ABB AI931N 3KDE175513L9310 S900 4-Channel Passive HART Analog Input Module
AI931N
S900 type N AI4H module with four passive 0/4–20 mA inputs, HART-frame transmission and cyclic HART variables for safe-area installations · Article number 3KDE175513L9310
Lifecycle note: Verify article number 3KDE175513L9310, the safe-area classification, passive 0/4–20 mA loop design, external signal supply, HART handling and S900 configuration before replacement.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
info@amikon.cnWhatsapp/Mob:
+86 180207767864-channel passive HART analog input module · S900 Remote I/O
ABB AI931N is a four-channel passive HART analog input module for the S900 remote I/O system. ABB specifies passive inputs for 0/4–20 mA signals.
The N variant is intended for installation in safe, non-hazardous areas. AI931N supports transmission of HART frames through the fieldbus and cyclic HART variables.
The module also provides short-circuit and wire-break detection, electrical isolation between input/bus and input/power, and a common return for all inputs. Verify the passive loop design, article number and HART configuration before replacement.
| Manufacturer | ABB |
|---|---|
| Product family | S900 Remote I/O / ABB Ability System 800xA |
| Model | AI931N (AI4H) |
| Article number | 3KDE175513L9310 |
| Product type | Passive HART analog input module |
| System variant | S900 type N for safe, non-hazardous areas |
| Number of channels | 4 |
| Input type | Passive analog inputs |
| Signal range | 0/4–20 mA |
| HART support | Yes |
| HART functions | Transmission of HART frames via fieldbus; cyclic HART variables |
| Intrinsic safety | No |
| Redundancy | No |
| Diagnostics | Short-circuit and wire-break detection; extended diagnostics |
| Isolation | Electrical isolation between input/bus and input/power |
| Input return | Common return for all inputs |
| Mechanics | S900 |
| Operating ambient temperature | −20 to +60 °C |
| Corrosive atmosphere class | ISA-S71.04 G3 |
| Dimensions (W × D × H) | 20 × 104 × 104 mm |
| Weight | 0.125 kg |
| CE mark | Yes |
Verify article number 3KDE175513L9310, the safe-area classification, passive 0/4–20 mA loop design, external signal supply, HART handling and S900 configuration before replacement.
AI931N is a four-channel S900 type N passive analog input module for 0/4–20 mA signals with HART support.
ABB lists 3KDE175513L9310 as the article number for AI931N.
It provides four passive analog input channels.
ABB describes passive inputs for 0/4–20 mA signals.
It is specified as a passive input module, so the complete loop and external signal-supply arrangement must be checked separately.
Yes. It supports HART-frame transmission through the fieldbus and cyclic HART variables.
No. AI931N is the type N variant for safe, non-hazardous areas.
The module is 20 mm wide, 104 mm deep and 104 mm high, with a listed weight of 0.125 kg.
Confirm article number 3KDE175513L9310, the passive loop design, external supply, signal range, HART configuration and S900 safe-area installation.
Send the model, complete part number, quantity, destination and nameplate photo. We will verify identification details before confirming availability and lead time.
Technical information is based on ABB AI931N (AI4H) Hardware Selector. Final suitability must be verified against the exact installed unit and official documentation.
Email us
Reply within one working dayVisit us
32D Guomao Building, No.388, Hubin South Road, Siming DistrictDisclaimer : Featuredplc sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Featuredplc is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2024 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported