Vibro-Meter CPUM 200-595-031-111 CPUM Modular CPU and Rack Controller Card
CPUM 200-595-031-111
CPUM Modular CPU and Rack Controller Card · VM600 Rack Controller and Communications Card for Vibro-Meter VM600 Machinery Protection System
Lifecycle note: Use the unit nameplate and current Vibro-Meter documentation as final references before approving a replacement.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales17@amikon.cnWhatsapp/Mob:
+86 15359408275CPUM Modular CPU and Rack Controller Card · Vibro-Meter VM600 Machinery Protection System
Vibro-Meter CPUM 200-595-031-111 is a VM600 CPUM modular CPU card used as the rack controller and communications gateway. The complete PNR records firmware identifier 031 and hardware identifier 111, which must be retained when matching an installed module.
Vibro-Meter CPUM 200-595-031-111 manages VM600 rack configuration, status indication and event handling, communicates with monitoring cards over the VME backplane, and provides external access through Ethernet and serial interfaces. With a compatible IOCN, the controller can exchange data with supervisory software, DCS or PLC systems.
The documented CPUM platform uses an AMD Geode LX800 processor at 500 MHz with 256 MB DRAM. It supports RS-232 and RS-485 serial links, 10/100BASE-TX Ethernet, Modbus RTU/TCP and firmware-dependent PROFINET functions.
Before installing Vibro-Meter CPUM 200-595-031-111, preserve the CPUM configuration, network addresses, Modbus mapping, time settings, IOCN pairing and rack inventory. The full 031-111 suffix must be checked because firmware and hardware changes can affect compatibility.
| Manufacturer | Vibro-Meter |
|---|---|
| Complete model | CPUM 200-595-031-111 |
| Product type | VM600 Rack Controller and Communications Card |
| System family | Vibro-Meter VM600 Machinery Protection System |
| Complete PNR | 200-595-031-111 |
| Firmware identifier | 031 |
| Hardware identifier | 111 |
| Card function | VM600 rack controller and communications gateway |
| Companion card | IOCN input/output and communications interface |
| CPU module | PFM-541I or equivalent |
| Processor | AMD Geode LX800, 500 MHz |
| Memory | 256 MB DRAM |
| CPU-module input | 5 VDC, <1.8 A |
| Primary serial interface | RS-232, up to 115.2 kBaud |
| Secondary serial interface | RS-232 or RS-485, up to 115.2 kBaud |
| Secondary serial isolation | 500 VDC |
| Primary Ethernet | 10/100BASE-TX, up to 100 Mbps, maximum 100 m |
| Secondary Ethernet | 10/100BASE-TX, up to 10 Mbps, maximum 100 m |
| Fieldbus support | Modbus RTU / Modbus TCP; firmware-dependent PROFINET |
| Modbus capacity | Up to 131072 registers/words and 131072 coils/bits total |
| Internal rack interface | VME A24 / D16 master mode |
| Time synchronization | NTP server or battery-backed real-time clock |
| Rack supply | 5 VDC |
| CPUM power consumption | <10 W |
| CPUM / IOCN pair consumption | ≤12 W |
| Operating temperature | −20 to 65°C |
| Storage temperature | −25 to 80°C |
| Humidity | 0 to 90% RH, non-condensing |
| CPUM connectors | NET: 8P8C (RJ45); RS232: DE-9 female |
| Dimensions | 6U × 40 × 187 mm |
| Approximate weight | 0.40 kg |
Use the installed-unit nameplate, current Vibro-Meter documentation and approved site records as final references.
Vibro-Meter CPUM 200-595-031-111 is a VM600 CPUM rack controller and communications gateway identified by firmware 031 and hardware 111.
The CPUM family applicable to Vibro-Meter CPUM 200-595-031-111 uses an AMD Geode LX800 processor at 500 MHz with 256 MB DRAM.
Vibro-Meter CPUM 200-595-031-111 supports CPUM-family Ethernet and serial communication through the CPUM and compatible IOCN interface card; exact routing depends on jumper and firmware configuration.
The documented CPUM platform supports Modbus RTU and Modbus TCP, while PROFINET requires a supported firmware version and approved system configuration.
Vibro-Meter CPUM 200-595-031-111 communicates with supported protection cards through the VM600 VME backplane using A24 / D16 master mode.
Restore the approved configuration for Vibro-Meter CPUM 200-595-031-111, then verify rack inventory, IP settings, serial parameters, Modbus mapping, NTP time synchronization and event logging.
The IOCN paired with Vibro-Meter CPUM 200-595-031-111 must match the installed CPUM hardware, connector routing, serial requirements and rack wiring.
Another CPUM suffix must not replace Vibro-Meter CPUM 200-595-031-111 until firmware, hardware, IOCN compatibility, communications and saved configuration are confirmed.
Provide the complete Vibro-Meter CPUM 200-595-031-111 PNR, revision, serial number, IOCN PNR, rack type, firmware backup, interface requirements, quantity and destination.
Send the complete Vibro-Meter model, revision, quantity, destination and nameplate photo. We will verify identification details before confirming availability and lead time.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming District
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Disclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported
About Us
Reliable Industrial Automation Parts, Global Supply Support SALES PLC works with a broad network of qualified suppliers to provide industrial automation components that meet our customers’ requirements for quality, availability, price, and delivery time. Our product portfolio covers PLC, DCS, HMI, control systems, safety systems, drives, communication modules, and other critical spare parts from leading brands, including Siemens, Emerson, Invensys Triconex, HIMA, GE, ABB, Honeywell, and Bently Nevada. More Than Products — Complete Supply Solutions Our strength goes beyond product sourcing. We work closely with end users, system integrators, maintenance teams, and industrial partners to identify suitable replacement parts and practical procurement solutions. Through integrated purchasing and online support, customers can send inquiries and place orders throughout the year. Our experienced team responds quickly and helps reduce downtime caused by unavailable or obsolete equipment. Our Team Our experienced team brings together product specialists, sourcing professionals, sales consultants, and customer service staff. We work together to provide clear communication and dependable support at every stage of the order. Growing Together for More Than 20 Years For more than 20 years, SALES PLC has continued to grow with the support and trust of customers, suppliers, and business partners around the world. Every project, inquiry, and partnership has helped us improve our service. Looking ahead, we remain committed to providing dependable products, responsive communication, and professional industrial automation solutions. Thank you to every customer and partner who has supported our journey. We look forward to building a stronger and more successful future together. Sustainable Partnerships SALES PLC believes in building long-term, mutually beneficial relationships with customers and suppliers. We focus on honest communication, responsible sourcing, continuous improvement, and reliable service. As industrial technology continues to evolve, we keep expanding our product knowledge and supplier network to support new systems, legacy equipment, and replacement-part requirements. Contact SALES PLC Our team is available during working hours to answer your questions, check product availability, and prepare a quotation.
Where to Find Us
32D Guomao Building, No.388, Hubin South Road, Siming District
+86 18150117685
sales1@amikon.cn
Follow Us
