LC1D32F7C
3-Pole 32 A Contactor · 110 V AC 50/60 Hz Coil
Configuration note: Use the complete nameplate and current manufacturer documentation as final references before approving a replacement.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales17@amikon.cnWhatsapp/Mob:
+86 153594082753-Pole 32 A Contactor · 110 V AC 50/60 Hz Coil
Schneider Electric LC1D32F7C is a TeSys Deca three-pole contactor with three normally open power poles. It is rated 32 A for AC-3 and AC-3e motor loads up to 440 V and uses a 110 V AC 50/60 Hz control coil.
The contactor includes one normally open and one normally closed auxiliary contact, with the NC contact designed as a mirror contact. Screw-clamp terminals and DIN-rail or base mounting support standard industrial motor-control panel installation.
The exact LC1D32F7C code must be retained because pole arrangement, current rating, coil voltage/frequency and regional suffix determine suitability. Verify motor voltage and power, control voltage, protective coordination, enclosure and certification before replacement.
| Manufacturer | Schneider Electric |
|---|---|
| Complete model | LC1D32F7C |
| Product range | TeSys Deca |
| Product type | Contactor |
| Power poles | 3P, 3 normally open |
| Utilization category | AC-3 / AC-3e up to 440 V |
| Rated operational current | 32 A at ≤440 V AC, ≤60°C |
| AC-1 current | 50 A |
| Control coil | 110 V AC, 50/60 Hz |
| Rated operational voltage | ≤690 V AC 25–400 Hz; ≤225 V DC |
| Motor power at 220/240 V | 7.5 kW |
| Motor power at 380/400 V | 15 kW |
| Motor power at 415/440 V | 15 kW |
| Motor power at 500 V | 18.5 kW |
| Motor power at 660/690 V | 18.5 kW |
| Built-in auxiliary contacts | 1 NO + 1 NC; NC mirror contact |
| Conventional free-air thermal current | 50 A power; 10 A signalling |
| Rated insulation voltage | 690 V |
| Impulse withstand voltage | 6 kV |
| Overvoltage / pollution | Category III / degree 3 |
| Mechanical durability | 15 million cycles |
| Electrical durability | 1.6 million cycles at 32 A AC-3/AC-3e ≤440 V |
| Maximum operating rate | 3600 cycles/hour at 60°C |
| Surge suppression | No built-in suppressor |
| Mounting | DIN rail or plate / base |
| Terminals | Screw clamp |
| Standards | IEC 60947-1; IEC 60947-4-1; GB/T 14048.4 |
| Certifications listed | CE, UKCA, CCC |
| Front protection | IP2X |
| Operating temperature | -40°C to +60°C; derating from +60°C to +70°C |
| Storage temperature | -60°C to +80°C |
| Dimensions | 85 × 45 × 92 mm |
| Weight | 0.375 kg |
Schneider Electric LC1D32F7C is a TeSys Deca three-pole 32 A AC-3/AC-3e contactor with a 110 V AC 50/60 Hz coil.
Schneider Electric LC1D32F7C switches compatible three-phase motor or AC loads and provides built-in 1 NO plus 1 NC auxiliary contacts.
Schneider Electric LC1D32F7C requires checking 32 A at ≤440 V AC-3/AC-3e, 110 V coil, motor kW by voltage, terminal type and environmental limits.
Schneider Electric LC1D32F7C must be checked against motor current and power, utilization category, control voltage and frequency, protection and panel dimensions.
Schneider Electric LC1D32F7C requires correct isolation, conductor sizing, terminal torque, protective coordination, DIN-rail or plate mounting and adequate enclosure temperature.
Schneider Electric LC1D32F7C should be tested for coil pickup and dropout, power-pole continuity, auxiliary logic, interlocks and motor rotation.
Schneider Electric LC1D32F7C is supported by a current Schneider Electric product datasheet dated January 2025; confirm availability and certificate needs at quotation.
Schneider Electric LC1D32F7C requires the full LC1D32F7C code, motor data, coil supply, quantity, certification needs and nameplate photos.
Schneider Electric LC1D32F7C data comes from the Schneider Electric datasheet for exact model LC1D32F7C.
Send the complete Schneider Electric model, part number, revision, quantity, destination and nameplate photo. Identification details will be verified before availability and lead time are confirmed.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming District
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported
About Us
Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.
Where to Find Us
32D Guomao Building, No.388, Hubin South Road, Siming District
+86 18150117685
sales1@amikon.cn
Follow Us
