8310
120 VAC/VDC Chassis Power Module - Tricon Chassis Power Supply
Lifecycle note: Use the unit nameplate and current Schneider Electric documentation as final references before approving a replacement.
Product Condition
Original New with One Year WarrantyParts Available
In Stock and Same Day ShippingDelivery Mode
Shipping via DHL Fedex or UPS etcEmail:
sales17@amikon.cnWhatsapp/Mob:
+86 15359408275120 VAC/VDC Chassis Power Module - Tricon Safety System
Triconex 8310 is a 175 W chassis power module designed for 120 VAC or VDC input service in compatible Tricon installations. It supplies the regulated backplane power required by processor, communication and I/O modules.
The 8310 belongs to the Tricon chassis power family and can be applied in supported main, expansion or remote I/O arrangements according to the installed chassis design. Redundant power operation depends on the chassis generation, companion module and incoming supply configuration.
Before replacement, verify the input source, protective device, chassis position, module revision and the identity and status of the companion power module. After installation, confirm normal power indications and stable system diagnostics.
| Manufacturer | Triconex |
|---|---|
| Model | 8310 |
| Product type | Tricon chassis power module |
| Nominal input | 120 VAC or VDC |
| Rated output power | 175 W |
| Chassis context | Compatible Tricon main, expansion and remote I/O chassis |
| Redundancy context | Used in the chassis power architecture defined for the installation |
| Compatibility check | Input supply, chassis generation, module revision and companion power module |
Triconex 8310 is identified as a 175 W chassis power module for 120 VAC or VDC input service in compatible Tricon hardware.
Triconex 8310 is used in supported Tricon main, expansion or remote I/O chassis where the installed design specifies the 120 VAC/VDC power variant.
No. The input-voltage variant, chassis generation, connector and redundant power arrangement must match before any substitution is approved.
Verify supply isolation, incoming voltage, protective device, chassis slot, companion power module and the current diagnostic state.
Inspect the complete label, hardware revision, connector, mechanical guides and evidence of damage before inserting Triconex 8310.
Confirm normal power indications, stable backplane operation, absence of power alarms and successful system diagnostics under the approved procedure.
Provide the complete 8310 nameplate, revision, chassis type, incoming supply, companion module, quantity and destination.
Send the complete Triconex model, revision, quantity, destination and nameplate photo. Identification and compatibility details will be checked before quotation.
Visit us
32D Guomao Building, No.388, Hubin South Road, Siming DistrictDisclaimer : Salesplcauto sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks. Salesplcauto is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Copyright @2026 SalesPlc Limited. Sitemap
/ Blog
/ XML
/ Terms And Conditions
/ Privacy Policy
Network Supported