FEA-01
Reference · 3AUA0000052932
Configuration note: Confirm the exact installed configuration before replacement or migration.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
info@amikon.cnWhatsapp/Mob:
+86 18020776786F-series extension module · 3AUA0000052932
ABB FEA-01 3AUA0000052932 is an F-series extension module intended for use in the applicable ABB drive system. ABB documentation specifies a 24 V DC supply with a ±10% tolerance and a detachable Phoenix Contact MSTBA 2.5/2-G-5.08 screw terminal block for the power connection. The module uses an Avago Versatile Link fiber-optic connection operating at 10 MBd, allowing it to form part of the documented F-series extension arrangement. The POWER OK diagnostic LED provides the specified local indication, while the exact function of an installed module depends on the drive, control unit and extension configuration in which it is used.
The FEA-01 is designed for mounting on a 35 × 7.5 mm DIN rail and has a painted and zinc-plated sheet-steel housing measuring 67 × 120 × 68 mm. ABB specifies IP20 protection and lists IEC 61800-5-1 for safety and IEC 61800-3 for EMC. Before fitting a replacement, verify the complete article number, the connected F-series equipment, 24 V DC supply wiring, fiber-optic connection, DIN-rail arrangement and environmental conditions. The relevant ABB manual should be used for the final installation, grounding, wiring and commissioning procedure.
| Manufacturer | ABB |
|---|---|
| Model / supplied reference | FEA-01 / 3AUA0000052932 |
| Product type | F-series extension module |
| Supply voltage | 24 V DC ±10% |
| Power supply terminal | Detachable screw terminal block, Phoenix Contact MSTBA 2.5/2-G-5.08 |
| Fiber-optic link | Avago Versatile Link, 10 MBd |
| Mounting | 35 × 7.5 mm DIN rail |
| Housing | Painted and zinc-plated sheet steel |
| Dimensions | 67 × 120 × 68 mm |
| Diagnostic LED | POWER OK |
| Degree of protection | IP20 |
| Safety standard | IEC 61800-5-1 |
| EMC standard | IEC 61800-3 |
Confirm the complete installed configuration and applicable ABB documentation before replacement or migration.
Check the product nameplate for the FEA-01 model, supplied reference 3AUA0000052932, hardware revision and fitted interface details. Compare these with the installed equipment before ordering.
ABB documentation identifies FEA-01 as a F-series extension module. Confirm the exact installed configuration before applying it in a drive or control system.
The applicable ABB documentation identifies: F-series extension module; ±10%; Avago Versatile Link, 10 MBd; 35 × 7.5 mm DIN rail; Painted and zinc-plated sheet steel. Final suitability depends on the exact installed version and configuration.
Do not assume interchangeability from a similar model. Check the complete nameplate, drive or control-unit version, interfaces, wiring and application before replacement.
Use FEA-01 only in an ABB drive or control configuration supported by the applicable ABB documentation and the installed equipment configuration.
Follow the ABB manual for the exact version. Isolate power and ensure that mounting, connectors, wiring, shielding and parameter settings are checked by qualified personnel.
The fixed procurement-status panel is retained from the approved template. Provide quantity and a clear nameplate photo so the offered configuration and dispatch details can be confirmed.
The fixed procurement-status panel is retained from the approved template. The quotation will confirm the offered unit condition and applicable warranty terms.
The unit will be checked and protected against static electricity, moisture and impact. Packaging, courier and dispatch details will be confirmed for the order destination.
Send the model, complete part number, quantity, destination and nameplate photo. We will verify identification details before confirming availability and lead time.
Technical information is based on ABB FEA-01 F-series Extension User’s Manual. Final suitability must be verified against the exact installed unit and official documentation.
Email us
Reply within one working dayVisit us
32D Guomao Building, No.388, Hubin South Road, Siming DistrictDisclaimer : Featuredplc sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Featuredplc is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2024 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported