Products

New Products

Products

ABB AC 800M controllers and S800 I/O support System 800xA architectures, while Advant OCS and Bailey INFI 90 modules meet legacy system replacement requirements. Browse processor, communication, interface and power modules by series or part number.
  • ABB Satt S200-TB3 S200TB3 200-TB3 terminal base unit
    ABB · S200 I/O System S200-TB3 / S200TB3 / 200-TB3 Three-row terminal base for connecting an S200 I/O unit and two- or three-wire devices, with internally connected 0 V DC and +24 V DC sensor-supply rows · Order code 200-TB3 Terminal Rows 1 × 16 + 2 × 18 Current Capacity 10 A max. Maximum Voltage 132 V AC rms Conductor Size 0.5–2.5 mm² ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit S200 I/O installations using two- or three-wire devices Field sensor circuits requiring distributed +24 V DC terminals Exact replacement for an installed 200-TB3 terminal base Verify Before Order Official order code 200-TB3 Inserted I/O unit and backplane key coding 0 V DC, +24 V DC and signal terminal assignments Lifecycle note: Confirm the exact 200-TB3 order code, the inserted I/O unit, terminal-base coding, signal wiring and sensor-supply arrangement before replacement.
    Read More +
  • ABB Satt S200-TBNF S200TBNF 200-TBNF fused terminal base unit
    ABB · S200 I/O System S200-TBNF / S200TBNF / 200-TBNF Fused two-row terminal base for S200 I/O units, primarily for eight-channel input or output units and delivered with eight 3 A fuses · Order code 200-TBNF Terminal Rows 2 rows × 10 terminals Fuse Holders 8 × 5 × 20 mm Maximum Voltage 264 V AC rms Current Capacity 10 A max. ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit S200 I/O installations requiring a fused terminal base Eight-channel input or output units 200-OW8 applications using the supplied 3 A channel fuses Verify Before Order Official order code 200-TBNF Inserted I/O unit and backplane key coding Fuse rating, channel wiring and operating voltage Lifecycle note: Replacement selection must match the 200-TBNF order code, the inserted I/O unit, channel wiring, fuse dimensions and rating, voltage class and backplane coding.
    Read More +
  • ABB Satt S200-TB3T S200TB3T 200-TB3T terminal base unit
    ABB · S200 I/O System S200-TB3T / S200TB3T / 200-TB3T Terminal base for an S200 I/O unit and two- or three-wire devices, mainly intended for the 200-IT8 temperature input unit · Order code 200-TB3T Terminal Rows 3 screw-terminal rows Signal Terminals 16 upper-row terminals Cold-Junction Inputs 6 inputs for external thermistor Maximum Voltage 132 V AC rms ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit S200 I/O installations requiring the 200-TB3T terminal base 200-IT8 temperature-input applications using external cold-junction compensation Two- and three-wire field-device terminations Verify Before Order Official order code 200-TB3T Inserted I/O unit and its terminal-base coding Field wiring, supply, shield and thermistor connections Lifecycle note: S200 terminal bases are configuration-dependent accessories. Verify the exact 200-TB3T order code, the inserted I/O unit, terminal coding, cold-junction arrangement and field wiring before replacement.
    Read More +
  • ABB Satt S200-TB2 S200TB2 200-TB2 terminal base unit
    ABB · S200 I/O System Accessories 200-TB2 S200 terminal base unit · Submitted aliases S200-TB2 and S200TB2 · Official type 200-TB2 · Three screw-terminal rows for two-wire devices Official Type 200-TB2 Terminal Rows 16 signal, 18 zero-volt, 2 positive 24 V DC terminals Current Capacity 10 A maximum Wire Size 0.5–2.5 mm² / AWG 20–12 ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit ABB Satt S200 I/O installations using two-wire field devices Terminal-base replacement with separate signal, 0 V DC and +24 V DC rows Projects specifying S200-TB2, S200TB2 or official type 200-TB2 Verify Before Order Submitted aliases S200-TB2 and S200TB2 against official type 200-TB2 Inserted S200 I/O unit and backplane key coding Two-wire device count, signal allocation and power-distribution scheme Wire size, 10 A current limit and 132 V AC maximum rating Lifecycle note: ABB identifies the official order code as 200-TB2. Confirm the inserted I/O unit, mechanical code key, two-wire device arrangement, signal terminals and power distribution before replacement.
    Read More +
  • ABB Satt S200-PS13 S200PS13 200-PS1.3 power supply unit
    ABB · S200 I/O System Accessories 200-PS1.3 S200 remote I/O power supply · Submitted aliases S200-PS13 and S200PS13 · Official type 200-PS1.3 · 24 V DC, 1.3 A maximum output Official Type 200-PS1.3 Input Voltage 85–265 V AC Nominal Output 24 V DC Output Current 1.3 A maximum ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit ABB Satt remote S200 I/O installations Power supply for up to four compatible S200 adapter units Replacement projects specifying S200-PS13, S200PS13 or official type 200-PS1.3 Verify Before Order Submitted aliases S200-PS13 and S200PS13 against official type 200-PS1.3 85–265 V AC input and 47–63 Hz site supply 24 V DC load requirement and 1.3 A maximum output Adapter count, screw-terminal wiring and enclosure space Lifecycle note: ABB identifies the official order code as 200-PS1.3. Confirm that the submitted S200-PS13 or S200PS13 identifier corresponds to this 1.3 A S200 power supply and verify the installed mains supply, load and adapter configuration before replacement.
    Read More +
  • ABB Satt 200-OE4 S200OE4 4-channel analog output unit
    ABB · S200 I/O for Satt 200-OE4 S200 analog output unit · Model 200-OE4 · Identifier S200OE4 · 4 voltage or current outputs · 12-bit resolution Output Type Analog voltage or current Channels 4 outputs Output Ranges 0–10 V DC, ±10 V DC, 0–20 mA, 4–20 mA Resolution 12 bit ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit ABB Satt control systems using S200 I/O Four-channel analog voltage or current signal output Replacement projects explicitly specifying 200-OE4 or S200OE4 Verify Before Order Exact ABB Satt model 200-OE4 and compact identifier S200OE4 Configured voltage or current output range for every channel Terminal base unit, load wiring and external 24 V DC supply Software configuration and installed S200 I/O station compatibility Lifecycle note: ABB states that S200 I/O is in the Active lifecycle phase and may be retained when migrating a Satt system to System 800xA. Confirm the terminal base, output ranges, connected loads, external supply and software configuration before replacement.
    Read More +
  • ABB Satt 200-IE8 S200IE8 8-channel analog input unit
    ABB · S200 I/O for Satt 200-IE8 S200 analog input unit · Model 200-IE8 · Identifier S200IE8 · 8 voltage or current inputs · 12-bit resolution Input Type Analog voltage or current Channels 8 single-ended inputs Input Ranges 0–10 V DC, ±10 V DC, 0–20 mA, 4–20 mA Resolution 12 bit ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit ABB Satt control systems using S200 I/O Eight-channel analog voltage or current signal acquisition Replacement projects explicitly specifying 200-IE8 or S200IE8 Verify Before Order Exact ABB Satt model 200-IE8 and compact identifier S200IE8 Configured voltage or current input range for every channel Terminal base unit, wiring and 24 V DC power arrangement Software configuration and installed S200 I/O station compatibility Lifecycle note: ABB states that S200 I/O is in the Active lifecycle phase and may be retained when migrating a Satt system to System 800xA. Confirm the installed terminal base, channel ranges, wiring and software configuration before replacement.
    Read More +
  • ABB FIO100 P-HB-FIO-1000C100 fieldbus termination base
    ABB · ABB Bailey FOUNDATION Fieldbus FIO100 FOUNDATION Fieldbus interface and termination base · Part number P-HB-FIO-1000C100 · 31.25 kbit/s H1 communication · multiple bus topologies Protocol FOUNDATION Fieldbus H1 Data Rate 31.25 kbit/s Device Role FIO100 interface module Topologies Block, daisy-chain, trunk/spur and tree ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit ABB FOUNDATION Fieldbus installations using the FIO100 interface module H1 segment interface and termination-base maintenance Replacement projects explicitly specifying FIO100 and P-HB-FIO-1000C100 Verify Before Order Exact FIO100 model and P-HB-FIO-1000C100 part number FOUNDATION Fieldbus H1 segment design and terminator arrangement Required block, daisy-chain, trunk/spur or tree topology Installed field wiring, segment power, grounding and connected devices Lifecycle note: FIO100 is documented in ABB legacy FOUNDATION Fieldbus application material. Confirm the exact P-HB-FIO-1000C100 identification, segment topology, terminator placement, power arrangement and connected devices before replacement.
    Read More +
  • ABB TB840 3BSE021456R1 ModuleBus cluster modem
