Bently Nevada 330171-00-08-10-01-05 3300 5 mm Proximity Probe
330171-00-08-10-01-05
3300 5 mm Proximity Probe · Compact unarmored 1/4-28 UNF probe with 0.8-inch case, one-metre standard cable, connector protector and multiple approvals.
Lifecycle note: Use the unit nameplate and current official documentation as final references before approving a replacement.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales17@amikon.cnWhatsapp/Mob:
+86 153594082753300 5 mm Proximity Probe · Bently Nevada 3300 5 mm Proximity System
Bently Nevada 330171-00-08-10-01-05 is an unarmored 3300 5 mm proximity probe for constrained shaft vibration and axial-position installations.
The order code identifies 1/4-28 UNF threads, zero unthreaded length, a 0.8-inch case, one-metre standard cable, ClickLoc connector protector and multiple approvals.
Protect the unarmored cable from abrasion, match the extension cable and Proximitor sensor, and verify total length, target geometry, static gap, connector sealing and approvals.
| Manufacturer | Bently Nevada |
|---|---|
| Model | 330171-00-08-10-01-05 |
| Probe family | 3300 5 mm |
| Thread | 1/4-28 UNF-2A |
| Probe armor | Not included |
| Unthreaded length | 0.0 in |
| Overall case length | 0.8 in |
| Total probe length | 1.0 m (3.3 ft) |
| Connector option | 01 - miniature ClickLoc with protector |
| Cable type | 75 ohm standard triaxial cable |
| Approval option | 05 - multiple approvals |
| Probe tip diameter | 5.2 mm |
| System linear range | 2.0 mm (80 mils) |
| System scale factor | 7.87 V/mm (200 mV/mil) |
| Recommended gap | 1.27 mm (50 mils) |
Bently Nevada 330171-00-08-10-01-05 is the non-contact sensing element for shaft vibration or position in a matched 3300 5 mm system.
Bently Nevada 330171-00-08-10-01-05 has 1/4-28 UNF threads, zero unthreaded length and a 0.8-inch case.
Bently Nevada 330171-00-08-10-01-05 uses a one-metre unarmored standard triaxial cable with a protected ClickLoc connector.
The unarmored cable on Bently Nevada 330171-00-08-10-01-05 requires protected routing that avoids abrasion, excessive bending and connector contamination.
The armored 330172 is not an automatic substitute for Bently Nevada 330171-00-08-10-01-05 because cable diameter, clearances and routing constraints can differ.
Check thread engagement, cable protection, connector seating, static gap, gap voltage and linear channel response for Bently Nevada 330171-00-08-10-01-05.
Provide the full Bently Nevada 330171-00-08-10-01-05 code, extension cable and sensor, application and approval details, quantity and destination.
Send the complete 330171-00-08-10-01-05 catalog number, revision, quantity, destination and nameplate photo. Identification details will be checked before quotation.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming DistrictDisclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported