PM860K01
Processor Unit Kit · 3BSE018100R1
Lifecycle note: Retain a verified controller application backup and reconcile the exact non-A processor, firmware and K01 accessory scope before exchange.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales17@amikon.cnWhatsapp/Mob:
+86 153 5940 8275Processor Unit Kit · AC 800M
ABB PM860K01, article number 3BSE018100R1, is an AC 800M processor kit based on the PM860 processor and TP830 base plate. The PM860 uses an MPC860 microprocessor running at 48 MHz, with 8 MB SDRAM and 2 MB flash PROM for firmware storage. These values refer to PM860, not the later PM860A variant.
The processor and base plate form the CPU assembly, with separate CEX-Bus and electrical ModuleBus connections. The base plate receives nominal 24 V DC; the processor power board generates isolated internal 5 V and 3.3 V supplies. ABB specifies a 119 mm width along the DIN rail, 186 mm height including the locking device and 135 mm wall depth, with approximately 1.1 kg for the K01 package including TP830 and bus terminations.
For system integration and MRO procurement, preserve the installed controller application, compatible firmware and the complete kit scope before replacement. Check the backup arrangement as part of the shutdown plan: PM860 has a documented minimum internal-battery memory retention time of 48 hours, while external battery options have different figures. Supplier acceptance should distinguish the processor-only item from the complete K01 package and verify the base plate, bus terminations and unit-specific identification.
| Manufacturer / kit model | ABB / PM860K01 |
|---|---|
| Article number | 3BSE018100R1 |
| Processor / base plate | PM860 / TP830 |
| Microprocessor | MPC860 |
| Processor clock | 48 MHz |
| SDRAM | 8 MB |
| Firmware flash PROM | 2 MB |
| Base-plate nominal supply | 24 V DC |
| Internal generated supplies | Isolated +5 V and +3.3 V |
| Internal backup battery | 3.6 V lithium, 950 mAh |
| Internal memory backup time | Minimum 48 hours for PM860 |
| External battery backup options | SB821: minimum 4 weeks; fully charged SB822: minimum 100 hours |
| Assembly dimensions | W 119 × H 186 × D 135 mm |
| K01 package mass | Approximately 1100 g, including TP830 and bus terminations |
Retain a verified controller application backup and reconcile the exact non-A processor, firmware and K01 accessory scope before exchange.
The ABB guide lists the same MPC860 clock but states that the same application executes twice as fast in PM860 as in PM851 or PM856. Use the documented controller performance and actual project timing rather than clock frequency alone when assessing a replacement.
No. The guide lists 8 MB SDRAM for PM860 and 16 MB for PM860A. Retain the exact non-A processor identity in this listing; a proposed A-variant replacement requires separate compatibility and identification review.
The documented PM860 internal-battery memory backup is a minimum of 48 hours, not a month. Plan an independent verified application backup before a long shutdown and assess the condition of the installed battery; do not assume a used battery guarantees the published new-unit retention time.
For PM860, ABB gives a minimum four weeks with the SB821 external lithium battery unit and a minimum 100 hours with a fully charged SB822 rechargeable unit. Identify the actual accessory and charge condition before selecting the applicable duration.
The external supply connects to the TP830 base-plate power terminals. The processor power board generates the internal isolated 5 V and 3.3 V rails. Those internal values are not alternate external supply settings.
Reconcile the quotation and receiving list with the kit scope. The guide’s K01 package mass includes TP830 and bus terminations. Confirm the processor, base plate and agreed termination accessories individually instead of accepting a processor photograph as proof of a complete kit.
The guide notes that the CEX-Bus contact protrudes an additional 4 mm when not mounted. Distinguish the installed rail width from the loose-unit handling envelope so the exposed connector is not mistaken for dimensional nonconformity or damaged in packing.
No. The CEX-Bus expands communication interfaces, while the electrical ModuleBus serves the I/O arrangement. Identify each socket from the TP830 assembly drawing and retain the installed bus topology when planning removal, termination or replacement.
Send the model, complete part number, quantity, destination and nameplate photo. We will verify identification details before confirming availability and lead time.
Official PDF: ABB PM860K01 Official Manual Extract. File size is below 1 MB; verify the exact installed hardware and configuration before use.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming District
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported
About Us
Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.
Where to Find Us
32D Guomao Building, No.388, Hubin South Road, Siming District
+86 18150117685
sales1@amikon.cn
Follow Us
