DSTC 404
Powered terminator · Order code 57520001-DS · Used with DSTC 452 modem on the SDB side · 260 × 120 × 10 mm
Lifecycle note: Confirm the modem arrangement, SDB/LDB position, powered termination requirement and complete product ID before replacement. Similar DSTC units are not automatically interchangeable.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
info@amikon.cnWhatsapp/Mob:
+86 18020776786Powered termination unit · Advant S100 I/O
ABB identifies DSTC 404, product ID 57520001-DS, as a powered terminator and module termination unit.
According to ABB, DSTC 404 is used with the DSTC 452 modem that connects the SDB to the LDB. The DSTC 404 provides termination on the SDB side, with one unit required per modem.
ABB also states that DSTC 404 is used when the modem is an intermediate modem. Confirm the exact network position, wiring and product ID against the installed equipment before ordering.
| Brand | ABB |
|---|---|
| Type Designation | DSTC 404 |
| Product ID / Order Code | 57520001-DS |
| Catalog Description | DSTC 404 Terminator, powered |
| Medium Description | DSTC 404 Terminator, powered - Classic |
| Product Type | Module termination unit |
| Application | Termination used with DSTC 452 modem |
| Installation Position | SDB side |
| Quantity Rule | One DSTC 404 per modem |
| Product Net Depth / Length | 260 mm |
| Product Net Width | 120 mm |
| Product Net Height | 10 mm |
| Product Net Weight | 0.02 kg |
| Customs Tariff Number | 85389091 |
Confirm the modem arrangement, SDB/LDB position, powered termination requirement and complete product ID before replacement. Similar DSTC units are not automatically interchangeable.
ABB lists DSTC 404 as a powered terminator and module termination unit.
The complete ABB product ID and order code is 57520001-DS.
ABB states that DSTC 404 is used in conjunction with the DSTC 452 modem.
ABB specifies the SDB side, where the unit provides termination for the modem connection between SDB and LDB.
ABB states that one DSTC 404 is needed per modem.
ABB notes that DSTC 404 is used when the modem is an intermediate modem; the installed network arrangement must be verified.
ABB lists 260 mm depth or length, 120 mm width and 10 mm height.
ABB lists the product net weight as 0.02 kg.
Verify DSTC 404, product ID 57520001-DS, the DSTC 452 modem, the SDB-side position, wiring and powered termination requirement.
Send the model, complete part number, quantity, destination and nameplate photo. We will verify identification details before confirming availability and lead time.
Technical information is based on ABB 57520001-DS Product Details. Final suitability must be verified against the exact installed unit and official documentation.
Email us
Reply within one working dayVisit us
32D Guomao Building, No.388, Hubin South Road, Siming DistrictDisclaimer : Featuredplc sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Featuredplc is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2024 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported