Bently Nevada 330102-04-25-10-02-00 3300 XL 8 mm Armored Proximity Probe
330102-04-25-10-02-00
3300 XL 8 mm Armored Proximity Probe · Armored 3/8-24 UNF 8 mm probe with 0.4-inch unthreaded length, 2.5-inch case, one-metre cable and ClickLoc connector.
Lifecycle note: Use the unit nameplate and current official documentation as final references before approving a replacement.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales17@amikon.cnWhatsapp/Mob:
+86 153594082753300 XL 8 mm Armored Proximity Probe · Bently Nevada 3300 XL 8 mm Proximity System
Bently Nevada 330102-04-25-10-02-00 is an armored 3300 XL 8 mm proximity probe for non-contact shaft vibration and displacement measurement.
The complete code specifies 3/8-24 UNF threads, 0.4-inch unthreaded length, a 2.5-inch case, one-metre standard cable, miniature ClickLoc connector and no approval option.
Match the probe to the installed extension cable and Proximitor sensor, then verify insertion depth, armor route, connector engagement, total system length, target material, static gap and monitor scaling.
| Manufacturer | Bently Nevada |
|---|---|
| Model | 330102-04-25-10-02-00 |
| Probe family | 3300 XL 8 mm |
| Thread | 3/8-24 UNF |
| Probe armor | Included |
| Unthreaded length | 0.4 in |
| Overall case length | 2.5 in |
| Total probe length | 1.0 m (3.3 ft) |
| Connector option | 02 - miniature ClickLoc connector |
| Cable type | 75 ohm standard triaxial cable |
| Approval option | 00 - not required |
| System linear range | 2.0 mm (80 mils) |
| System scale factor | 7.87 V/mm (200 mV/mil) |
| Recommended radial gap | Approximately 1.27 mm (50 mils) |
Bently Nevada 330102-04-25-10-02-00 senses shaft-relative vibration and displacement in a matched 3300 XL 8 mm proximity system.
Bently Nevada 330102-04-25-10-02-00 has a 0.4-inch unthreaded section, a 2.5-inch case and 3/8-24 UNF threads.
Bently Nevada 330102-04-25-10-02-00 has a one-metre armored standard cable and miniature ClickLoc connector without a protector.
A matched system using Bently Nevada 330102-04-25-10-02-00 has a 2.0 mm linear range and nominal 7.87 V/mm scale factor.
The unarmored 330101 is not an automatic substitute for Bently Nevada 330102-04-25-10-02-00 when cable protection, clearances or routing requirements differ.
Verify insertion depth, armor and connector condition, static gap, gap voltage, linear response and monitor scaling for Bently Nevada 330102-04-25-10-02-00.
Provide the complete Bently Nevada 330102-04-25-10-02-00 code, extension cable and sensor, installation dimensions, quantity and destination.
Send the complete 330102-04-25-10-02-00 catalog number, revision, quantity, destination and nameplate photo. Identification details will be checked before quotation.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming DistrictDisclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported