Home Bently Nevada Proximity Probe, Transducer, Sensor

Bently Nevada 84661-55 55-Foot Armored Interconnect Cable

Bently Nevada 84661-55 55-Foot Armored Interconnect Cable

Bently Nevada · Bently Nevada Low-Frequency Velocity Transducers

84661-55
55-Foot Armored Interconnect Cable · Fifty-five-foot stainless-steel armored interconnect cable with transducer-end female connector and monitor-end ring lugs.

Brand
Bently Nevada
Model
84661-55
Product role
55-Foot Armored Interconnect Cable
System family
Bently Nevada Low-Frequency Velocity Transducers
Key Reference84661-55
Application Fit
  • Bently Nevada Low-Frequency Velocity Transducers
  • Armored Low-Frequency Velocity-Sensor Cable
  • Fifty-five-foot stainless-steel armored interconnect cable with transducer-end female connector and monitor-end ring lugs.
Verify Before Order
  • Complete 84661-55 identification
  • Hardware revision and installed configuration
  • Power, interfaces, mounting and host compatibility

Lifecycle note: Use the unit nameplate and current official documentation as final references before approving a replacement.

  • Product Condition

    Original New with One Year Warranty
  • Parts Available

    In Stock and Same Day Shipping
  • Delivery Mode

    Shipping via DHL Fedex or UPS etc
  • Email:

    sales17@amikon.cn
  • Whatsapp/Mob:

    +86 15359408275
Description
Technical Product Profile

84661-55

55-Foot Armored Interconnect Cable · Bently Nevada Low-Frequency Velocity Transducers

Bently Nevada84661-55Armored Low-Frequency Velocity-Sensor CableBently Nevada Low-Frequency Velocity Transducers

Overview

Bently Nevada 84661-55 is a 55-foot armored interconnect cable for compatible low-frequency velocity-transducer systems.

The official cable family uses shielded 22 AWG conductors under stainless-steel armor, a moisture-resistant female connector at the transducer end and ring lugs at the monitor end.

Verify the exact route length, transducer connector, monitor lug assignments, armor and insulation condition, shield termination, temperature exposure and receiving-channel requirements before replacement.

Technical Data & PDF

Manufacturer Bently Nevada
Model 84661-55
Cable family 84661-AA standard armored interconnect cable
Configured length 55 ft (approximately 16.8 m)
Conductors Shielded 22 AWG (0.382 mm2) cable
Mechanical protection Stainless-steel armor
Transducer termination Moisture-resistant female connector
Monitor termination Ring lugs
Operating temperature -29 to +121 deg C
Permitted family length 3 to 96 ft
System role Low-frequency velocity-transducer to monitor connection
Official Bently Nevada low-frequency velocity transducer datasheetOfficial Baker Hughes datasheet defining the 84661-AA armored cable family, length rule, construction and temperature range.
Open Official PDF

Application, Configuration & Ordering

Identify 84661-55Confirm the complete catalog number and installed product role.
Verify configurationCheck supply, wiring, interfaces, revision, settings and host compatibility.
Install and commissionUse approved mounting, wiring and controlled functional tests.
Application dataRecord the connected equipment, configured duty and environmental conditions.
Ordering dataProvide 84661-55, revision, quantity, condition requirement, nameplate photo and destination.

Product FAQ

What function does Bently Nevada 84661-55 perform?

Bently Nevada 84661-55 carries the signal from a compatible low-frequency velocity transducer to monitoring equipment through an armored cable route.

What length is specified by Bently Nevada 84661-55?

The -55 suffix on Bently Nevada 84661-55 specifies a 55-foot cable, approximately 16.8 metres.

How is Bently Nevada 84661-55 mechanically protected?

Bently Nevada 84661-55 uses stainless-steel armor over shielded 22 AWG cable.

Which terminations are fitted to Bently Nevada 84661-55?

Bently Nevada 84661-55 has a moisture-resistant female connector at the transducer end and ring lugs at the monitor end.

Can a non-armored cable replace Bently Nevada 84661-55?

A non-armored cable is not an automatic substitute for Bently Nevada 84661-55 because routing protection, temperature and termination requirements can differ.

How should Bently Nevada 84661-55 be tested after installation?

Check continuity, insulation, shield termination, connector security, lug polarity and stable velocity-channel response for Bently Nevada 84661-55.

What ordering data is required for Bently Nevada 84661-55?

Provide the complete Bently Nevada 84661-55 code, connected transducer and monitor, route length and environment, quantity and destination.

Request a Verified Quotation

Send the complete 84661-55 catalog number, revision, quantity, destination and nameplate photo. Identification details will be checked before quotation.

We found other products you might like!

