity measurement chain Non-contacting machine vibration or position measurement Exact component identification for legacy-system maintenance Verify Before Order Confirm the complete legacy part number Confirm the installed probe, cable and Proximitor family Confirm electrical length, target, monitor and lifecycle requirements Scope note: 81724-00-08-10-02 does not include an extension cable, Proximitor Sensor, monitor or field wiring. Published range, scale factor and frequency response apply only to the correctly matched complete 7200 14 mm system.
    Read More +
  • 81546-01 Bently Nevada Hermetic Relay Module for 3300/16
    Bently Nevada · 3300/16 81546-01 81546-01 is a legacy Bently Nevada 3300-series signal-input/dual-relay module identified by the OEM spare-parts table for the 3300/16 XY/Gap Dual Vibration Monitor. 81546-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/16 Family 3300/16 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 81546-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/16 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 81546-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 81546-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
    Read More +
  • 81545-01 Bently Nevada Epoxy Relay Module for 3300/16
    Bently Nevada · 3300/16 81545-01 81545-01 is a legacy Bently Nevada 3300-series signal-input/dual-relay module identified by the OEM spare-parts table for the 3300/16 XY/Gap Dual Vibration Monitor. 81545-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/16 Family 3300/16 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 81545-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/16 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 81545-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 81545-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
    Hot Tags : 81545-01
    Read More +
  • 81544-01 Bently Nevada No-Relay I/O Module for 3300/16
    Bently Nevada · 3300/16 81544-01 81544-01 is a legacy Bently Nevada 3300-series signal-input/relay module with no relays identified by the OEM spare-parts table for the 3300/16 XY/Gap Dual Vibration Monitor. 81544-01 is not a standalone monitor; verify the complete parent-monitor configuration, relay logic and rear connector before replacement. Type 3300/16 Family 3300/16 Lifecycle Obsolete Scope Component ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckVerify 81544-01 against the installed hardware configuration Application Fit Like-for-like maintenance of the documented 3300/16 family Legacy machinery monitoring or control-system service Migration planning using manufacturer lifecycle guidance Verify Before Order Complete part number 81544-01 Rack, slot, power and companion-module compatibility Input, output, relay, barrier and field-wiring configuration Scope note: 81544-01 identifies the documented component or assembly. Part function and OEM parent-family mapping are verified; installation compatibility still requires the parent monitor nameplate.
    Hot Tags : 81544-01
    Read More +
  • 81305-040-00 Bently Nevada 7200 14 mm Extension Cable
    Bently Nevada · 7200 14 mm Proximity Transducer System 81305-040-00 81305-040-00 is a legacy Bently Nevada 7200-series 14 mm extension cable. 81305-040-00 is the 4.01 m (158 in), +/-10% option without armor, and the manufacturer states that the 040 length is for use only with the 81725-01 five-metre Proximitor Sensor. 81305-040-00 is a cable component only, not a probe, Proximitor Sensor, monitor or complete proximity system. Component 7200 14 mm extension cable Length 4.01 m (158 in), +/-10% Armor Without armor Required pairing 81725-01 five-metre Proximitor Sensor Email sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckConfirm the exact legacy component and installed chain Application Fit Legacy machinery monitoring installation Exact component identification and replacement Matched wiring or transducer-chain integration Verify Before Order Confirm the complete 81305-040-00 nameplate Confirm legacy option, length and component role Confirm current availability, compatibility and approval evidence Scope note: 81305-040-00 does not include the 14 mm probe, Proximitor Sensor, monitor or field wiring, and complete-system performance cannot be assigned to the cable alone.
    Read More +
1 ... 94 95 96 97 98 ... 119
A total of119pages

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry

Email us : sales1@amikon.cn

Reply within one working day

Visit us

32D Guomao Building, No.388, Hubin South Road, Siming District

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Contact Us
Location 32D Guomao Building, No.388, Hubin South Road, Siming District

Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.



Copyright @2026 SalesPlc Limited. Sitemap / Blog / XML / Terms And Conditions / Privacy Policy Network Supported

vk YouTube Tiktok Pinterest Reddit teitter linkedin. facebook

leave a message

leave a message
Feel free to communicate any order concerns – we provide quality products and best service.
submit

Home

Products

whatsApp

Contact Us

About Us

Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.

Where to Find Us

32D Guomao Building, No.388, Hubin South Road, Siming District +86 18150117685 sales1@amikon.cn

Follow Us