    啊ABB · S800 I/O / System 800xA TB840 ModuleBus Cluster Modem · Product ID 3BSE021456R1 · Optical modem for 1+1 redundant operation · 10 Mbit/s communication Product Type ModuleBus Cluster Modem Operation 1+1 redundant Communication Speed 10,000 kbit/s Replacement TB840A 3BSE037760R1 ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit ABB S800 I/O installations using an optical ModuleBus cluster 1+1 redundant ModuleBus modem configurations Replacement projects explicitly specifying TB840 and 3BSE021456R1 Verify Before Order Exact ABB type designation TB840 Complete product ID 3BSE021456R1 Installed termination unit and redundant I/O arrangement Optical ModuleBus cabling, cluster address and replacement compatibility Lifecycle note: ABB identifies TB840A, product ID 3BSE037760R1, as the pin-compatible replacement for TB840 3BSE021456R1, with hardware changes that do not change the documented functionality. Verify the installed termination unit, optical cabling and redundancy arrangement before replacement.
    Read More +
  • ABB BRC300 P-HC-BRC-30000000 Harmony bridge controller
    ABB · Harmony / Bailey INFI 90 BRC300 Harmony Bridge Controller · Part number P-HC-BRC-30000000 · Rack, Block and S800 I/O support · Composer engineering Controller Family BRC300 Controller Type Harmony rack controller I/O Support Rack, Block and S800 I/O Engineering Tool Composer ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit Harmony rack controller maintenance and replacement projects Installed Bailey, INFI 90 and Harmony control applications Configurations that explicitly specify BRC300 and P-HC-BRC-30000000 Verify Before Order Exact BRC300 controller designation Complete part number P-HC-BRC-30000000 Installed rack, control software, configuration and redundancy arrangement Required I/O communications and adapter or termination hardware Lifecycle note: ABB lifecycle material states that the grey Harmony rack P-HC-BRC300 and P-HC-BRC400 alternatives moved to Limited in January 2015. Confirm the complete installed configuration, hardware revision and compatibility before replacement.
    Read More +
  • ABB DSTC 404 57520001-DS powered terminator
    ABB · Advant S100 I/O DSTC 404 Powered terminator · Order code 57520001-DS · Used with DSTC 452 modem on the SDB side · 260 × 120 × 10 mm Product Type Termination unit Function Powered terminator Used With DSTC 452 modem Net Weight 0.02 kg ✉ info@amikon.cnWhatsApp +86 18020776786 Application & Order CheckBuilt for confident replacement sourcing Application Fit ABB installations using the DSTC 452 modem between SDB and LDB SDB-side termination where one DSTC 404 is specified per modem Intermediate-modem configurations explicitly requiring the powered DSTC 404 Verify Before Order Exact ABB type designation DSTC 404 Complete product ID 57520001-DS DSTC 452 modem and SDB-side application Powered terminator requirement and installed wiring Lifecycle note: Confirm the modem arrangement, SDB/LDB position, powered termination requirement and complete product ID before replacement. Similar DSTC units are not automatically interchangeable.
    Read More +
  • ABB DI810 3BSE008508R1 Digital Input Module
    ABB · S800 I/O DI810 Digital Input Module · 3BSE008508R1 · S800 I/O Signal voltage 24 V DC Input channels 16 channels Isolation 2 × 8 isolated groups Product family S800 I/O Email: sales17@amikon.cnWhatsApp: +86 153 5940 8275 Application & Order CheckBuilt for confident replacement sourcing Application Fit S800 I/O installed-base maintenance Exact DI810 replacement projects Controller I/O and field wiring review Verify Before Order Order code 3BSE008508R1 24 V DC signal and 16 channels review Channel assignment and field wiring Lifecycle note: Confirm the complete installed S800 I/O configuration before replacement or migration.
    Read More +
1 ... 14 15 16 17 18 ... 47
A total of47pages

Available every working day from 8:00AM to 8:00PM Contact us to place an enquiry

Email us : sales1@amikon.cn

Reply within one working day

Visit us

32D Guomao Building, No.388, Hubin South Road, Siming District

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

submit
Contact Us
Location 32D Guomao Building, No.388, Hubin South Road, Siming District

Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.



Copyright @2026 SalesPlc Limited. Sitemap / Blog / XML / Terms And Conditions / Privacy Policy Network Supported

vk YouTube Tiktok Pinterest Reddit teitter linkedin. facebook

leave a message

leave a message
Feel free to communicate any order concerns – we provide quality products and best service.
submit

Home

Products

whatsApp

Contact Us

About Us

Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.

Where to Find Us

32D Guomao Building, No.388, Hubin South Road, Siming District +86 18150117685 sales1@amikon.cn

Follow Us