330101-00-08-20-02-05 Bently Nevada 8 mm Proximity Probe
330101-00-08-20-02-05 Bently Nevada 8 mm Proximity Probe
Bently Nevada · 3300 XL 8 mm 330101-00-08-20-02-05 330101-00-08-20-02-05 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF threads and without cable armor. 330101-00-08-20-02-05 specifies a 0.0 in unthreaded length, 0.8 in overall case length, 2.0 m (6.6 ft) total lead length, Miniature coaxial ClickLoc without connector protector; standard cable, and CSA, ATEX and IECEx multiple-approvals option; verify current certificate and installation applicability. 330101-00-08-20-02-05 is the probe component, not a complete transducer system. Probe 8 mm · Non-armored Lead 2.0 m · standard Thread 3/8-24 UNF Agency Option 05 · CSA/ATEX/IECEx ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330101-00-08-20-02-05 to the correct 3300 XL system Application Fit Fluid-film bearing machinery vibration or position Static position and dynamic vibration measurement Keyphasor reference and speed measurement Verify Before Order Full part number and 3/8-24 UNF mounting geometry 0.0 in unthreaded length and 0.8 in case length Option 02 is standard cable without connector protector Scope note: 330101-00-08-20-02-05 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.
330101-00-08-10-02-00 Bently Nevada 8 mm Proximity Probe
330101-00-08-10-02-00 Bently Nevada 8 mm Proximity Probe
Bently Nevada · 3300 XL 8 mm 330101-00-08-10-02-00 330101-00-08-10-02-00 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF threads and without cable armor. 330101-00-08-10-02-00 specifies a 0.0 in unthreaded length, 0.8 in overall case length, 1.0 m (3.3 ft) total lead length, Miniature coaxial ClickLoc without connector protector; standard cable, and Agency approval option not required; no approval option selected. 330101-00-08-10-02-00 is the probe component, not a complete transducer system. Probe 8 mm · Non-armored Lead 1.0 m · standard Thread 3/8-24 UNF Agency Option 00 · Not selected ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330101-00-08-10-02-00 to the correct 3300 XL system Application Fit Fluid-film bearing machinery vibration or position Static position and dynamic vibration measurement Keyphasor reference and speed measurement Verify Before Order Full part number and 3/8-24 UNF mounting geometry 0.0 in unthreaded length and 0.8 in case length Option 02 is standard cable without connector protector Scope note: 330101-00-08-10-02-00 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.
330101-00-08-05-02-05 Bently Nevada 8 mm Proximity Probe
330101-00-08-05-02-05 Bently Nevada 8 mm Proximity Probe
Bently Nevada · 3300 XL 8 mm 330101-00-08-05-02-05 330101-00-08-05-02-05 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF threads and without cable armor. 330101-00-08-05-02-05 specifies a 0.0 in unthreaded length, 0.8 in overall case length, 0.5 m (1.6 ft) total lead length, Miniature coaxial ClickLoc without connector protector; standard cable, and CSA, ATEX and IECEx multiple-approvals option; verify current certificate and installation applicability. 330101-00-08-05-02-05 is the probe component, not a complete transducer system. Probe 8 mm · Non-armored Lead 0.5 m · standard Thread 3/8-24 UNF Agency Option 05 · CSA/ATEX/IECEx ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330101-00-08-05-02-05 to the correct 3300 XL system Application Fit Fluid-film bearing machinery vibration or position Static position and dynamic vibration measurement Keyphasor reference and speed measurement Verify Before Order Full part number and 3/8-24 UNF mounting geometry 0.0 in unthreaded length and 0.8 in case length Option 02 is standard cable without connector protector Scope note: 330101-00-08-05-02-05 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.
330101-00-08-05-02-00 Bently Nevada 8 mm Proximity Probe
330101-00-08-05-02-00 Bently Nevada 8 mm Proximity Probe
Bently Nevada · 3300 XL 8 mm 330101-00-08-05-02-00 330101-00-08-05-02-00 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF threads and without cable armor. 330101-00-08-05-02-00 specifies a 0.0 in unthreaded length, 0.8 in overall case length, 0.5 m (1.6 ft) total lead length, Miniature coaxial ClickLoc without connector protector; standard cable, and Agency approval option not required; no approval option selected. 330101-00-08-05-02-00 is the probe component, not a complete transducer system. Probe 8 mm · Non-armored Lead 0.5 m · standard Thread 3/8-24 UNF Agency Option 00 · Not selected ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330101-00-08-05-02-00 to the correct 3300 XL system Application Fit Fluid-film bearing machinery vibration or position Static position and dynamic vibration measurement Keyphasor reference and speed measurement Verify Before Order Full part number and 3/8-24 UNF mounting geometry 0.0 in unthreaded length and 0.8 in case length Option 02 is standard cable without connector protector Scope note: 330101-00-08-05-02-00 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.
330101-00-15-10-02-00 Bently Nevada 8 mm Proximity Probe
330101-00-15-10-02-00 Bently Nevada 8 mm Proximity Probe
Bently Nevada · 3300 XL 8 mm 330101-00-15-10-02-00 330101-00-15-10-02-00 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF threads and without cable armor. 330101-00-15-10-02-00 specifies a 0.0 in unthreaded length, 1.5 in overall case length, 1.0 m (3.3 ft) total lead length, Miniature coaxial ClickLoc without connector protector; standard cable, and Agency approval option not required; no approval option selected. 330101-00-15-10-02-00 is the probe component, not a complete transducer system. Probe 8 mm · Non-armored Lead 1.0 m · standard Thread 3/8-24 UNF Agency Option 00 · Not selected ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330101-00-15-10-02-00 to the correct 3300 XL system Application Fit Fluid-film bearing machinery vibration or position Static position and dynamic vibration measurement Keyphasor reference and speed measurement Verify Before Order Full part number and 3/8-24 UNF mounting geometry 0.0 in unthreaded length and 1.5 in case length Option 02 is standard cable without connector protector Scope note: 330101-00-15-10-02-00 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.
330101-00-16-10-02-00 Bently Nevada 8 mm Proximity Probe
330101-00-16-10-02-00 Bently Nevada 8 mm Proximity Probe
Bently Nevada · 3300 XL 8 mm 330101-00-16-10-02-00 330101-00-16-10-02-00 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF threads and without cable armor. 330101-00-16-10-02-00 specifies a 0.0 in unthreaded length, 1.6 in overall case length, 1.0 m (3.3 ft) total lead length, Miniature coaxial ClickLoc without connector protector; standard cable, and Agency approval option not required; no approval option selected. 330101-00-16-10-02-00 is the probe component, not a complete transducer system. Probe 8 mm · Non-armored Lead 1.0 m · standard Thread 3/8-24 UNF Agency Option 00 · Not selected ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330101-00-16-10-02-00 to the correct 3300 XL system Application Fit Fluid-film bearing machinery vibration or position Static position and dynamic vibration measurement Keyphasor reference and speed measurement Verify Before Order Full part number and 3/8-24 UNF mounting geometry 0.0 in unthreaded length and 1.6 in case length Option 02 is standard cable without connector protector Scope note: 330101-00-16-10-02-00 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.
330101-00-18-10-02-05 Bently Nevada 8 mm Proximity Probe
330101-00-18-10-02-05 Bently Nevada 8 mm Proximity Probe
Bently Nevada · 3300 XL 8 mm 330101-00-18-10-02-05 330101-00-18-10-02-05 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF threads and without cable armor. 330101-00-18-10-02-05 specifies a 0.0 in unthreaded length, 1.8 in overall case length, 1.0 m (3.3 ft) total lead length, Miniature coaxial ClickLoc without connector protector; standard cable, and CSA, ATEX and IECEx multiple-approvals option; verify current certificate and installation applicability. 330101-00-18-10-02-05 is the probe component, not a complete transducer system. Probe 8 mm · Non-armored Lead 1.0 m · standard Thread 3/8-24 UNF Agency Option 05 · CSA/ATEX/IECEx ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330101-00-18-10-02-05 to the correct 3300 XL system Application Fit Fluid-film bearing machinery vibration or position Static position and dynamic vibration measurement Keyphasor reference and speed measurement Verify Before Order Full part number and 3/8-24 UNF mounting geometry 0.0 in unthreaded length and 1.8 in case length Option 02 is standard cable without connector protector Scope note: 330101-00-18-10-02-05 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.
330101-00-40-10-02-00 Bently Nevada 8 mm Proximity Probe
330101-00-40-10-02-00 Bently Nevada 8 mm Proximity Probe
Bently Nevada · 3300 XL 8 mm 330101-00-40-10-02-00 330101-00-40-10-02-00 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 UNF threads and without cable armor. 330101-00-40-10-02-00 specifies a 0.0 in unthreaded length, 4.0 in overall case length, 1.0 m (3.3 ft) total lead length, Miniature coaxial ClickLoc without connector protector; standard cable, and Agency approval option not required; no approval option selected. 330101-00-40-10-02-00 is the probe component, not a complete transducer system. Probe 8 mm · Non-armored Lead 1.0 m · standard Thread 3/8-24 UNF Agency Option 00 · Not selected ✉ sales1@amikon.cnWhatsApp +86 18150117685 Application & Order CheckMatch 330101-00-40-10-02-00 to the correct 3300 XL system Application Fit Fluid-film bearing machinery vibration or position Static position and dynamic vibration measurement Keyphasor reference and speed measurement Verify Before Order Full part number and 3/8-24 UNF mounting geometry 0.0 in unthreaded length and 4.0 in case length Option 02 is standard cable without connector protector Scope note: 330101-00-40-10-02-00 identifies a probe component. The published measurement range and scale factor belong to a complete, correctly matched 3300 XL 8 mm system.

What Our Clients Say?

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry

Email us : sales1@amikon.cn

Reply within one working day

Visit us

32D Guomao Building, No.388, Hubin South Road, Siming District

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Contact Us
Location 32D Guomao Building, No.388, Hubin South Road, Siming District

Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.



Copyright @2026 SalesPlc Limited. Sitemap / Blog / XML / Terms And Conditions / Privacy Policy Network Supported

vk YouTube Tiktok Pinterest Reddit teitter linkedin. facebook

leave a message

leave a message
Feel free to communicate any order concerns – we provide quality products and best service.
submit

Home

Products

whatsApp

Contact Us

About Us

Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.

Where to Find Us

32D Guomao Building, No.388, Hubin South Road, Siming District +86 18150117685 sales1@amikon.cn

Follow Us