8440-2085 easYgen-3500XT
easYgen-3500XT-P1 Genset Controller · Complex Paralleling Genset Controller for Woodward easYgen-3000XT Series
Lifecycle note: Use the unit nameplate and current Woodward documentation as final references before approving a replacement.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales17@amikon.cnWhatsapp/Mob:
+86 15359408275easYgen-3500XT-P1 Genset Controller · Woodward easYgen-3000XT Series
Woodward 8440-2085 easYgen-3500XT is the easYgen-3500XT-P1 front-panel genset controller with an integrated display. Woodward product specification 37583 identifies this exact part number for complex generator-set paralleling and power-management applications.
Woodward 8440-2085 easYgen-3500XT measures three-phase generator and mains voltage up to 690 Vac, three-phase generator current and single-phase mains or ground current. The 1 A or 5 A current inputs are selected in software and must match the installed current transformers and protection scaling.
The P1 configuration supports single- and multiple-generator operation, mains-parallel control, automatic mains-failure and standby applications, critical-mode operation, and synchronization of generator and mains circuit breakers. The easYgen-3500XT platform can coordinate complex systems with compatible Woodward breaker controllers.
Commissioning Woodward 8440-2085 easYgen-3500XT requires verification of voltage and CT circuits, phase rotation, breaker feedback, protection settings, CAN and Ethernet architecture, application configuration, firmware and saved project data. The exact P1 package must not be confused with P2 or low-temperature variants.
| Manufacturer | Woodward |
|---|---|
| Model | 8440-2085 easYgen-3500XT |
| Product type | Complex Paralleling Genset Controller |
| System family | Woodward easYgen-3000XT Series |
| Exact configuration | easYgen-3500XT-P1, front-panel mounting with display |
| Generator voltage | Three-phase, up to 690 Vac |
| Generator current | Three-phase, 1 A or 5 A software selectable |
| Mains voltage | Three-phase, up to 690 Vac |
| Mains or ground current | Single-phase, 1 A or 5 A software selectable |
| Busbar voltage | Single-phase for P1 package |
| Complex paralleling | Single or multiple units, mains parallel and AMF applications |
| Fast breaker transition | Open and closed transition control, less than 100 ms as specified |
| Interfaces | Ethernet Modbus TCP, USB, RS-485 Modbus RTU and configurable CAN interfaces |
Use the installed-unit nameplate, current Woodward documentation and approved site engineering records as the final references.
Woodward 8440-2085 easYgen-3500XT is the front-panel easYgen-3500XT-P1 controller with an integrated display. Product specification 37583 distinguishes this P1 part number from cabinet-back P1, P2 and low-temperature easYgen-3000XT configurations.
Woodward 8440-2085 easYgen-3500XT supports compatible single- and multiple-generator systems, mains-parallel operation, automatic mains failure, standby operation and critical modes. The configured breaker logic and plant architecture must match the approved application design.
Woodward 8440-2085 easYgen-3500XT measures three-phase generator and mains voltage up to 690 Vac. Generator current is three-phase, while mains or ground current is single-phase; 1 A or 5 A inputs are software selectable.
The P1 package of Woodward 8440-2085 easYgen-3500XT uses a single-phase busbar-voltage measurement. Do not transfer P2 wiring assumptions; verify the exact terminal plan, potential-transformer arrangement and application configuration in manual 37580.
Woodward 8440-2085 easYgen-3500XT provides Ethernet Modbus TCP, USB, RS-485 Modbus RTU and configurable CAN interfaces in the easYgen-3000XT platform. Port settings, device roles, termination and network architecture require project-specific commissioning.
Commission Woodward 8440-2085 easYgen-3500XT by verifying sensing polarity and phase rotation, CT ratios, breaker feedback, protection thresholds, synchronization, load sharing, alarms, network communication and emergency shutdown before enabling automatic or parallel operation.
No direct substitution should be assumed. Woodward 8440-2085 easYgen-3500XT is the P1 front-panel model; P2, cabinet-back and low-temperature variants differ. Compare hardware package, terminals, sensing, display, firmware, licenses and configuration before migration.
Specify Woodward 8440-2085 easYgen-3500XT with the complete part number, P1 package, revision, serial number, firmware, project file, CT secondary rating, system voltage, breaker arrangement, network design and required approvals to verify the replacement.
Woodward product specification 37583 lists Woodward 8440-2085 easYgen-3500XT and its verified features. Technical manual 37580 provides P1 installation and configuration instructions; application-specific drawings and the saved project remain essential commissioning references.
Send the complete model, part number, revision, quantity, destination and nameplate photo. We will verify identification details before confirming availability and lead time.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming District
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported
About Us
Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.
Where to Find Us
32D Guomao Building, No.388, Hubin South Road, Siming District
+86 18150117685
sales1@amikon.cn
Follow Us
